681 research outputs found
An Accelerated Development, Reduced Cost Approach to Lunar/Mars Exploration Using a Modular NTR-Based Space Transportation System
The results of integrated systems and mission studies are presented which quantify the benefits and rationale for developing a common, modular lunar/Mars space transportation system (STS) based on nuclear thermal rocket (NTR) technology. At present NASA's Exploration Program Office (ExPO) is considering chemical propulsion for an 'early return to the Moon' and NTR propulsion for the more demanding Mars missions to follow. The time and cost to develop these multiple systems are expected to be significant. The Nuclear Propulsion Office (NPO) has examined a variety of lunar and Mars missions and heavy lift launch vehicle (HLLV) options in an effort to determine a 'standardized' set of engine and stage components capable of satisfying a wide range of Space Exploration Initiative (SEI) missions. By using these components in a 'building block' fashion, a variety of single and multi-engine lunar and Mars vehicles can be configured. For NASA's 'First Lunar Outpost' (FLO) mission, an expendable NTR stage powered by two 50 klbf engines can deliver approximately 96 metric tons (t) to translunar injection (TLI) conditions for an initial mass in low earth orbit (IMLEO) of approximately 198 t compared to 250 t for a cryogenic chemical TLI stage. The NTR stage liquid hydrogen (LH2) tank has a 10 m diameter, 14.5 m length, and 66 t LH2 capacity. The NTR utilizes a UC-ZrC-graphite 'composite' fuel with a specific impulse (Isp) capability of approximately 900 s and an engine thrust-to-weight ratio of approximately 4.3. By extending the size and LH2 capacity of the lunar NTR stage to approximately 20 m and 96 t, respectively, a single launch Mars cargo vehicle capable of delivering approximately 50 t of surface payload is possible. Three 50 klbf NTR engines and the two standardized LH2 tank sizes developed for lunar and Mars cargo vehicle applications would be used to configure the Mars piloted vehicle for a mission as early as 2010. The paper describes the features of the 'common' NTR-based moon/Mars STS, examines performance sensitivities resulting from different 'mission mode' assumptions, and quantifies potential schedule and cost benefits resulting from this modular moon/Mars NTR vehicle approach
Structure of laponite-styrene precursor dispersions for production of advanced polymer-clay nanocomposites
One method for production of polymer-clay nanocomposites involves dispersal of surface-modified clay in a polymerisable monomeric solvent, followed by fast in situ polymerisation. In order to tailor the properties of the final material we aim to control the dispersion state of the clay in the precursor solvent. Here, we study dispersions of surface-modified Laponite, a synthetic clay, in styrene via large-scale Monte-Carlo simulations and experimentally, using small angle X-ray and static light scattering. By tuning the effective interaction between simulated laponite particles we are able to reproduce the experimental scattering intensity patterns for this system, with good accuracy over a wide range of length scales. However, this agreement could only be obtained by introducing a permanent electrostatic dipole moment into the plane of each Laponite particle, which we explain in terms of the distribution of substituted metal atoms within each Laponite particle. This suggests that Laponite dispersions, and perhaps other clay suspensions, should display some of the structural characteristics of dipolar fluids. Our simulated structures show aggregation regimes ranging from networks of long chains to dense clusters of Laponite particles, and we also obtain some intriguing ‘globular’ clusters, similar to capsids. We see no indication of any ‘house-of-cards’ structures. The simulation that most closely matches experimental results indicates that gel-like networks are obtained in Laponite dispersions, which however appear optically clear and non-sedimenting over extended periods of time. This suggests it could be difficult to obtain truly isotropic equilibrium dispersion as a starting point for synthesis of advanced polymer-clay nanocomposites with controlled structures
Crystallization diagram for antisolvent crystallization of lactose : using design of experiments to investigate continuous mixing- induced supersaturation
This study investigates the effects of key process parameters of continuous mixing-induced supersaturation on the antisolvent crystallization of lactose using D-optimal Design of Experiments (DoE). Aqueous solutions of lactose were mixed isothermally with antisolvents using a concentric capillary mixer. Process parameters investigated were the choice of antisolvent (acetone or isopropanol), concentration of lactose solution, total mass flow rate, and the ratio of mass flow rates of lactose solution and antisolvent. Using a D-optimal DoE a statistically significant sample set was chosen to explore and quantify the effects of these parameters. The responses measured were the solid state of the lactose crystallized, induction time, solid yield and particle size. Mixtures of α-lactose monohydrate and β-lactose were crystallized under most conditions with β-lactose content increasing with increasing amount of antisolvent. Pure α-lactose monohydrate was crystallized using acetone as the antisolvent, with mass flow ratios near 1:1, and near saturated solutions of lactose. A higher resolution DoE was adopted for acetone and was processed using multivariate methods to obtain a crystallization diagram of lactose. The model was used to create an optimized process to produce α-lactose monohydrate and predicted results agreed well with those obtained experimentally, validating the model. The solid state of lactose, induction time, and solid yield were accurately predicted
