36 research outputs found

    Impact of COVID-19 on cardiovascular testing in the United States versus the rest of the world

    Get PDF
    Objectives: This study sought to quantify and compare the decline in volumes of cardiovascular procedures between the United States and non-US institutions during the early phase of the coronavirus disease-2019 (COVID-19) pandemic. Background: The COVID-19 pandemic has disrupted the care of many non-COVID-19 illnesses. Reductions in diagnostic cardiovascular testing around the world have led to concerns over the implications of reduced testing for cardiovascular disease (CVD) morbidity and mortality. Methods: Data were submitted to the INCAPS-COVID (International Atomic Energy Agency Non-Invasive Cardiology Protocols Study of COVID-19), a multinational registry comprising 909 institutions in 108 countries (including 155 facilities in 40 U.S. states), assessing the impact of the COVID-19 pandemic on volumes of diagnostic cardiovascular procedures. Data were obtained for April 2020 and compared with volumes of baseline procedures from March 2019. We compared laboratory characteristics, practices, and procedure volumes between U.S. and non-U.S. facilities and between U.S. geographic regions and identified factors associated with volume reduction in the United States. Results: Reductions in the volumes of procedures in the United States were similar to those in non-U.S. facilities (68% vs. 63%, respectively; p = 0.237), although U.S. facilities reported greater reductions in invasive coronary angiography (69% vs. 53%, respectively; p < 0.001). Significantly more U.S. facilities reported increased use of telehealth and patient screening measures than non-U.S. facilities, such as temperature checks, symptom screenings, and COVID-19 testing. Reductions in volumes of procedures differed between U.S. regions, with larger declines observed in the Northeast (76%) and Midwest (74%) than in the South (62%) and West (44%). Prevalence of COVID-19, staff redeployments, outpatient centers, and urban centers were associated with greater reductions in volume in U.S. facilities in a multivariable analysis. Conclusions: We observed marked reductions in U.S. cardiovascular testing in the early phase of the pandemic and significant variability between U.S. regions. The association between reductions of volumes and COVID-19 prevalence in the United States highlighted the need for proactive efforts to maintain access to cardiovascular testing in areas most affected by outbreaks of COVID-19 infection

    Global, regional, and national burden of disorders affecting the nervous system, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

    Get PDF
    BackgroundDisorders affecting the nervous system are diverse and include neurodevelopmental disorders, late-life neurodegeneration, and newly emergent conditions, such as cognitive impairment following COVID-19. Previous publications from the Global Burden of Disease, Injuries, and Risk Factor Study estimated the burden of 15 neurological conditions in 2015 and 2016, but these analyses did not include neurodevelopmental disorders, as defined by the International Classification of Diseases (ICD)-11, or a subset of cases of congenital, neonatal, and infectious conditions that cause neurological damage. Here, we estimate nervous system health loss caused by 37 unique conditions and their associated risk factors globally, regionally, and nationally from 1990 to 2021.MethodsWe estimated mortality, prevalence, years lived with disability (YLDs), years of life lost (YLLs), and disability-adjusted life-years (DALYs), with corresponding 95% uncertainty intervals (UIs), by age and sex in 204 countries and territories, from 1990 to 2021. We included morbidity and deaths due to neurological conditions, for which health loss is directly due to damage to the CNS or peripheral nervous system. We also isolated neurological health loss from conditions for which nervous system morbidity is a consequence, but not the primary feature, including a subset of congenital conditions (ie, chromosomal anomalies and congenital birth defects), neonatal conditions (ie, jaundice, preterm birth, and sepsis), infectious diseases (ie, COVID-19, cystic echinococcosis, malaria, syphilis, and Zika virus disease), and diabetic neuropathy. By conducting a sequela-level analysis of the health outcomes for these conditions, only cases where nervous system damage occurred were included, and YLDs were recalculated to isolate the non-fatal burden directly attributable to nervous system health loss. A comorbidity correction was used to calculate total prevalence of all conditions that affect the nervous system combined.FindingsGlobally, the 37 conditions affecting the nervous system were collectively ranked as the leading group cause of DALYs in 2021 (443 million, 95% UI 378–521), affecting 3·40 billion (3·20–3·62) individuals (43·1%, 40·5–45·9 of the global population); global DALY counts attributed to these conditions increased by 18·2% (8·7–26·7) between 1990 and 2021. Age-standardised rates of deaths per 100 000 people attributed to these conditions decreased from 1990 to 2021 by 33·6% (27·6–38·8), and age-standardised rates of DALYs attributed to these conditions decreased by 27·0% (21·5–32·4). Age-standardised prevalence was almost stable, with a change of 1·5% (0·7–2·4). The ten conditions with the highest age-standardised DALYs in 2021 were stroke, neonatal encephalopathy, migraine, Alzheimer's disease and other dementias, diabetic neuropathy, meningitis, epilepsy, neurological complications due to preterm birth, autism spectrum disorder, and nervous system cancer.InterpretationAs the leading cause of overall disease burden in the world, with increasing global DALY counts, effective prevention, treatment, and rehabilitation strategies for disorders affecting the nervous system are needed

    Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

    Get PDF
    Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat

    Utilising non-composite steel-concrete-steel panels for protective structures

    Get PDF
    A high-performance protective structure utilising non-composite steel-concrete-steel (SCS) sandwich panels for protecting buildings and facilities against close-range detonation of VBIEDs and heavy ve-hicle impacts has been developed. Unlike other existing composite sandwich panels, no shear connec-tors between the steel faceplates are utilised to construct protective panels in order to simplify the con-struction process. The concrete core of the panel is included to provide the mass for increased inertia effects, and the steel faceplates are designed to develop tensile membrane resistance at large displace-ment to dissipate impulsive energy. The energy dissipation capability and high ductility of the axially-restrained non-composite SCS panels have been verified through a series of high energy impact tests on scaled panels using the drop hammer facility at UoW. High-fidelity finite element models for the pro-tective barriers were developed and subjected to close range detonation of high explosive using the non-linear explicit dynamics code LS-DYNA. Using the validated modelling techniques, a full-scale blast barrier structure composed of non-composite sandwich panels and steel posts was studies for its performance to provide resistance against close range bomb explosion. It was established that the non-composite SCS barrier construction could provide a highly effective means for protecting critical facili-ties and personnel against effects of an external bomb attack

    Static flexural behaviour of externally post-tensioned steel-concrete composite beams

    No full text
    Composite steel-concrete beams are used widely in bridge and building construction as the main structural elements in flexure. Bridges, throughout the world have a design life and this may be reduced if traffic flows are increased or environmental degradation occurs. Similarly, building beams may become compromised for serviceability or strength when loads on floor systems are increased. These changes may reduce the design life and strength of such members and thus replacement or retrofitting may need to be considered. One method of retrofitting (stiffening and strengthening) a composite steel-concrete beam is to externally post-tension the beam. The application of external post-tensioning also has the effect of increasing the fatigue life of such members. This paper provides a set of detailed experiments on both a conventional and prestressed composite steel-concrete beam. A numerical model is then developed for the load-deflection response and this is calibrated with the test data. An extensive parametric study is then conducted to consider the influence of various parameters on the behaviour of these beams. Finally a rigid plastic analysis procedure is presented and calibrated with the test results with good effect. This procedure is considered to be amenable for design in assessing the flexural strength

    Numerical simulation of high-performance SCS panels under static and impact loading conditions

    No full text
    Studies are currently being conducted at the University of Wollongong to utilise axially restrained non-composite steel-concrete-steel (SCS) panels in designing high performance protective structures against close-range explosive detonations. The proposed sandwich panels do not utilize shear connectors to connect the steel faceplates to the concrete core. High effectiveness in resisting blast and impact loads is achieved through special detailing of the flared end connections that provide axial fixity aswell as restraining the relative movement between the concrete core and the steel faceplates.This paper presents three-dimensional finite element modelling techniques to simulate the response of these panels under static and impact loading conditions using non-linear explicit finite element code LS-Dyna. Three high-fidelity models were developed to calibrate the experimental results and it is found that the numerical models are able to describe the behaviour of protective panels under static and dynamic loadings with reasonable accuracy

    Effect of medium strain rates on mechanical properties of the high performance steels

    No full text
    In this study an investigation into the effect that medium strain rates have on the mechanical properties of cold drawn mild steel and 304 stainless steel has been carried out using 6 mm diameter cylindrical specimens. The tests were performed using an Instron test machine under a quasi-static strain rate, and a high capacity instrumented falling weight axial impact (IFWI) test rig. The axial load time histories were measured by a load cell connected to each specimen and the deformation time history by a strain gauge attached to each specimen. All the data was acquired by a high-speed data acquisition system at a sampling frequency of 300 kHz. The load histories showed high frequency oscillations and were digitally filtered by using a fourth order low pass Butterworth filter. The results showed that the yield stress and tensile strength of both types of steels increased with an increased rate of strain
    corecore