63 research outputs found

    BdGT43B2 functions in xylan biosynthesis and is essential for seedling survival in Brachypodium distachyon.

    Get PDF
    Xylan is the predominant hemicellulose in the primary cell walls of grasses, but its synthesis and interactions with other wall polysaccharides are complex and incompletely understood. To probe xylan biosynthesis, we generated CRISPR/Cas9 knockout and amiRNA knockdown lines of BdGT43B2, an ortholog of the wheat TaGT43-4 xylan synthase scaffolding protein in the IRX14 clade, in Brachypodium distachyon. Knockout of BdGT43B2 caused stunting and premature death in Brachypodium seedlings. Immunofluorescence labeling of xylans was greatly reduced in homozygous knockout BdGT43B2 mutants, whereas cellulose labeling was unchanged or slightly increased. Biochemical analysis showed reductions in digestible xylan in knockout mutant walls, and cell size was smaller in knockout leaves. BdGT43B2 knockdown plants appeared morphologically normal as adults, but showed slight reductions in seedling growth and small decreases in xylose content in isolated cell walls. Immunofluorescence labeling of xylan and cellulose staining was both reduced in BdGT43B2 knockdown plants. Together, these data indicate that BdGT43B2 functions in the synthesis of a form of xylan that is required for seedling growth and survival in Brachypodium distachyon

    Characterisation of FUT4 and FUT6 α-(1 → 2)-fucosyltransferases reveals that absence of root arabinogalactan fucosylation increases Arabidopsis root growth salt sensitivity.

    Get PDF
    Plant type II arabinogalactan (AG) polysaccharides are attached to arabinogalactan proteins (AGPs) at hydroxyproline residues, and they are very diverse and heterogeneous structures. The AG consists of a β-(1 → 3)-linked galactan backbone with β-(1 → 6)-galactan side chains that are modified mainly with arabinose, but they may also contain glucuronic acid, rhamnose or other sugars. Here, we studied the positions of fucose substitutions in AGPs, and we investigated the functions of this fucosylation. Monosaccharide analysis of Arabidopsis leaf AGP extracts revealed a significant reduction in L-Fucose content in the fut4 mutant, but not in the fut6 mutant. In addition, Fucose was reduced in the fut4 mutant in root AGP extracts and was absent in the fut4/fut6 mutant. Curiously, in all cases reduction of fucose was accompanied with a reduction in xylose levels. The fucosylated AGP structures in leaves and roots in wild type and fut mutant plants were characterised by sequential digestion with AG specific enzymes, analysis by Polysaccharide Analysis using Carbohydrate gel Electrophoresis, and Matrix Assisted Laser Desorption/Ionisation (MALDI)-Time of Flight Mass spectrometry (MS). We found that FUT4 is solely responsible for the fucosylation of AGPs in leaves. The Arabidopsis thaliana FUT4 and FUT6 genes have been previously proposed to be non-redundant AG-specific fucosyltransferases. Unexpectedly, FUT4 and FUT6 enzymes both fucosylate the same AGP structures in roots, suggesting partial redundancy to each other. Detailed structural characterisation of root AGPs with high energy MALDI-Collision Induced Dissociation MS and NMR revealed an abundant unique AG oligosaccharide structure consisting of terminal xylose attached to fucose. The loss of this structure in fut4/fut6 mutants explains the reduction of both fucose and xylose in AGP extracts. Under salt-stress growth conditions the fut4/fut6 mutant lacking AGP fucosylation exhibited a shorter root phenotype than wild type plants, implicating fucosylation of AGPs in maintaining proper cell expansion under these conditions

    Development of an oligosaccharide library to characterise the structural variation in glucuronoarabinoxylan in the cell walls of vegetative tissues in grasses.

    Get PDF
    BACKGROUND: Grass glucuronoarabinoxylan (GAX) substitutions can inhibit enzymatic degradation and are involved in the interaction of xylan with cell wall cellulose and lignin, factors which contribute to the recalcitrance of biomass to saccharification. Therefore, identification of xylan characteristics central to biomass biorefining improvement is essential. However, the task of assessing biomass quality is complicated and is often hindered by the lack of a reference for a given crop. RESULTS: In this study, we created a reference library, expressed in glucose units, of Miscanthus sinensis GAX stem and leaf oligosaccharides, using DNA sequencer-Assisted Saccharide analysis in high throughput (DASH), supported by liquid chromatography (LC), nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry (MS). Our analysis of a number of grass species highlighted variations in substitution type and frequency of stem and leaf GAX. In miscanthus, for example, the β-Xylp-(1 → 2)-α-Araf-(1 → 3) side chain is more abundant in leaf than stem. CONCLUSIONS: The reference library allows fast identification and comparison of GAX structures from different plants and tissues. Ultimately, this reference library can be used in directing biomass selection and improving biorefining

    Xylan Structure and Dynamics in Native <i>Brachypodium</i> Grass Cell Walls Investigated by Solid-State NMR Spectroscopy.

