26 research outputs found
Recommended from our members
Quantification of Trace Volatile Sulfur Compounds in Milk by Solid-Phase Microextraction and Gas Chromatography–Pulsed Flame Photometric Detection
Volatile sulfur compounds have been reported to be
responsible for the sulfurous off-flavors generated during
the thermal processing of milk; however, their analysis
has been a challenge due to their high reactivity,
high volatility, and low sensory threshold. In this study,
reactive thiols were stabilized and the volatile sulfur
compounds in milk were extracted by headspace solidphase
microextraction, and analyzed by gas chromatography
and pulsed-flame photometric detection. Calibration
curves for 7 sulfur-containing compounds were constructed
in milk by the standard addition technique.
Raw, pasteurized, and UHT milk samples with various
fat contents were analyzed. Compared with raw and
pasteurized samples, UHT milk contained substantially
higher concentrations of hydrogen sulfide, methanethiol,
carbon disulfide, dimethyl trisulfide, and dimethyl
sulfoxide. The high odor activity values calculated
for methanethiol and dimethyl trisulfide
suggested that these 2 compounds, in addition to dimethyl
sulfide reported in a previous study, could be
the most important contributors to the sulfurous note
in UHT milkKeywords: volatile sulfur, milk off-flavor, solid-phase microextraction, pulsed-flame photometric detectionOriginally published in Journal of Dairy Science (http://www.journalofdairyscience.org/) and copyrighted by the American Dairy Science Association
Recommended from our members
Quantitative determination of thermally derived off-flavor compounds in milk using solid-phase microextraction and gas chromatography
Many volatile compounds generated during the thermal processing of milk have been associated with cooked, stale, and sulfurous notes in milk and are considered as off-flavor by most consumers. A headspace solid-phase microextraction (HS-SPME)/gas chromatographic technique for the quantitative analysis of thermally derived off-flavor compounds was developed in this study. The extraction temperature, time, and sample amount were optimized using a randomized 23 central composite rotatable design with 2 central replicates and 2 replicates in each factorial point along with response surface methodology. Calibration curves were constructed in milk using the standard addition technique, and then used to quantify 20 off-flavor compounds in raw, pasteurized, and UHT milk samples with various fat contents. The concentrations of these volatiles in raw and pasteurized milk samples were not significantly different. However, dimethyl sulfide, 2-hexanone, 2-heptanone, 2-nonanone, 2-undecanone, 2-methylpropanal, 3-methylbutanal, heptanal, and decanal were found at higher concentrations in UHT milk as compared with raw and pasteurized milk samples. In addition, the concentration of methyl ketones was greater in UHT milk with higher fat content. The calculated odor activity values suggested that 2,3-butanedione, 2-heptanone, 2-nonanone, 2-methylpropanal, 3-methylbutanal, nonanal, decanal, and dimethyl sulfide could be important contributors to the off-flavor of UHT milk. The HS-SPME technique developed in this study is accurate and relatively simple, and can be used for the quantification of thermally derived off-flavor compounds in milk.First published in Journal of Dairy Science (http://www.journalofdairyscience.org/). Copyrighted by the American Dairy Science Association.Keywords: milk, off-flavor, solid-phase microextraction, quantificatio
Evaluation of bread quality and volatile compounds of breads made by sourdoughs fermented by sediments of pulque (xaxtle) as starter culture
Sourdough is an important modern fermentation method of cereal flour and water. The fermentation process is carried out by lactic acid bacteria (LAB) and yeasts which confer specific flavor characteristics to the bread. The main aim of this research was to investigate the bread quality and volatile compounds of breads made by sourdoughs inoculated with sediments of pulque (xaxtle) used it as starter culture. Fifty five volatile compounds were found in the bread made with sourdoughs inoculated with xaxtle from three different regions of Mexico. Using gas chromatography-mass spectrometry, compounds as 3-hydroxy-2-butanone; 3-methyl-1-butanol; 2-methyl, 1-butanol; dimethyl disulfide; furfural, nonanal, phenyl ethyl alcohol and butanoic acid were presented in the flavor profile of the breads and having a positive response to sensory analysis made by evaluators. The xaxtle of Nanacamilpa (XN) and the xaxtle of Villa Alta (XV) were the best breads getting 8.3±0.03, 8.8±0.02, 6.2±0.08 and 8.2±0.01 scores in a scale from 0 to 10 in color, smell, texture and flavor attributes respectively which are positive attributes in favor of the quality bread. As a result of fermentation sourdough with LAB and yeasts from the xaxtle during 24 hours (30°
