Development of a Large Scale, High Speed Wheel Test Facility

Draper Laboratory, with its internal research and development budget, has for the past two years been funding a joint effort with the Massachusetts Institute of Technology (MIT) for the development of a large scale, high speed wheel test facility. This facility was developed to perform experiments and carry out evaluations on levitation and propulsion designs for MagLev systems currently under consideration. The facility was developed to rotate a large (2 meter) wheel which could operate with peripheral speeds of greater than 100 meters/second. The rim of the wheel was constructed of a non-magnetic, non-conductive composite material to avoid the generation of errors from spurious forces. A sensor package containing a multi-axis force and torque sensor mounted to the base of the station, provides a signal of the lift and drag forces on the package being tested. Position tables mounted on the station allow for the introduction of errors in real time. A computer controlled data acquisition system was developed around a Macintosh IIfx to record the test data and control the speed of the wheel. This paper describes the development of this test facility. A detailed description of the major components is presented. Recently completed tests carried out on a novel Electrodynamic (EDS) suspension system, developed by MIT as part of this joint effort are described and presented. Adaptation of this facility for linear motor and other propulsion and levitation testing is described

Breaking waves on a dynamic Hele-Shaw beach

We report the formation of quasi-steady beaches and dunes via breaking waves in our tabletop ‘Hele-Shaw’ beach experiment. Breaking waves are generated by a wave maker, and zeolite particles act as sand. The tank is narrow, just over one-particle diameter wide, creating a quasi-2D set-up. Classical breaker types are observed on a time-scale of about a second. Beach formation under breakers occurs on a longer time-scale, and is a matter of minutes for a range of mono-chromatic wave frequencies. Alternating the wave maker motion between two frequencies generally leads to beach formation but occasionally to formation of a stable dune with water on either side. Finally, the Hele-Shaw configuration explored here experimentally lends itself to multi-scale modeling of beach dynamics

From the granular Leidenfrost state to buoyancy-driven convection

Grains inside a vertically vibrated box undergo a transition from a density-inverted and horizontally homogeneous state, referred to as the granular Leidenfrost state, to a buoyancy-driven convective state. We perform a simulational study of the precursors of such a transition and quantify their dynamics as the bed of grains is progressively fluidized. The transition is preceded by transient convective states, which increase their correlation time as the transition point is approached. Increasingly correlated convective flows lead to density fluctuations, as quantified by the structure factor, that also shows critical behavior near the transition point. The amplitude of the modulations in the vertical velocity field are seen to be best described by a quintic supercritical amplitude equation with an additive noise term. The validity of such an amplitude equation, and previously observed collective semiperiodic oscillations of the bed of grains, suggests a new interpretation of the transition analogous to a coupled chain of vertically vibrated damped oscillators. Increasing the size of the container shows metastability of convective states, as well as an overall invariant critical behavior close to the transition

Revisiting Hele-Shaw dynamics to better understand beach evolution

Wave action, particularly during storms, drives the evo lution of beaches. Beach evolution by non-linear break ing waves is poorly understood due to its three-dimensional character, the range of scales involved, and our limited understanding of particle-wave interactions. We show how a novel, three-phase extension to the classic “Hele-Shaw” laboratory experiment can be designed that creates beach morphologies with breaking waves in a quasi-two-dimensional setting. Our thin Hele-Shaw cell simplifies the inherent complexity of three-phase dynamics: all dynamics become clearly visible and measurable. We show that beaches can be created in tens of minutes by several types of breaking waves, with about one-second periods. Quasi-steady beach morphologies emerge as function of initial water depth, at-rest bed level and wave-maker frequency. These are classified mathematically and lead to beaches, berms and sand bars

A review of recent work on the discrete particle method at the University of Twente: an introduction to the open-source package MercuryDPM

