Design And Implementation Of An Omnidirectional Mobile Robot Platform

Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2008Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2008Bu çalısmada robotik alanında yapılan akademik çalısmaların genis bir bölümünde uygulama gelistirme platformu olarak kullanılmak üzere; gerekli islemci gücü, algılama yetileri, hareket kabiliyeti ve iletisim altyapılarını sunan bir mobil robot platform tasarlanmıs ve gerçeklenmistir. Gerçeklenen robotun tabanı, iki diferansiyel sürümlü platformun üzerine sabitlenmistir. Bu sayede serbestlik derecesi dört olan taban, diferansiyel sürümlü platformları kontrol ederek her yöne hareket edebilme yeteneğine sahiptir. Gerçeklenen mekanik tasarımda, odometri tabanlı hassas konumlandırmanın mümkün olabilmesi için, robotun tasarımının kendine has geometrik avantajlarını kullanarak odometri hatalarının azaltılmasına olanak veren bir yöntem sunulmustur. Hareketli platformun üzerindeki donanım bataryalar, üç eksende hareketli bir kamera, çift çekirdekli bir DSP sistemi, Linux tabanlı bir kontrol kartı, kablosuz ağ ve video bağlantısı, grafik LCD ve detayları sunulmus olan, iki eksende hareketli bir lazer isaretçi ile kameranın kullanıldığı, çalısmaya özel olarak gelistirilmis üç boyutlu mesafe ölçerinden olusmaktadır.In this study, an omnidirectional mobile robot with sufficient processing power, sensory units and communication facilities for being utilized as an application development platform for a wide range of academic research in the field of robotics was designed and implemented. The base plane of the robot is attached onto two differential drive platforms, giving four-degrees-of-freedom to the base. This makes the robot able to move to any direction with proper control of the differential drive platforms, giving the property of omnidirectionality. A method to reduce odometric errors and make odometry based accurate positioning possible was also presented which utilizes the geometrical advantages particular to the robot’s mechanic design. The hardware on the moving base consists of batteries, a camera moving in three axes, a dual core DSP system, a Linux based control card, wireless network and video connection, graphical LCD and a laser pointer moving in two axes. An algorithm that uses the laser and the camera to obtain three dimensional distance measurements was also derived.Yüksek LisansM.Sc

Adaptive Polar-Space Motion Control for Embedded Omnidirectional Mobile Robots with Parameter Variations and Uncertainties

This paper presents an adaptive polar-space motion controller for trajectory tracking and stabilization of a three-wheeled, embedded omnidirectional mobile robot with parameter variations and uncertainties caused by friction, slip and payloads. With the derived dynamic model in polar coordinates, an adaptive motion controller is synthesized via the adaptive backstepping approach. This proposed polar-space robust adaptive motion controller was implemented into an embedded processor using a field-programmable gate array (FPGA) chip. Furthermore, the embedded adaptive motion controller works with a reusable user IP (Intellectual Property) core library and an embedded real-time operating system (RTOS) in the same chip to steer the mobile robot to track the desired trajectory by using hardware/software co-design technique and SoPC (system-on-a-programmable-chip) technology. Simulation results are conducted to show the merit of the proposed polar-space control method in comparison with a conventional proportional-integral (PI) feedback controller and a non-adaptive polar-space kinematic controller. Finally, the effectiveness and performance of the proposed embedded adaptive motion controller are exemplified by conducting several experiments on steering an embedded omnidirectional mobile robot

