24,372 research outputs found
Effect of Diethylenetriamine and Triethylamine sensitization on the critical diameter of Nitromethane
In this work, the critical diameter for detonation was measured for Nitromethane (NM) sensitized with two different amines: Diethylenetriamine (DETA) and Triethylamine (TEA). The critical diameter in glass and polyvinylchloride tubes is found to decrease rapidly as the amount of sensitizer is increased, then increase past a critical amount of sensitizer. Thus the critical diameter reaches a minimum at a critical concentration of sensitizer. It was also found that the critical diameter is lower with DETA than with TEA
Effect of sensitization on the electrochemical properties of nanostructured NiO
Screen-printed NiO electrodes were sensitized with 11 different dyes and the respective
electrochemical properties were analyzed in a three-electrode cell with the techniques of cyclic
voltammetry and electrochemical impedance spectroscopy. The dye sensitizers of NiO were organic
molecules of different types (e.g., squaraines, coumarins, and derivatives of triphenyl-amines and
erythrosine B), which were previously employed as sensitizers of the same oxide in dye-sensitized
solar cells of p-type (p-DSCs). Depending on the nature of the sensitizer, diverse types of interactions
occurred between the immobilized sensitizer and the screen-printed NiO electrode at rest and
under polarization. The impedance data recorded at open circuit potential were interpreted in
terms of two different equivalent circuits, depending on the eventual presence of the dye sensitizer
on the mesoporous electrode. The fitting parameter of the charge transfer resistance through the
electrode/electrolyte interface varied in accordance to the differences of the passivation action exerted
by the various dyes against the electrochemical oxidation of NiO. Moreover, it has been observed that
the resistive term RCT associated with the process of dark electron transfer between the dye and NiO
substrate is strictly correlated to the overall efficiency of the photoconversion () of the corresponding
p-DSC, which employs the same dye-sensitized electrode as photocathode
Sodium hydroxide pretreatment as an effective approach to reduce the dye/holes recombination reaction in P-Type DSCs
We report the synthesis of a novel squaraine dye (VG21-C12) and investigate its behavior
as p-type sensitizer for p-type Dye-Sensitized Solar Cells. The results are compared
with O4-C12, a well-known sensitizer for p-DSC, and sodium hydroxide pretreatment
is described as an effective approach to reduce the dye/holes recombination. Various
variable investigation such as dipping time, dye loading, photocurrent, and resulting cell
efficiency are also reported. Electrochemical impedance spectroscopy (EIS) was utilized
for investigating charge transport properties of the different photoelectrodes and the
recombination phenomena that occur at the (un)modified electrode/electrolyte interface
Photo-FETs: phototransistors enabled by 2D and 0D nanomaterials
The large diversity of applications in our daily lives that rely on photodetection technology requires photodetectors with distinct properties. The choice of an adequate photodetecting system depends on its application, where aspects such as spectral selectivity, speed, and sensitivity play a critical role. High-sensitivity photodetection covering a large spectral range from the UV to IR is dominated by photodiodes. To overcome existing limitations in sensitivity and cost of state-of-the-art systems, new device architectures and material systems are needed with low-cost fabrication and high performance. Low-dimensional nanomaterials (0D, 1D, 2D) are promising candidates with many unique electrical and optical properties and additional functionalities such as flexibility and transparency. In this Perspective, the physical mechanism of photo-FETs (field-effect transistors) is described and recent advances in the field of low-dimensional photo-FETs and hybrids thereof are discussed. Several requirements for the channel material are addressed in view of the photon absorption and carrier transport process, and a fundamental trade-off between them is pointed out for single-material-based devices. We further clarify how hybrid devices, consisting of an ultrathin channel sensitized with strongly absorbing semiconductors, can circumvent these limitations and lead to a new generation of highly sensitive photodetectors. Recent advances in the development of sensitized low-dimensional photo-FETs are discussed, and several promising future directions for their application in high-sensitivity photodetection are proposed.Peer ReviewedPostprint (author's final draft
Riboflavin-sensitized photooxidation of Ceftriaxone and Cefotaxime: kinetic study and effect on Staphylococcus aureus
