An Energy-Efficient Reconfigurable Mobile Memory Interface for Computing Systems

The critical need for higher power efficiency and bandwidth transceiver design has significantly increased as mobile devices, such as smart phones, laptops, tablets, and ultra-portable personal digital assistants continue to be constructed using heterogeneous intellectual properties such as central processing units (CPUs), graphics processing units (GPUs), digital signal processors, dynamic random-access memories (DRAMs), sensors, and graphics/image processing units and to have enhanced graphic computing and video processing capabilities. However, the current mobile interface technologies which support CPU to memory communication (e.g. baseband-only signaling) have critical limitations, particularly super-linear energy consumption, limited bandwidth, and non-reconfigurable data access. As a consequence, there is a critical need to improve both energy efficiency and bandwidth for future mobile devices.;The primary goal of this study is to design an energy-efficient reconfigurable mobile memory interface for mobile computing systems in order to dramatically enhance the circuit and system bandwidth and power efficiency. The proposed energy efficient mobile memory interface which utilizes an advanced base-band (BB) signaling and a RF-band signaling is capable of simultaneous bi-directional communication and reconfigurable data access. It also increases power efficiency and bandwidth between mobile CPUs and memory subsystems on a single-ended shared transmission line. Moreover, due to multiple data communication on a single-ended shared transmission line, the number of transmission lines between mobile CPU and memories is considerably reduced, resulting in significant technological innovations, (e.g. more compact devices and low cost packaging to mobile communication interface) and establishing the principles and feasibility of technologies for future mobile system applications. The operation and performance of the proposed transceiver are analyzed and its circuit implementation is discussed in details. A chip prototype of the transceiver was implemented in a 65nm CMOS process technology. In the measurement, the transceiver exhibits higher aggregate data throughput and better energy efficiency compared to prior works

Transmetteurs photoniques sur silicium pour les transmissions optiques à grande capacité