C), the bread made with the sourdough inoculated with xaxtle of Milpa Alta (XM) showed the major acid flavor therefore its sample was less acceptable getting 8.1±0.01, 7.8±0.02, 5.3±0.01 and 7.9±0.01 in the same attributes evaluated. The xaxtle of Nanacamilpa, Tlaxcala (XN) run better than the others as starter fermentation culture for sourdoughs
The abundant marine bacterium Pelagibacter simultaneously catabolizes dimethylsulfoniopropionate to the gases dimethyl sulfide and methanethiol
Marine phytoplankton produce ~109 tons of dimethylsulfoniopropionate (DMSP) per year1,2, an estimated 10% of which is catabolized by bacteria through the DMSP cleavage pathway to the climatically active gas dimethyl sulfide (DMS)3,4. SAR11 Alphaproteobacteria (order Pelagibacterales), the most abundant chemoorganotrophic bacteria in the oceans, have been shown to assimilate DMSP into biomass, thereby supplying this cell’s unusual requirement for reduced sulfur5,6. Here we report that Pelagibacter HTCC1062 produces the gas methanethiol (MeSH) and that simultaneously a second DMSP catabolic pathway, mediated by a cupin-like DMSP lyase, DddK, shunts as much as 59% of DMSP uptake to DMS production. We propose a model in which the allocation of DMSP between these pathways is kinetically controlled to release increasing amounts of DMS as the supply of DMSP exceeds cellular sulfur demands for biosynthesis
Recommended from our members
Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study
Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat
Recommended from our members
Correction to: Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study
The original version of this article unfortunately contained a mistake
Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study
Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat
The use of Mexican xaxtle as leavening agent in Italian straight dough bread making to produce pulque bread
The "pulque bread" is traditionally produced in Mexico using as starter culture the xaxtle. mixed together with wheat flour, milk, eggs, margarine and cane sugar. The high nutritional value of this typical bread, which is characterized by a low glycemic index as well as high concentration of several prebiotic compounds, together with phytase enzymes, seems to be due to the use of xaxtle as leavening agent. The aim of this research was to determine the microbial composition of dough and the physical chemical characteristics of the bread obtained using xaxtle as starter cultures in straight dough bread making, following the traditional protocol generally adopted by Italian artisan bread-makers. According to the discussed experimental evidences, it is possible to conclude that freeze-dried xaxtle could be employed as starter culture in bread making and the microbial association developed during the dough ripening is characterized by the presence of both yeast and lactic bacteria strains
Microbiological and physicochemical properties of meat coated with microencapsulated Mexican oregano (Lippia graveolens Kunth) and basil (Ocimum basilicum L.) essential oils mixture
Microencapsulated essential oils (EOs) are increasingly used to protect the safety of foods due to their natural origin. The aim of this work was to determine the chemical composition of Mexican oregano (Lippia graveolens Kunth) (MOEO) and basil (Ocimum basilicum L.) (BEO) EOs, their combined effect against E. coli O157:H7, Lactobacillus plantarum, Brochothrix thermosphacta and Pseudomonas fragi, and their effect on microbiological and physicochemical properties of coated pork meat. EOs chemical composition was determined by GC/MS, their microencapsulated mixture (4 mg MOEO/mL/11 mg BEO/mL) was added to a filmogenic dispersion. Fluorescent probes were used to study the antimicrobial filmogenic active dispersion (FD) effect. Pork meat pieces were coated without microencapsulated EOs (CC), using FD (AC), or uncoated (C), vacuum packed and stored 28 days at 4 °C. Thymol (28.9%) and linalool (23.7%) were the major components of MOEO and BEO, respectively. The cell membrane of all bacteria was damaged by contact with FD. FD-coated samples (AC) exhibited the lowest concentration of 2-thiobarbituric acid reacting substances (TBARS) (0.027 ± 0.001 mg malonaldehyde/kg meat) and natural microbiota growth, while odor and color were the most accepted by untrained judges (range > 6). Coatings added with microencapsulated EOs mixture are a natural food preservation alternative to increase the shelf life of refrigerated meat products