Trace amounts of the widely used β-lactam antibiotics (Atbs) in waste water may cause adverse effects on the ecosystems and contribute to the proliferation of antibiotic-resistant bacteria. On these grounds, kinetic and mechanistic aspects of photosensitized degradation of Ceftriaxone (Cft) and Cefotaxime (Ctx), have been studied in pure water by stationary and time-resolved techniques. Additionally, possible implications of these photoprocesses on the antimicrobial activity of the Atbs have also been investigated. Photoirradiation of aqueous solutions of Cft and Ctx produces the degradation of both Atbs in the presence of Riboflavin (vitamin B2), a well known pigment dissolved in natural aquatic systems. The process occurs through Type I and Type II mechanisms, with effective prevalence of the former. The participation of O2−, OH and O2(1Δg) is supported by experiments of oxygen consumption carried out in the presence of specific scavengers for such reactive oxygen species. Microbiological assays exhibit a parallelism between the rate of Cft and Ctx photodegradation and the loss of their bactericidal capacity on Staphylococcus aureus strains. Results contribute to both understanding kinetic and mechanism aspects of the degradation and predicting on natural decay of Atbs waste water-contaminants.Fil: Reynoso, Eugenia. Universidad Nacional de RÃo Cuarto. Facultad de Ciencias Exactas FisicoquÃmicas y Naturales. Departamento de QuÃmica; Argentina. Consejo Nacional de Investigaciones CientÃficas y Técnicas; ArgentinaFil: Spesia, Mariana Belen. Universidad Nacional de RÃo Cuarto. Facultad de Ciencias Exactas FisicoquÃmicas y Naturales. Departamento de QuÃmica; Argentina. Consejo Nacional de Investigaciones CientÃficas y Técnicas; ArgentinaFil: Garcia, Norman Andino. Universidad Nacional de RÃo Cuarto. Facultad de Ciencias Exactas FisicoquÃmicas y Naturales. Departamento de QuÃmica; Argentina. Consejo Nacional de Investigaciones CientÃficas y Técnicas; ArgentinaFil: Biasutti, Maria Alicia. Universidad Nacional de RÃo Cuarto. Facultad de Ciencias Exactas FisicoquÃmicas y Naturales. Departamento de QuÃmica; Argentina. Consejo Nacional de Investigaciones CientÃficas y Técnicas; ArgentinaFil: Criado, Susana Noemi. Universidad Nacional de RÃo Cuarto. Facultad de Ciencias Exactas FisicoquÃmicas y Naturales. Departamento de QuÃmica; Argentina. Consejo Nacional de Investigaciones CientÃficas y Técnicas; Argentin
Water splitting with polyoxometalate-treated photoanodes: Enhancing performance through sensitizer design
Visible light driven water oxidation has been demonstrated at near-neutral pH using photoanodes based on nanoporous films of TiO2, polyoxometalate (POM) water oxidation catalyst [{Ru4O4(OH)2(H2O)4}(γ-SiW10O36)2]10- (1), and both known photosensitizer [Ru(bpy)2(H4dpbpy)]2+ (P2) and the novel crown ether functionalized dye [Ru(5-crownphen)2(H2dpbpy)] (H22). Both triads, containing catalyst 1, and catalyst-free dyads, produce O2 with high faradaic efficiencies (80 to 94%), but presence of catalyst enhances quantum yield by up to 190% (maximum 0.39%). New sensitizer H22 absorbs light more strongly than P2, and increases O2 quantum yields by up to 270%. TiO2-2 based photoelectrodes are also more stable to desorption of active species than TiO2-P2: losses of catalyst 1 are halved when pH > TiO2 point-of-zero charge (pzc), and losses of sensitizer reduced below the pzc (no catalyst is lost when pH < pzc). For the triads, quantum yields of O2 are higher at pH 5.8 than at pH 7.2, opposing the trend observed for 1 under homogeneous conditions. This is ascribed to lower stability of the dye oxidized states at higher pH, and less efficient electron transfer to TiO2, and is also consistent with the 4th 1-to-dye electron transfer limiting performance rather than catalyst TOFmax. Transient absorption reveals that TiO2-2-1 has similar 1st electron transfer dynamics to TiO2-P2-1, with rapid (ps timescale) formation of long-lived TiO2(e-)-2-1(h+) charge separated states, and demonstrates that metallation of the crown ether groups (Na+/Mg2+) has little or no effect on electron transfer from 1 to 2. The most widely relevant findings of this study are therefore: (i) increased dye extinction coefficients and binding stability significantly improve performance in dye-sensitized water splitting systems; (ii) binding of POMs to electrode surfaces can be stabilized through use of recognition groups; (iii) the optimal homogeneous and TiO2-bound operating pHs of a catalyst may not be the same; and (iv) dye-sensitized TiO2 can oxidize water without a catalyst
Occupational Asthma or Work-Related Exacerbation of Asthma
[Excerpt] Occupational asthma is asthma due to work exposures. It can be caused by a specific workplace agent with a specific immune system response – the agent is called a sensitizer. It has been recommended that whenever an adult experiences new-onset asthma, occupational asthma should be suspected. The respiratory symptoms of occupational asthma include wheezing, shortness of breath, chest tightness, cough, and sputum production. While these are similar to asthma that is not work-related, these symptoms occur due to a work-related exposure
- …