Les applications exigeant des très nombreuses données (médias sociaux, diffusion vidéo en continu, mégadonnées, etc.) se développent à un rythme rapide, ce qui nécessite de plus en plus de liaisons optiques ultra-rapides. Ceci implique le développment des transmetteurs optiques intégrés et à bas coût et plus particulirement en photonique sur silicium en raison de ses avantages par rapport aux autres technologies (LiNbO3 et InP), tel que la compatibilité avec le procédé de fabrication CMOS. Les modulateurs optoélectronique sont un élément essentiel dans la communication op-tique. Beaucoup de travaux de recherche sont consacrées au développement de dispositifs optiques haut débit efficaces. Cependant, la conception de modulateurs en photonique sur sili-cium (SiP) haut débit est diffcile, principalement en raison de l'absence d'effet électro-optique intrinsèque dans le silicium. De nouvelles approches et de architectures plus performances doivent être développées afin de satisfaire aux critères réliés au système d'une liaison optique aux paramètres de conception au niveau du dispositif integré. En outre, la co-conception de circuits integrés photoniques sur silicium et CMOS est cruciale pour atteindre tout le potentiel de la technologie de photonique sur silicium. Ainsi cette thèse aborde les défits susmentionnés. Dans notre première contribution, nous préesentons pour la première fois un émetteur phononique sur silicium PAM-4 sans utiliser un convertisseur numérique analog (DAC)qui comprend un modulateur Mach Zehnder à électrodes segmentées SiP (LES-MZM) implémenté dans un procédé photonique sur silicium générique avec jonction PN latérale et son conducteur CMOS intégré. Des débits allant jusqu'à 38 Gb/s/chnnel sont obtenus sans utili-ser un convertisseur numérique-analogique externe. Nous présentons également une nouvelle procédure de génération de délai dans le excitateur de MOS complémentaire. Un effet, un délai robuste aussi petit que 7 ps est généré entre les canaux de conduite. Dans notre deuxième contribution, nous présentons pour la première fois un nouveau fac-teur de mérite (FDM) pour les modulateurs SiP qui inclut non seulement la perte optique et l'efficacité (comme les FDMs précédents), mais aussi la bande passante électro-optique du modulateur SiP (BWEO). Ce nouveau FDM peut faire correspondre les paramètres de conception physique du modulateur SiP à ses critères de performance au niveau du système, facilitant à la fois la conception du dispositif optique et l'optimisation du système. Pour la première fois nous définissons et utilisons la pénalité de puissance du modulateur (MPP) induite par le modulateur SiP pour étudier la dégradation des performances au niveau du système induite par le modulateur SiP dans une communication à base de modulation d'amplitude d'impulsion optique. Nous avons développé l'équation pour MPP qui inclut les facteurs de limitation du modulateur (perte optique, taux d'extinction limité et limitation de la bande passante électro-optique). Enfin, dans notre troisième contribution, une nouvelle méthodologie de conception pour les modulateurs en SiP intégré à haute débit est présentée. La nouvelle approche est basée sur la minimisation de la MPP SiP en optimisant l'architecture du modulateur et le point de fonctionnement. Pour ce processus, une conception en longueur unitaire du modulateur Mach Zehnder (MZM) peut être optimisée en suivant les spécifications du procédé de fabrication et les règles de conception. Cependant, la longueur et la tension de biais du d'éphaseur doivent être optimisées ensemble (par exemple selon vitesse de transmission et format de modulation). Pour vérifier l'approche d'optimisation proposée expérimentale mont, a conçu un modulateur photonique sur silicium en phase / quadrature de phase (IQ) ciblant le format de modulation 16-QAM à 60 Gigabaud. Les résultats expérimentaux prouvent la fiabilité de la méthodologie proposée. D'ailleurs, nous avons augmenté la vitesse de transmission jusqu'à 70 Gigabaud pour tester la limite de débit au système. Une transmission de données dos à dos avec des débits binaires de plus de 233 Gigabit/s/channel est observée. Cette méthodologie de conception ouvre ainsi la voie à la conception de la prochaine génération d'émetteurs intégrés à double polarisation 400+ Gigabit/s/channel.Data-hungry applications (social media, video streaming, big data, etc.) are expanding at a fast pace, growing demand for ultra-fast optical links. This driving force reveals need for low-cost, integrated optical transmitters and pushes research in silicon photonics because of its advantages over other platforms (i.e. LiNbO3 and InP), such as compatibility with CMOS fabrication processes, the ability of on-chip polarization manipulation, and cost effciency. Electro-optic modulators are an essential component of optical communication links and immense research is dedicated to developing effcient high-bitrate devices. However, the design of high-capacity Silicon Photonics (SiP) transmitters is challenging, mainly due to lack of inherent electro-optic effect in silicon. New design methodologies and performance merits have to be developed in order to map the system-level criteria of an optical link to the design parameters in device-level. In addition, co-design of silicon photonics and CMOS integrated circuits is crucial to reveal the full potential of silicon photonics. This thesis addresses the aforementioned challenges. In our frst contribution, for the frst time we present a DAC-less PAM-4 silicon photonic transmitter that includes a SiP lumped-element segmented-electrode Mach Zehnder modula-tor (LES-MZM) implemented in a generic silicon photonic process with lateral p-n junction and its co-designed CMOS driver. Using post processing, bitrates up to 38 Gb/s/channel are achieved without using an external digital to analog converter. We also presents a novel delay generation procedure in the CMOS driver. A robust delay as small as 7 ps is generated between the driving channels. In our second contribution, for the frst time we present a new figure of merit (FOM) for SiP modulators that includes not only the optical loss and effciency (like the prior FOMs), but also the SiP modulator electro-optic bandwidth ( BWEO). This new FOM can map SiP modulator physical design parameters to its system-level performance criteria, facilitating both device design and system optimization. For the frst time we define and employ the modulator power penalty (MPP) induced by the SiP modulator to study the system level performance degradation induced by SiP modulator in an optical pulse amplitude modulation link. We develope a closed-form equation for MPP that includes the SiP modulator limiting factors (optical loss, limited extinction ratio and electro-optic bandwidth limitation). Finally in our third contribution, we present a novel design methodology for integrated high capacity SiP modulators. The new approach is based on minimizing the power penalty of a SiP modulator (MPP) by optimizing modulator design and bias point. For the given process, a unit-length design of Mach Zehnder modulator (MZM) can be optimized following the process specifications and design rules. However, the length and the bias voltage of the phase shifter must be optimized together in a system context (e.g., baud rate and modulation format). Moreover, to verify the proposed optimization approach in experiment, we design an in-phase/quadrature-phase (IQ) silicon photonic modulator targeting 16-QAM modulation format at 60 Gbaud. Experimental results proves the reliability of our proposed methodology. We further push the baud rate up to 70 Gbaud to examine the capacity boundary of the device. Back to back data transmission with bitrates more than 233 Gb/s/channel are captured. This design methodology paves the way for designing the next generation of integrated dual- polarization 400+ Gb/s/channel transmitters