Proceedings of the 9th Conference on Autonomous Robot Systems and Competitions

Welcome to ROBOTICA 2009. This is the 9th edition of the conference on Autonomous Robot Systems and Competitions, the third time with IEEE‐Robotics and Automation Society Technical Co‐Sponsorship. Previous editions were held since 2001 in Guimarães, Aveiro, Porto, Lisboa, Coimbra and Algarve. ROBOTICA 2009 is held on the 7th May, 2009, in Castelo Branco , Portugal. ROBOTICA has received 32 paper submissions, from 10 countries, in South America, Asia and Europe. To evaluate each submission, three reviews by paper were performed by the international program committee. 23 papers were published in the proceedings and presented at the conference. Of these, 14 papers were selected for oral presentation and 9 papers were selected for poster presentation. The global acceptance ratio was 72%. After the conference, eighth papers will be published in the Portuguese journal Robótica, and the best student paper will be published in IEEE Multidisciplinary Engineering Education Magazine. Three prizes will be awarded in the conference for: the best conference paper, the best student paper and the best presentation. The last two, sponsored by the IEEE Education Society ‐ Student Activities Committee. We would like to express our thanks to all participants. First of all to the authors, whose quality work is the essence of this conference. Next, to all the members of the international program committee and reviewers, who helped us with their expertise and valuable time. We would also like to deeply thank the invited speaker, Jean Paul Laumond, LAAS‐CNRS France, for their excellent contribution in the field of humanoid robots. Finally, a word of appreciation for the hard work of the secretariat and volunteers. Our deep gratitude goes to the Scientific Organisations that kindly agreed to sponsor the Conference, and made it come true. We look forward to seeing more results of R&D work on Robotics at ROBOTICA 2010, somewhere in Portugal

An Autonomous Omnidirectional Robot

RoboCup is an international research and education initiative, which aims to foster artificial intelligence and robotics research by using competitive soccer as a standard problem. This paper presents a detailed engineering design process and the outcome for an omni-directional mobile robot platform for the Robocup Middle Size League competition. A prototype that can move omnidirectionally with kicking capability was designed, built, and tested by a group of senior students. The design included a mechanical base, pneumatic kicking mechanism, a DSP microcontroller-based control system, various sensor interfacing units, and the analysis of omnidirectional motions. The testing results showed that the system was able to move omnidirectionally with a speed of ∼2 m/s and able to kick a size 5 FIFA soccer ball for a distance of at least 5 meters

Mobile robot tank with GPU assistance

Robotic research has been costly and tremendously time consuming; this is due to the cost of sensors, motors, computational unit, physical construction, and fabrication. There are also a lot of man hours clocked in for algorithm design, software development, debugging and optimizing. Robotic vision input usually consists of 2 or more color cameras to construct a 3D virtual space. Additional cameras can also be added to enrich the detailed virtual 3D environment, however, the computational complexity increases when more cameras are added. This is due to not only the additional processing power that is required running the software but also the complexity of stitching multiple cameras together to form a sensor. Another method of creating the 3D virtual space is the utilization of range finder sensors. These types of sensors are usually relatively expensive and still require complex algorithms for calibration and correlation to real life distances. Sensing of a robot position can be facilitated by the addition of accelerometers and gyroscope sensors. A significant robotic design is robot interaction. One type of interaction is through verbal exchange. Such interaction requires an audio input receiver and transmitter on the robot. In order to achieve acceptable recognitions, different types of audio receivers may be implemented and many receivers are required to be deployed. Depending on the environment, noise cancellation hardware and software may be needed to enhance the verbal interaction performance. In this thesis different audio sensors are evaluated and implemented with Microsoft Speech Platform. Any robotic research requires a proper control algorithm and logic process. As a result, the majority of these control algorithms rely heavily on mathematics. High performance computational processing power is needed to process all the raw data in real-time. However, any high performance computation proportionally consumes more energy, so to conserve battery life on the robot, many robotic researchers implement remote computation by processing the raw data remotely. This implementation has one major drawback: in order to transmit raw data remotely, a robust communication infrastructure is needed. Without a robust communication the robot will suffers in failures due to the sheer amount of raw data in communication. I am proposing a solution to the computation problem by harvesting the General Purpose Graphic Processing Unit (GPU)’s computational power for complex mathematical raw data processing. This approach utilizes many-cores parallelism for multithreading real-time computation with a minimum of 10x the computational flops of traditional Central Processing Unit (CPU). By shifting the computation on the GPU the entire computation will be done locally on the robot itself to eliminate the need of any external communication system for remote data processing. While the GPU is used to perform image processing for the robot, the CPU is allowed to dedicate all of its processing power to run the other functions of the robot. Computer vision has been an interesting topic for a while; it utilizes complex mathematical techniques and algorithms in an attempt to achieve image processing in real-time. Open Source Computer Vision Library (OpenCV) is a library consisting of pre-programed image processing functions for several different languages, developed by Intel. This library greatly reduces the amount of development time. Microsoft Kinect for XBOX has all the sensors mentioned above in a single convenient package with first party SDK for software development. I perform the robotic implementation utilizing Microsoft Kinect for XBOX as the primary sensor, OpenCV for image processing functions and NVidia GPU to off-load complex mathematical raw data processing for the robot. This thesis’s objective is to develop and implement a low cost autonomous robot tank with Microsoft Kinect for XBOX as the primary sensor, a custom onboard Small Form Factor (SFF) High Performance Computer (HPC) with NVidia GPU assistance for the primary computation, and OpenCV library for image processing functions

