703 research outputs found
Collapse of the N=28 shell closure in Si
The energies of the excited states in very neutron-rich Si and
P have been measured using in-beam -ray spectroscopy from the
fragmentation of secondary beams of S at 39 A.MeV. The low 2
energy of Si, 770(19) keV, together with the level schemes of
P provide evidence for the disappearance of the Z=14 and N=28
spherical shell closures, which is ascribed mainly to the action of
proton-neutron tensor forces. New shell model calculations indicate that
Si is best described as a well deformed oblate rotor.Comment: 4 pages, 3 figures, accepted for publication in Phys. Rev. let
Radial Growth of Qilian Juniper on the Northeast Tibetan Plateau and Potential Climate Associations
There is controversy regarding the limiting climatic factor for tree radial growth at the alpine treeline on the northeastern Tibetan Plateau. In this study, we collected 594 increment cores from 331 trees, grouped within four altitude belts spanning the range 3550 to 4020 m.a.s.l. on a single hillside. We have developed four equivalent ring-width chronologies and shown that there are no significant differences in their growth-climate responses during 1956 to 2011 or in their longer-term growth patterns during the period AD 1110–2011. The main climate influence on radial growth is shown to be precipitation variability. Missing ring analysis shows that tree radial growth at the uppermost treeline location is more sensitive to climate variation than that at other elevations, and poor tree radial growth is particularly linked to the occurrence of serious drought events. Hence water limitation, rather than temperature stress, plays the pivotal role in controlling the radial growth of Sabina przewalskii Kom. at the treeline in this region. This finding contradicts any generalisation that tree-ring chronologies from high-elevation treeline environments are mostly indicators of temperature changes
Facile Synthesis of High Quality Graphene Nanoribbons
Graphene nanoribbons have attracted attention for their novel electronic and
spin transport properties1-6, and because nanoribbons less than 10 nm wide have
a band gap that can be used to make field effect transistors. However,
producing nanoribbons of very high quality, or in high volumes, remains a
challenge. Here, we show that pristine few-layer nanoribbons can be produced by
unzipping mildly gas-phase oxidized multiwalled carbon nanotube using
mechanical sonication in an organic solvent. The nanoribbons exhibit very high
quality, with smooth edges (as seen by high-resolution transmission electron
microscopy), low ratios of disorder to graphitic Raman bands, and the highest
electrical conductance and mobility reported to date (up to 5e2/h and 1500
cm2/Vs for ribbons 10-20 nm in width). Further, at low temperature, the
nanoribbons exhibit phase coherent transport and Fabry-Perot interference,
suggesting minimal defects and edge roughness. The yield of nanoribbons was ~2%
of the starting raw nanotube soot material, which was significantly higher than
previous methods capable of producing high quality narrow nanoribbons1. The
relatively high yield synthesis of pristine graphene nanoribbons will make
these materials easily accessible for a wide range of fundamental and practical
applications.Comment: Nature Nanotechnology in pres
Spectroscopic studies of Dy-168,170 using CLARA and PRISMA
Preliminary results from an experiment aiming at Dy-170. Submitted to the LNL
Annual Report 2008.Comment: 2 pages, 4 figures, Submitted to the LNL Annual Report 200
In-beam spectroscopic studies of S nucleus
The structure of the S nucleus has been studied at GANIL through the
one proton knock-out reaction from a Cl secondary beam at 42
AMeV. The rays following the de-excitation of S were
detected in flight using the 70 BaF detectors of the Ch\^{a}teau de
Cristal array. An exhaustive -coincidence analysis allowed an
unambiguous construction of the level scheme up to an excitation energy of 3301
keV. The existence of the spherical 2 state is confirmed and three new
-ray transitions connecting the prolate deformed 2 level were
observed. Comparison of the experimental results to shell model calculations
further supports a prolate and spherical shape coexistence with a large mixing
of states built on the ground state band in S.Comment: 6 pages, 5 figures, accepted for publication in Physical Review
Immunohistochemical insights into Saffold virus infection of the brain of juvenile AG129 mice
Synthesis and Photoluminescence Property of Silicon Carbide Nanowires Via Carbothermic Reduction of Silica
Silicon carbide nanowires have been synthesized at 1400 °C by carbothermic reduction of silica with bamboo carbon under normal atmosphere pressure without metallic catalyst. X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, transmission electron microscopy and Fourier transformed infrared spectroscopy were used to characterize the silicon carbide nanowires. The results show that the silicon carbide nanowires have a core–shell structure and grow along <111> direction. The diameter of silicon carbide nanowires is about 50–200 nm and the length from tens to hundreds of micrometers. The vapor–solid mechanism is proposed to elucidate the growth process. The photoluminescence of the synthesized silicon carbide nanowires shows significant blueshifts, which is resulted from the existence of oxygen defects in amorphous layer and the special rough core–shell interface
Prevalence and Associated Factors of Dyslipidemia in the Adult Chinese Population