    Get PDF
    The polysaccharide composition and dynamics of the intact stem and leaf cell walls of the model grass Brachypodium distachyon are investigated to understand how developmental stage affects the polysaccharide structure of grass cell walls. 13C enrichment of the entire plant allowed detailed analysis of the xylan structure, side-chain functionalization, dynamics, and interaction with cellulose using magic-angle-spinning solid-state NMR spectroscopy. Quantitative one-dimensional 13C NMR spectra and two-dimensional 13C-13C correlation spectra indicate that stem and leaf cell walls contain less pectic polysaccharides compared to previously studied seedling primary cell walls. Between the stem and the leaf, the secondary cell wall-rich stem contains more xylan and more cellulose compared to the leaf. Moreover, the xylan chains are about twofold more acetylated and about 60% more ferulated in the stem. These highly acetylated and ferulated xylan chains adopt a twofold conformation more prevalently and interact more extensively with cellulose. These results support the notion that acetylated xylan is found more in the twofold screw conformation, which preferentially binds cellulose. This in turn promotes cellulose-lignin interactions that are essential for the formation of the secondary cell wall

    L-Fucose-containing arabinogalactan-protein in radish leaves.

    Get PDF
    The carbohydrate moieties of arabinogalactan-proteins (AGPs) have β-(1 → 3)-galactan backbones to which side chains of (1 → 6)-linked β-Gal residues are attached through O-6. Some of these side chains are further substituted with other sugars. We investigated the structure of L-Fuc-containing oligosaccharides released from the carbohydrate moieties of a radish leaf AGP by digestion with α-L-arabinofuranosidase, followed by exo-β-(1 → 3)-galactanase. We detected a series of neutral β-(1 → 6)-galactooligosaccharides branching variously at O-3 of the Gal residues, together with corresponding acidic derivatives terminating in 4-O-methyl-GlcA (4-Me-GlcA) or GlcA at the non-reducing terminals. In neutral oligosaccharides with degree of polymerization (dp) mainly higher than 10, L-Fuc groups were attached through L-Ara residues as the sequence, α-L-Fucp-(1 → 2)-α-L-Araf-(1 →. This sequence was verified by isolation of the pentasaccharide α-L-Fuc-(1 → 2)-α-L-Araf-(1 → 3)-β-Gal-(1 → 6)-β-Gal-(1 → 6)-Gal upon digestion of the higher oligosaccharides with endo-β-(1 → 6)-galactanase. By contrast, in lower polymerized (predominantly dp 4) acidic oligosaccharides, L-Fuc groups were attached directly at the non-reducing terminals through α-(1 → 2)-linkages, resulting in the release of the tetrasaccharides, α-L-Fucp-(1 → 2)-β-GlcA-(1 → 6)-β-Gal-(1 → 6)-Gal and α-L-Fucp-(1 → 2)-β-4-Me-GlcA-(1 → 6)-β-Gal-(1 → 6)-Gal. In long acidic oligosaccharides with dp mainly higher than 13, L-Fuc groups localized on branches were attached to the uronic acids directly and/or L-Ara residues as in the neutral oligosaccharides.The authors would like to thank Prof. M. Hisamatsu, Mie University, Tsu, Japan, for a gift of cyclic β-(1→2)-glucan. This work was supported by the Ministry of Education, Culture, Sports, Science, and Technology of Japan (Grant-in-Aid for Scientific Research no. 23570048 to Y.T. and no. 24114006 to Y.T. and T.K.). Support was also provided by BBSRC Sustainable Bioenergy Centre: Cell wall sugars program (Grant No. BB/G016240/1) to P.D.This is the final version of the article. It first appeared from Elsevier via http://dx.doi.org/10.1016/j.carres.2015.07.00

    Action of an endo-β-1,3(4)-glucanase on cellobiosyl unit structure in barley β-1,3:1,4-glucan.