In-line monitoring of particle size and shape from image-based measurements
Within the pharmaceutical industry, particle size and shape distributions are crucial properties of crystalline particles produced in crystallisation processes. They determine the success or otherwise of processes such as granulation, suspension treatment and drying, all involved in the manufacture of the final pharmaceutical product. Some properties of the final pharmaceutical product such as dissolution behaviour are also influenced by the particle size and shape distribution of its ingredients. Therefore, crystallisation processes need to be controlled in order to produce particles with the desired attributes (size and shape). This in turn requires an accurate characterisation of the particle attributes during the crystallisation processes. Traditionally, particle size and shape are determined by means of off-line measurements. However, these techniques only provide information on the final state of the process and involve intermediate processing steps (e.g. sampling, dissolution, drying) that can alter the properties of the particles before the measurement. In recent years, a range of in-line techniques has been developed to obtain in-situ and real-time information on the state of the process in a non-disruptive manner
Affordable Development and Demonstration of a Small NTR Engine and Stage: How Small is Big Enough?
The Nuclear Thermal Rocket (NTR) derives its energy from fission of uranium-235 atoms contained within fuel elements that comprise the engine's reactor core. It generates high thrust and has a specific impulse potential of approximately 900 seconds - a 100% increase over today's best chemical rockets. The Nuclear Thermal Propulsion (NTP) project, funded by NASA's AES program, includes five key task activities: (1) Recapture, demonstration, and validation of heritage graphite composite (GC) fuel (selected as the "Lead Fuel" option); (2) Engine Conceptual Design; (3) Operating Requirements Definition; (4) Identification of Affordable Options for Ground Testing; and (5) Formulation of an Affordable Development Strategy. During FY'14, a preliminary DDT&E plan and schedule for NTP development was outlined by GRC, DOE and industry that involved significant system-level demonstration projects that included GTD tests at the NNSS, followed by a FTD mission. To reduce cost for the GTD tests and FTD mission, small NTR engines, in either the 7.5 or 16.5 klbf thrust class, were considered. Both engine options used GC fuel and a "common" fuel element (FE) design. The small approximately 7.5 klbf "criticality-limited" engine produces approximately 157 megawatts of thermal power (MWt) and its core is configured with parallel rows of hexagonal-shaped FEs and tie tubes (TTs) with a FE to TT ratio of approximately 1:1. The larger approximately 16.5 klbf Small Nuclear Rocket Engine (SNRE), developed by LANL at the end of the Rover program, produces approximately 367 MWt and has a FE to TT ratio of approximately 2:1. Although both engines use a common 35 inch (approximately 89 cm) long FE, the SNRE's larger diameter core contains approximately 300 more FEs needed to produce an additional 210 MWt of power. To reduce the cost of the FTD mission, a simple "1-burn" lunar flyby mission was considered to reduce the LH2 propellant loading, the stage size and complexity. Use of existing and flight proven liquid rocket and stage hardware (e.g., from the RL10B-2 engine and Delta Cryogenic Second Stage) was also maximized to further aid affordability. This paper examines the pros and cons of using these two small engine options, including their potential to support future human exploration missions to the Moon, near Earth asteroids, and Mars, and recommends a preferred size. It also provides a preliminary assessment of the key activities, development options, and schedule required to affordably build, ground test and fly a small NTR engine and stage within a 10-year timeframe
Effect of synthesis conditions on formation pathways of metal organic framework (MOF-5) Crystals