Cross-Layer Pathfinding for Off-Chip Interconnects

Off-chip interconnects for integrated circuits (ICs) today induce a diverse design space, spanning many different applications that require transmission of data at various bandwidths, latencies and link lengths. Off-chip interconnect design solutions are also variously sensitive to system performance, power and cost metrics, while also having a strong impact on these metrics. The costs associated with off-chip interconnects include die area, package (PKG) and printed circuit board (PCB) area, technology and bill of materials (BOM). Choices made regarding off-chip interconnects are fundamental to product definition, architecture, design implementation and technology enablement. Given their cross-layer impact, it is imperative that a cross-layer approach be employed to architect and analyze off-chip interconnects up front, so that a top-down design flow can comprehend the cross-layer impacts and correctly assess the system performance, power and cost tradeoffs for off-chip interconnects. Chip architects are not exposed to all the tradeoffs at the physical and circuit implementation or technology layers, and often lack the tools to accurately assess off-chip interconnects. Furthermore, the collaterals needed for a detailed analysis are often lacking when the chip is architected; these include circuit design and layout, PKG and PCB layout, and physical floorplan and implementation. To address the need for a framework that enables architects to assess the system-level impact of off-chip interconnects, this thesis presents power-area-timing (PAT) models for off-chip interconnects, optimization and planning tools with the appropriate abstraction using these PAT models, and die/PKG/PCB co-design methods that help expose the off-chip interconnect cross-layer metrics to the die/PKG/PCB design flows. Together, these models, tools and methods enable cross-layer optimization that allows for a top-down definition and exploration of the design space and helps converge on the correct off-chip interconnect implementation and technology choice. The tools presented cover off-chip memory interfaces for mobile and server products, silicon photonic interfaces, 2.5D silicon interposers and 3D through-silicon vias (TSVs). The goal of the cross-layer framework is to assess the key metrics of the interconnect (such as timing, latency, active/idle/sleep power, and area/cost) at an appropriate level of abstraction by being able to do this across layers of the design flow. In additional to signal interconnect, this thesis also explores the need for such cross-layer pathfinding for power distribution networks (PDN), where the system-on-chip (SoC) floorplan and pinmap must be optimized before the collateral layouts for PDN analysis are ready. Altogether, the developed cross-layer pathfinding methodology for off-chip interconnects enables more rapid and thorough exploration of a vast design space of off-chip parallel and serial links, inter-die and inter-chiplet links and silicon photonics. Such exploration will pave the way for off-chip interconnect technology enablement that is optimized for system needs. The basis of the framework can be extended to cover other interconnect technology as well, since it fundamentally relates to system-level metrics that are common to all off-chip interconnects

Survey of Photonic and Plasmonic Interconnect Technologies for Intra-Datacenter and High-Performance Computing Communications

Large scale data centers (DC) and high performance computing (HPC) systems require more and more computing power at higher energy efficiency. They are already consuming megawatts of power, and a linear extrapolation of trends reveals that they may eventually lead to unrealistic power consumption scenarios in order to satisfy future requirements (e.g., Exascale computing). Conventional complementary metal oxide semiconductor (CMOS)-based electronic interconnects are not expected to keep up with the envisioned future board-to-board and chip-to-chip (within multi-chip-modules) interconnect requirements because of bandwidth-density and power-consumption limitations. However, low-power and high-speed optics-based interconnects are emerging as alternatives for DC and HPC communications; they offer unique opportunities for continued energy-efficiency and bandwidth-density improvements, although cost is a challenge at the shortest length scales. Plasmonics-based interconnects on the other hand, due to their extremely small size, offer another interesting solution for further scaling operational speed and energy efficiency. At the device-level, CMOS compatibility is also an important issue, since ultimately photonics or plasmonics will have to be co-integrated with electronics. In this paper, we survey the available literature and compare the aforementioned interconnect technologies, with respect to their suitability for high-speed and energy-efficient on-chip and offchip communications. This paper refers to relatively short links with potential applications in the following interconnect distance hierarchy: local group of racks, board to board, module to module, chip to chip, and on chip connections. We compare different interconnect device modules, including low-energy output devices (such as lasers, modulators, and LEDs), photodetectors, passive devices (i.e., waveguides and couplers) and electrical circuitry (such as laserdiode drivers, modulator drivers, transimpedance, and limiting amplifiers). We show that photonic technologies have the potential to meet the requirements for selected HPC and DC applications in a shorter term. We also present that plasmonic interconnect modules could offer ultra-compact active areas, leading to high integration bandwidth densities, and low device capacitances allowing for ultra-high bandwidth operation that would satisfy the application requirements further into the future