In this paper we review some recent advances in DEM (DPM) modelling undertaken at the University of Twente. We introduce the new open-source package MercuryDPM that we have been developing over the last few years.\ud MercuryDPM is an object-oriented program with a simple C++ implementation and includes: support for moving and complex walls, such as polyhedra or screw-threads; state-of-the-art granular contact models; multi-species support; specialised classes, allowing the easy implementation of common geometries like chutes, hoppers, etc.; common handler interfaces for particles, walls and boundaries (so all type of objects are changed using the same interfaces); restarting; large self-test suite and numerous simple demos; and, visualisation support, both internal and using Visual Molecular Dynamics.\ud Additionally to these features, MercuryDPM has two major components that, to the best of our knowledge, cannot be found in other DPM packages. Firstly, it uses a novel advanced contact detection method that is able of dealing with multiple distinct granular components with sizes ranging over many orders of magnitude: the hierarchical grid. We explain how this algorithm works and demonstrate the speedup gained over the traditional linked cell approach. This algorithm has lower complexity for poly-dispersed ows which means for the first time large simulations with extremely wide size distributions are feasible.\ud Secondly, we present a novel way to extract continuum fields from discrete particle systems that is applicable to mixtures as well as boundaries and interfaces. The particle data is coarse grained in a way that is by construction compatible with the continuum equations of mass-, momentum-, and energy balance. Boundary interaction forces are taken into account in a self-consistent way and thus allow the construction of a continuous stress field even within one particle radius of the boundaries. The method does not require temporal averaging and thus can be used to investigate time-dependent flows as well as static and steady situations. This coarse-graining method is available from MercuryDPM either as a post-processing tool or it can be run in real time. In real-time mode, it not only reduces the data which has to be stored but also allows boundary conditions etc. to be updated depending on the current macroscopic state of the system, e.g. allowing the creation of a pressure-release wall.\ud Finally, we illustrate these tools and a selection of other features of MercuryDPM via various problems including size-driven segregation in chute flow, rotating drums, and screw-conveyer

Comprehensive ecosystem model-data synthesis using multiple data sets at two temperate forest free-air CO2 enrichment experiments: Model performance at ambient CO2 concentration

Free-air CO2 enrichment (FACE) experiments provide a remarkable wealth of data which can be used to evaluate and improve terrestrial ecosystem models (TEMs). In the FACE model-data synthesis project, 11 TEMs were applied to two decadelong FACE experiments in temperate forests of the southeastern U.S.—the evergreen Duke Forest and the deciduous Oak Ridge Forest. In this baseline paper, we demonstrate our approach to model-data synthesis by evaluating the models' ability to reproduce observed net primary productivity (NPP), transpiration, and leaf area index (LAI) in ambient CO2 treatments. Model outputs were compared against observations using a range of goodness-of-fit statistics. Many models simulated annual NPP and transpiration within observed uncertainty. We demonstrate, however, that high goodness-of-fit values do not necessarily indicate a successful model, because simulation accuracy may be achieved through compensating biases in component variables. For example, transpiration accuracy was sometimes achieved with compensating biases in leaf area index and transpiration per unit leaf area. Our approach to model-data synthesis therefore goes beyond goodness-of-fit to investigate the success of alternative representations of component processes. Here we demonstrate this approach by comparing competing model hypotheses determining peak LAI. Of three alternative hypotheses—(1) optimization to maximize carbon export, (2) increasing specific leaf area with canopy depth, and (3) the pipe model—the pipe model produced peak LAI closest to the observations. This example illustrates how data sets from intensive field experiments such as FACE can be used to reduce model uncertainty despite compensating biases by evaluating individual model assumptions

Genome sequence of an Australian kangaroo, Macropus eugenii, provides insight into the evolution of mammalian reproduction and development.

BACKGROUND: We present the genome sequence of the tammar wallaby, Macropus eugenii, which is a member of the kangaroo family and the first representative of the iconic hopping mammals that symbolize Australia to be sequenced. The tammar has many unusual biological characteristics, including the longest period of embryonic diapause of any mammal, extremely synchronized seasonal breeding and prolonged and sophisticated lactation within a well-defined pouch. Like other marsupials, it gives birth to highly altricial young, and has a small number of very large chromosomes, making it a valuable model for genomics, reproduction and development. RESULTS: The genome has been sequenced to 2 × coverage using Sanger sequencing, enhanced with additional next generation sequencing and the integration of extensive physical and linkage maps to build the genome assembly. We also sequenced the tammar transcriptome across many tissues and developmental time points. Our analyses of these data shed light on mammalian reproduction, development and genome evolution: there is innovation in reproductive and lactational genes, rapid evolution of germ cell genes, and incomplete, locus-specific X inactivation. We also observe novel retrotransposons and a highly rearranged major histocompatibility complex, with many class I genes located outside the complex. Novel microRNAs in the tammar HOX clusters uncover new potential mammalian HOX regulatory elements. CONCLUSIONS: Analyses of these resources enhance our understanding of marsupial gene evolution, identify marsupial-specific conserved non-coding elements and critical genes across a range of biological systems, including reproduction, development and immunity, and provide new insight into marsupial and mammalian biology and genome evolution