    Get PDF
    β-1,3:1,4-Glucan is a major cell wall component accumulating in endosperm and young tissues in grasses. The mixed linkage glucan is a linear polysaccharide mainly consisting of cellotriosyl and cellotetraosyl units linked through single β-1,3-glucosidic linkages, but it also contains minor structures such as cellobiosyl units. In this study, we examined the action of an endo-β-1,3(4)-glucanase from Trichoderma sp. on a minor structure in barley β-1,3:1,4-glucan. To find the minor structure on which the endo-β-1,3(4)-glucanase acts, we prepared oligosaccharides from barley β-1,3:1,4-glucan by endo-β-1,4-glucanase digestion followed by purification by gel permeation and paper chromatography. The endo-β-1,3(4)-glucanase appeared to hydrolyze an oligosaccharide with degree of polymerization 5, designated C5-b. Based on matrix-assisted laser desorption/ionization (MALDI) time-of-flight (ToF)/ToF-mass spectrometry (MS)/MS analysis, C5-b was identified as β-Glc-1,3-β-Glc-1,4-β-Glc-1,3-β-Glc-1,4-Glc including a cellobiosyl unit. The results indicate that a type of endo-β-1,3(4)-glucanase acts on the cellobiosyl units of barley β-1,3:1,4-glucan in an endo-manner.This work was supported in part by a grant-in-aid for Scientific Research to T. Kotake [Grant-in-Aid for Scientific Research no. 25514001] from Japan Society of the Promotion of Science; Y. Tsumuraya and T. Kotake [Grant-in-Aid for Scientific Research no. 24114006] from the Ministry of Education, Culture, Sports, Science, and Technology of Japan. Supports were also provided by BBSRC Sustainable Bioenergy Centre: Cell wall sugars program to P. Dupree [grant number BB/G016240/1].This is the final version of the article. It first appeared from Taylor & Francis via http://dx.doi.org/10.1080/09168451.2015.104636

    Evolution of Xylan Substitution Patterns in Gymnosperms and Angiosperms: Implications for Xylan Interaction with Cellulose.

    Get PDF
    The interaction between cellulose and xylan is important for the load-bearing secondary cell wall of flowering plants. Based on the precise, evenly spaced pattern of acetyl and glucuronosyl (MeGlcA) xylan substitutions in eudicots, we recently proposed that an unsubstituted face of xylan in a 2-fold helical screw can hydrogen bond to the hydrophilic surfaces of cellulose microfibrils. In gymnosperm cell walls, any role for xylan is unclear, and glucomannan is thought to be the important cellulose-binding polysaccharide. Here, we analyzed xylan from the secondary cell walls of the four gymnosperm lineages (Conifer, Gingko, Cycad, and Gnetophyta). Conifer, Gingko, and Cycad xylan lacks acetylation but is modified by arabinose and MeGlcA. Interestingly, the arabinosyl substitutions are located two xylosyl residues from MeGlcA, which is itself placed precisely on every sixth xylosyl residue. Notably, the Gnetophyta xylan is more akin to early-branching angiosperms and eudicot xylan, lacking arabinose but possessing acetylation on alternate xylosyl residues. All these precise substitution patterns are compatible with gymnosperm xylan binding to hydrophilic surfaces of cellulose. Molecular dynamics simulations support the stable binding of 2-fold screw conifer xylan to the hydrophilic face of cellulose microfibrils. Moreover, the binding of multiple xylan chains to adjacent planes of the cellulose fibril stabilizes the interaction further. Our results show that the type of xylan substitution varies, but an even pattern of xylan substitution is maintained among vascular plants. This suggests that 2-fold screw xylan binds hydrophilic faces of cellulose in eudicots, early-branching angiosperm, and gymnosperm cell walls.This work was supported by the Leverhulme Trust Centre for Natural Material Innovation (MBW, PD), The Low Carbon Energy University Alliance (AL), BBSRC Grant: BB/G016240/1 BBSRC Sustainable Bioenergy Centre cell wall sugars (TT, PD) and the Sao Paulo Research Foundation (RLS, CSP, MSS, TCFG) (Grants 2013/08293-7, 2014/10448-1 and 2015/25031-1)

    Aspen Tension Wood Fibers Contain β-(1→4)-Galactans and Acidic Arabinogalactans Retained by Cellulose Microfibrils in Gelatinous Walls

