Numerical analysis of the ultra-wide tunability of nanofiber Bragg cavities

Nanofiber Bragg cavities (NFBCs) are solid-state microcavities fabricated in optical tapered fiber. They can be tuned to a resonance wavelength of more than 20 nm by applying mechanical tension. This property is important for matching the resonance wavelength of an NFBC with the emission wavelength of single-photon emitters. However, the mechanism of the ultra-wide tunability and the limitation of the tuning range have not yet been clarified. It is important to comprehensively analyze both the deformation of the cavity structure in an NFBC and the change in the optical properties due to the deformation. Here, we present an analysis of the ultra-wide tunability of an NFBC and the limitation of the tuning range using three dimensional (3D) finite element method (FEM) and 3D finite-difference time-domain (FDTD) optical simulations. When we applied a tensile force of 200 µN to the NFBC, a stress of 5.18 GPa was concentrated at the groove in the grating. The grating period was extended from 300 to 313.2 nm, while the diameter slightly shrank from 300 to 297.1 nm in the direction of the grooves and from 300 to 298 nm in the direction orthogonal to the grooves. This deformation shifted the resonance peak by 21.5 nm. These simulations indicated that both the elongation of the grating period and the small shrinkage of the diameter contributed to the ultra-wide tunability of the NFBC. We also calculated the dependence of the stress at the groove, the resonance wavelength, and the quality Q factor while changing the total elongation of the NFBC. The dependence of the stress on the elongation was 1.68 × 10-2 GPa/µm. The dependence of the resonance wavelength was 0.07 nm/µm, which almost agrees with the experimental result. When the NFBC, assumed to have the total length of 32 mm, was stretched by 380 µm with the tensile force of 250 µN, the Q factor for the polarization mode parallel to the groove changed from 535 to 443, which corresponded to a change in Purcell factor from 5.3 to 4.9. This slight reduction seems acceptable for the application as single photon sources. Furthermore, assuming a rupture strain of the nanofiber of 10 GPa, it was estimated that the resonance peak could be shifted by up to about 42 nm

Highly Efficient Coupling of Nanolight Emitters to a Ultra-wide Tunable Nanofibre Cavity

Solid-state microcavities combining ultra-small mode volume, wide-range resonance frequency tuning, as well as lossless coupling to a single mode fibre are integral tools for nanophotonics and quantum networks. We developed an integrated system providing all of these three indispensable properties. It consists of a nanofibre Bragg cavity (NFBC) with the mode volume of under 1 micro cubic meter and repeatable tuning capability over more than 20 nm at visible wavelengths. In order to demonstrate quantum light-matter interaction, we establish coupling of quantum dots to our tunable NFBC and achieve an emission enhancement by a factor of 2.7.Comment: 19 pages, 8 figures, including Supporting Information (5 pages, 4 figures), accepted for SCIENTIFC REPORT

Phase shift spectra of a fiber-microsphere system at the single photon level

We succeeded in measuring phase shift spectra of a microsphere cavity coupled with a tapered fiber using a weak coherent probe light at the single photon level. We utilized a tapered fiber with almost no depolarization and constructed a very stable phase shift measurement scheme based on polarization analysis using photon counting. Using a very weak probe light (\bar{n} = 0:41), we succeeded in observing the transition in the phase shift spectrum between undercoupling and overcoupling (at gap distances of 500 and 100 nm, respectively).We also used quantum state tomography to obtain a 'purity spectrum'. Even in the overcoupling regime, the average purity was 0.982 \pm 0.024 (minimum purity: 0.892), suggesting that the coherence of the fiber-microsphere system was well preserved. Based on these results, we believe this system is applicable to quantum phase gates using single light emitters such as diamond nitrogen vacancy centers.Comment: 8 pages, 3 figure

Affinity selection of DNA-binding protein complexes using mRNA display

Comprehensive analysis of DNA–protein interactions is important for mapping transcriptional regulatory networks on a genome-wide level. Here we present a new application of mRNA display for in vitro selection of DNA-binding protein heterodimeric complexes. Under improved selection conditions using a TPA-responsive element (TRE) as a bait DNA, known interactors c-fos and c-jun were simultaneously enriched about 100-fold from a model library (a 1:1:20 000 mixture of c-fos, c-jun and gst genes) after one round of selection. Furthermore, almost all kinds of the AP-1 family genes including c-jun, c-fos, junD, junB, atf2 and b-atf were successfully selected from an mRNA display library constructed from a mouse brain poly A(+) RNA after six rounds of selection. These results indicate that the mRNA display selection system can identify a variety of DNA-binding protein complexes in a single experiment. Since almost all transcription factors form heterooligomeric complexes to bind with their target DNA, this method should be most useful to search for DNA-binding transcription factor complexes

Fabrication of a nanofiber Bragg cavity with high quality factor using a focused helium ion beam

Nanofiber Bragg cavities (NFBCs) are solid-state microcavities fabricated in an optical tapered fiber. NFBCs are promising candidates as a platform for photonic quantum information devices due to their small mode volume, ultra-high coupling efficiencies, and ultra-wide tunability. However, the quality (Q) factor has been limited to be approximately 250, which may be due to limitations in the fabrication process. Here we report high Q NFBCs fabricated using a focused helium ion beam. Whenan NFBC with grooves of 640 periods is fabricated, the Q factor is over 4170, which is more than 16 times larger than that previously fabricated using a focused gallium ion beam

Non-contact detection of nanoscale structures using optical nanofiber

The detection of nanoscale structure/material property in a wide observation area is becoming very important in various application fields. However, it is difficult to utilize current optical technologies. Toward the realization of novel alternative, we have investigated a new optical sensing method using an optical nanofiber. When the nanofiber vertically approached a glass prism with a partial gold film, the material differences between the glass and the gold were detected as a transmittance difference of 6% with a vertical resolution of 9.6 nm. The nanofiber was also scanned 100 nm above an artificial small protruding object with a width of 240 nm. The object was detected with a horizontal resolution of 630 nm, which was less than the wavelength of the probe light