To determine the prevalence, associated factors, awareness and control of dyslipidemia in Chinese living in Greater Beijing, we measured the serum cholesterol concentration in 3251 Chinese adults (age: 45 to 89 years) as participants of the population-based Beijing Eye Study 2006. Additional information on treatment of dyslipidemia was obtained using a standard questionnaire. The mean concentrations of total, HDL cholesterol, LDL cholesterol and triglycerides were 4.92±1.01 mmol/L, 1.61±0.36 mmol/L, 2.88±0.85 mmol/L, and 1.76±1.29 mmol/L, respectively. Prevalence of dyslipidemia was 56.1±0.9%%. Presence of dyslipidemia was significantly associated with increasing age (odds ratio (OR):1.02; 95% confidence interval (CI): 1.01, 1.03), female gender (OR:1.51; 95%CI: 1.25, 1.83), urban region (OR:1.82; 95%CI: 1.30, 2.55), body mass index (OR:1.13; 95%CI: 1.10, 1.15), income (OR:1.11; 95%CI:1.02, 1.21), blood glucose concentration (OR:1.10; 95%CI:1.05, 1.16), diastolic blood pressure (OR:1.02; 95%CI: 1.01, 1.03), and smoking (OR:1.23; 1.01, 1.51). Among those who had dyslipidemia, the proportion of subjects who were aware, treated and controlled was 50.9%, 23.8%, and 39.91%, respectively. The awareness rate was associated with urban region (P = 0.001; OR: 6.50), body mass index (P = 0.001; OR:1.06), and income (P = 0.02; OR:1.14). The data suggest that dyslipidemia may be present in about 56% of the population aged 45+ years in Greater Beijing. Factors likely associated with dyslipidemia were higher age, female gender, urban region, higher body mass index, higher income, higher blood concentration of glucose, higher diastolic blood pressure, and smoking. In the examined study population, treatment rate was 24% with about 60% of the treated subjects still having uncontrolled dyslipidemia
Genome structure of cotton revealed by a genome-wide SSR genetic map constructed from a BC1 population between gossypium hirsutum and G. barbadense
<p>Abstract</p> <p>Background</p> <p>Cotton, with a large genome, is an important crop throughout the world. A high-density genetic linkage map is the prerequisite for cotton genetics and breeding. A genetic map based on simple polymerase chain reaction markers will be efficient for marker-assisted breeding in cotton, and markers from transcribed sequences have more chance to target genes related to traits. To construct a genome-wide, functional marker-based genetic linkage map in cotton, we isolated and mapped expressed sequence tag-simple sequence repeats (EST-SSRs) from cotton ESTs derived from the A<sub>1</sub>, D<sub>5</sub>, (AD)<sub>1</sub>, and (AD)<sub>2 </sub>genome.</p> <p>Results</p> <p>A total of 3177 new EST-SSRs developed in our laboratory and other newly released SSRs were used to enrich our interspecific BC<sub>1 </sub>genetic linkage map. A total of 547 loci and 911 loci were obtained from our EST-SSRs and the newly released SSRs, respectively. The 1458 loci together with our previously published data were used to construct an updated genetic linkage map. The final map included 2316 loci on the 26 cotton chromosomes, 4418.9 cM in total length and 1.91 cM in average distance between adjacent markers. To our knowledge, this map is one of the three most dense linkage maps in cotton. Twenty-one segregation distortion regions (SDRs) were found in this map; three segregation distorted chromosomes, Chr02, Chr16, and Chr18, were identified with 99.9% of distorted markers segregating toward the heterozygous allele. Functional analysis of SSR sequences showed that 1633 loci of this map (70.6%) were transcribed loci and 1332 loci (57.5%) were translated loci.</p> <p>Conclusions</p> <p>This map lays groundwork for further genetic analyses of important quantitative traits, marker-assisted selection, and genome organization architecture in cotton as well as for comparative genomics between cotton and other species. The segregation distorted chromosomes can be a guide to identify segregation distortion loci in cotton. The annotation of SSR sequences identified frequent and rare gene ontology items on each chromosome, which is helpful to discover functions of cotton chromosomes.</p
Recommended from our members
It’s all about the money? A qualitative study of healthcare worker motivation in urban China
Background
China’s healthcare reform programme continues to receive much attention. Central to these discussions has been how the various financial incentives underpinning reform efforts are negatively impacting on the healthcare workforce. Research continues to document these trends, however, qualitative analysis of how these incentives impact on the motivation of healthcare workers remains underdeveloped. Furthermore, the application of motivational theories to make sense of healthcare worker experiences has yet to be undertaken.
Methods
The purpose of our paper is to present a comparative case study account of healthcare worker motivation across urban China. It draws on semi structured interviews (n = 89) with a range of staff and organisations across three provinces. In doing so, the paper analyses how healthcare worker motivation is influenced by a variety of financial incentives; how motivation is influenced by the opportunities for career development; and how motivation is influenced by the day to day pressures of meeting patient expectations.
Results
The experience of healthcare workers in China highlights how a reliance on financial incentives has challenged their ability to maintain the values and ethos of public service. Our findings suggest greater attention needs to be paid to the motivating factors of improved income and career development. Further work is also needed to nurture and develop the motivation of healthcare workers through the building of trust between fellow workers, patients, and the public.
Conclusions
Through the analysis of healthcare worker motivation, our paper presents a number of ways China can improve its current healthcare reform efforts. It draws on the experience of other countries in calling for policy makers to support alternative approaches to healthcare reform that build on multiple channels of motivation to support healthcare workers
- …