    Get PDF
    Contractile cell walls are found in various plant organs and tissues such as tendrils, contractile roots, and tension wood. The tension-generating mechanism is not known but is thought to involve special cell wall architecture. We previously postulated that tension could result from the entrapment of certain matrix polymers within cellulose microfibrils. As reported here, this hypothesis was corroborated by sequential extraction and analysis of cell wall polymers that are retained by cellulose microfibrils in tension wood and normal wood of hybrid aspen (Populus tremula × Populus tremuloides). β-(1→4)-Galactan and type II arabinogalactan were the main large matrix polymers retained by cellulose microfibrils that were specifically found in tension wood. Xyloglucan was detected mostly in oligomeric form in the alkali-labile fraction and was enriched in tension wood. β-(1→4)-Galactan and rhamnogalacturonan I backbone epitopes were localized in the gelatinous cell wall layer. Type II arabinogalactans retained by cellulose microfibrils had a higher content of (methyl)glucuronic acid and galactose in tension wood than in normal wood. Thus, β-(1→4)-galactan and a specialized form of type II arabinogalactan are trapped by cellulose microfibrils specifically in tension wood and, thus, are the main candidate polymers for the generation of tensional stresses by the entrapment mechanism. We also found high β-galactosidase activity accompanying tension wood differentiation and propose a testable hypothesis that such activity might regulate galactan entrapment and, thus, mechanical properties of cell walls in tension wood.This work was supported by the Swedish Governmental Agency for Innovation Systems, the Swedish Research Council, the Russian Foundation for Basic Research (grant nos. 15–04–02560 and 15–04–05721), and the Biotechnology and Biological Sciences Research Council (grant no. BB/G016240/1 and funds from the Sustainable Energy Centre Cell Wall Sugars Programme).This is the author accepted manuscript. The final version is available from the American Society of Plant Biologists via http://dx.doi.org/10.​1104/​pp.​15.​0069

    The pattern of xylan acetylation suggests xylan may interact with cellulose microfibrils as a twofold helical screw in the secondary plant cell wall of Arabidopsis thaliana.

    Get PDF
    The interaction between xylan and cellulose microfibrils is important for secondary cell wall properties in vascular plants; however, the molecular arrangement of xylan in the cell wall and the nature of the molecular bonding between the polysaccharides are unknown. In dicots, the xylan backbone of β-(1,4)-linked xylosyl residues is decorated by occasional glucuronic acid, and approximately one-half of the xylosyl residues are O-acetylated at C-2 or C-3. We recently proposed that the even, periodic spacing of GlcA residues in the major domain of dicot xylan might allow the xylan backbone to fold as a twofold helical screw to facilitate alignment along, and stable interaction with, cellulose fibrils; however, such an interaction might be adversely impacted by random acetylation of the xylan backbone. Here, we investigated the arrangement of acetyl residues in Arabidopsis xylan using mass spectrometry and NMR. Alternate xylosyl residues along the backbone are acetylated. Using molecular dynamics simulation, we found that a twofold helical screw conformation of xylan is stable in interactions with both hydrophilic and hydrophobic cellulose faces. Tight docking of xylan on the hydrophilic faces is feasible only for xylan decorated on alternate residues and folded as a twofold helical screw. The findings suggest an explanation for the importance of acetylation for xylan-cellulose interactions, and also have implications for our understanding of cell wall molecular architecture and properties, and biological degradation by pathogens and fungi. They will also impact strategies to improve lignocellulose processing for biorefining and bioenergy.The work conducted by TT and NN was supported by a grant from the BBSRC: BB/G016240/1 BBSRC Sustainable Energy Centre Cell Wall Sugars Programme (BSBEC) to PD and DNB. The work of PD was supported by the European Community’s Seventh Framework Programme SUNLIBB (FP7/2007-2013) under the grant agreement #251132. The NMR facility infrastructure was supported by the BBSRC and the Wellcome Trust. TCFG thanks CNPq (Brazil) for a graduate fellowship (grant # 140978/2009-7). MSS thanks CEPROBIO (grant # 490022/2009- 0) and FAPESP for funding (grant #2013/08293-7).This is the accepted version of the following article: "Busse-Wicher, M; Gomes, T.C.F; Tryfona, T; Nikolovski, N; Stott, K; Grantham, N.J; Bolam, D.N; Skaf, M.S; Dupree, P. (2014) "The pattern of xylan acetylation suggests xylan may interact with cellulose microfibrils as a two-fold helical screw in the secondary plant cell wall of Arabidopsis thaliana." The Plant Journal. Accepted article [electronic] 10.1111/tpj.12575", which has been published in final form at http://onlinelibrary.wiley.com/doi/10.1111/tpj.12575/abstrac
    • …
    corecore