Convergence of millimeter-wave and photonic interconnect systems for very-high-throughput digital communication applications

In the past, radio-frequency signals were commonly used for low-speed wireless electronic systems, and optical signals were used for multi-gigabit wired communication systems. However, as the emergence of new millimeter-wave technology introduces multi-gigabit transmission over a wireless radio-frequency channel, the borderline between radio-frequency and optical systems becomes blurred. As a result, there come ample opportunities to design and develop next-generation broadband systems to combine the advantages of these two technologies to overcome inherent limitations of various broadband end-to-end interconnect systems in signal generation, recovery, synchronization, and so on. For the transmission distances of a few centimeters to thousands of kilometers, the convergence of radio-frequency electronics and optics to build radio-over-fiber systems ushers in a new era of research for the upcoming very-high-throughput broadband services. Radio-over-fiber systems are believed to be the most promising solution to the backhaul transmission of the millimeter-wave wireless access networks, especially for the license-free, very-high-throughput 60-GHz band. Adopting radio-over-fiber systems in access or in-building networks can greatly extend the 60-GHz signal reach by using ultra-low loss optical fibers. However, such high frequency is difficult to generate in a straightforward way. In this dissertation, the novel techniques of homodyne and heterodyne optical-carrier suppressions for radio-over-fiber systems are investigated and various system architectures are designed to overcome these limitations of 60-GHz wireless access networks, bringing the popularization of multi-gigabit wireless networks to become closer to the reality. In addition to the advantages for the access networks, extremely high spectral efficiency, which is the most important parameter for long-haul networks, can be achieved by radio-over-fiber signal generation. As a result, the transmission performance of spectrally efficient radio-over-fiber signaling, including orthogonal frequency division multiplexing and orthogonal wavelength division multiplexing, is broadly and deeply investigated. On the other hand, radio-over-fiber is also used for the frequency synchronization that can resolve the performance limitation of wireless interconnect systems. A novel wireless interconnects assisted by radio-over-fiber subsystems is proposed in this dissertation. In conclusion, multiple advantageous facets of radio-over-fiber systems can be found in various levels of end-to-end interconnect systems. The rapid development of radio-over-fiber systems will quickly change the conventional appearance of modern communications.PhDCommittee Chair: Gee-Kung Chang; Committee Member: Bernard Kippelen; Committee Member: Shyh-Chiang Shen; Committee Member: Thomas K. Gaylord; Committee Member: Umakishore Ramachandra

Integrated Circuits/Microchips

With the world marching inexorably towards the fourth industrial revolution (IR 4.0), one is now embracing lives with artificial intelligence (AI), the Internet of Things (IoTs), virtual reality (VR) and 5G technology. Wherever we are, whatever we are doing, there are electronic devices that we rely indispensably on. While some of these technologies, such as those fueled with smart, autonomous systems, are seemingly precocious; others have existed for quite a while. These devices range from simple home appliances, entertainment media to complex aeronautical instruments. Clearly, the daily lives of mankind today are interwoven seamlessly with electronics. Surprising as it may seem, the cornerstone that empowers these electronic devices is nothing more than a mere diminutive semiconductor cube block. More colloquially referred to as the Very-Large-Scale-Integration (VLSI) chip or an integrated circuit (IC) chip or simply a microchip, this semiconductor cube block, approximately the size of a grain of rice, is composed of millions to billions of transistors. The transistors are interconnected in such a way that allows electrical circuitries for certain applications to be realized. Some of these chips serve specific permanent applications and are known as Application Specific Integrated Circuits (ASICS); while, others are computing processors which could be programmed for diverse applications. The computer processor, together with its supporting hardware and user interfaces, is known as an embedded system.In this book, a variety of topics related to microchips are extensively illustrated. The topics encompass the physics of the microchip device, as well as its design methods and applications

Bulletin of The University of New Hampshire. Undergraduate Catalog 1988-1989

The Bulletin of the University of New Hampshire Undergraduate Catalog contains general information about the university. It is published twice in December, January, and February, and once each in March, April, July, and August

Bulletin of The University of New Hampshire. Undergraduate Catalog 1987-1988

The Bulletin of the University of New Hampshire Undergraduate Catalog contains general information about the university. It is published twice in December, January, and February, and once each in March, April, July, and August