Unlimited-wokspace teleoperation

Thesis (Master)--Izmir Institute of Technology, Mechanical Engineering, Izmir, 2012Includes bibliographical references (leaves: 100-105)Text in English; Abstract: Turkish and Englishxiv, 109 leavesTeleoperation is, in its brief description, operating a vehicle or a manipulator from a distance. Teleoperation is used to reduce mission cost, protect humans from accidents that can be occurred during the mission, and perform complex missions for tasks that take place in areas which are difficult to reach or dangerous for humans. Teleoperation is divided into two main categories as unilateral and bilateral teleoperation according to information flow. This flow can be configured to be in either one direction (only from master to slave) or two directions (from master to slave and from slave to master). In unlimited-workspace teleoperation, one of the types of bilateral teleoperation, mobile robots are controlled by the operator and environmental information is transferred from the mobile robot to the operator. Teleoperated vehicles can be used in a variety of missions in air, on ground and in water. Therefore, different constructional types of robots can be designed for the different types of missions. This thesis aims to design and develop an unlimited-workspace teleoperation which includes an omnidirectional mobile robot as the slave system to be used in further researches. Initially, an omnidirectional mobile robot was manufactured and robot-operator interaction and efficient data transfer was provided with the established communication line. Wheel velocities were measured in real-time by Hall-effect sensors mounted on robot chassis to be integrated in controllers. A dynamic obstacle detection system, which is suitable for omnidirectional mobility, was developed and two obstacle avoidance algorithms (semi-autonomous and force reflecting) were created and tested. Distance information between the robot and the obstacles was collected by an array of sensors mounted on the robot. In the semi-autonomous teleoperation scenario, distance information is used to avoid obstacles autonomously and in the force-reflecting teleoperation scenario obstacles are informed to the user by sending back the artificially created forces acting on the slave robot. The test results indicate that obstacle avoidance performance of the developed vehicle with two algorithms is acceptable in all test scenarios. In addition, two control models were developed (kinematic and dynamic control) for the local controller of the slave robot. Also, kinematic controller was supported by gyroscope

FPGA for Robotic Applications: from Android/Humanoid Robots to Artificial Men

Researches on home robots have been increasing enormously. There has always existed a continuous research effort on problems of anthropomorphic robots which is now called humanoid robots. Currently, robotics has evolved to the point that different branches have reached a remarkable level of maturity, that neural network and fuzzy logic are the main artificial intelligence as intelligent control on the robotics. Despite all this progress, while aiming at accomplishing work-tasks originally charged only to humans, robotic science has perhaps quite naturally turned into the attempt to create artificial men. It is true that artificial men or android humanoid robots open certainly very broad prospects. This “robot” may be viewed as a personal helper, and it will be called a home-robot, or personal robot