Metal Organic Frameworks (MOFs) represent a class of nanoporous crystalline materials with far reaching potential in gas storage, catalysis, and medical devices. We investigated the effects of synthesis process parameters on production of MOF-5 from terephthalic acid and zinc nitrate in diethylformamide. Under favorable synthesis conditions, we systematically mapped a solid formation diagram in terms of time and temperature for both stirred and unstirred conditions. The synthesis of MOF-5 has been previously reported as a straightforward reaction progressing from precursor compounds in solution directly to the final MOF-5 solid phase product. However, we show that the solid phase formation process is far more complex, invariably transferring through metastable intermediate crystalline phases before the final MOF-5 phase is reached, providing new insights into the formation pathways of MOFs. We also identify process parameters suitable for scale-up and continuous manufacturing of high purity MOF-5
Investigation of IR and Raman spectra of species present in formaldehyde-water-methanol systems
Formaldehyde forms a variety of hydrated and methoxylated species when reacted with water and methanol. Vibrational spectroscopy has been deployed for both remote and in situ sensing of formaldehyde species and it can be a useful tool for process development, monitoring and control at both laboratory and industrial scale, as well as for environmental, atmospheric and space monitoring. While IR and Raman spectroscopic studies of formaldehyde species in solid, liquid or gas phases have been reported, assignments of vibrational frequencies of relevant species in previous literature have been contradictory and incomplete. In this work we report IR and Raman spectra for formaldehyde-water-methanol solutions across a wide range of formaldehyde concentrations and solvent compositions. We present an analysis of vibrational spectra of formaldehyde-water-methanol systems using a combination of experimental measurements and gas phase quantum mechanical density functional theory simulations. For the first time, we explicitly consider spectra of oligomeric mixtures of formaldehyde species in relation to spectra of specific representative hydrated and methoxylated species and we resolve some previously reported contradictions in assignments of vibrational frequencies for formaldehyde systems
Recommended from our members
Fast Gate: Subnanosecond Gate Detectors for Laser Radiography
X-ray radiography is used as a principal diagnostic in a wide range of hydrodynamic tests relevant to the weapons program and also for basic materials and equation-of-state science studies. The quality of the x-ray radiograph can be significantly degraded by the scattering of x-rays within the object and by components of the test system itself. Elimination of these scattered x-rays from the recorded images can either substantially improve the image contrast and signal-to-noise or allow smaller, lower-cost x-ray sources to be used. The scattered x-rays could be minimized through the use of a much shorter-duration x-ray pulse and a fast, gated detector. The short duration x-ray pulse and the fast gated detector allow detection of only those x-rays which pass through the object being radiographed. X-rays which are the result of scattering have longer path lengths and take longer to reach the target. Most of these can be eliminated if the detector if gated off before they arrive at the detector. Until recently there were no sources of high energy x-rays (1-10 MeV) with short duration (sub 100 picosecond) pulses. Now the Petawatt Laser Facility (ref 1) at Lawrence Livermore National Laboratory has been able to produce 0.1 rads at 1 meter of MeV energy x-rays in 1-0 picoseconds. Efforts are underway to significantly increase this x-ray output. The combination of the existing short-duration, Petawatt-produced x-ray pulses and an x-ray detector with sub-100-ps gate times could eliminate most of the scattered x-rays from the radiograph image and allow highly improved radiography particularly for larger, high density test objects
Affordable Development and Demonstrationof a Small NTR Engine and Stage: A Preliminary NASA, DOE and Industry Assessment
Formulation of Affordable and Sustainable NTP Development Strategy is Underway Involving NASA, DOE and Industry. In FY11, Nuclear Thermal Propulsion (NTP) was identified as a key propulsion option under the Advanced In-Space Propulsion (AISP) component of NASA's Exploration Technology Development and Demonstration (ETDD) program
The Relationship Between Physical Activity and Cardiorespiratory Fitness Among People Living With Human Immunodeficiency Virus Throughout The Life Span
BACKGROUND: People living with human immunodeficiency virus (PLHIV) are at an increased risk for developing cardiovascular disease (CVD). Physical activity and cardiorespiratory fitness in PLHIV are poorly understood.
OBJECTIVE: The aims of this study were to describe physical activity and cardiorespiratory fitness by sex and age and to examine the association between physical activity and cardiorespiratory fitness in PLHIV, controlling for covariates.
METHODS: Seven hundred two PLHIV participated in a cross-sectional study and completed validated measures of self-reported physical activity (7-day Physical Activity Recall) and cardiorespiratory fitness (6-minute walk test). Participants were recruited from 7 diverse sites in the United States and Thailand, and data were analyzed using descriptive statistics and multiple regression to examine the relationship between physical activity and cardiorespiratory fitness.
RESULTS: On average, participants self-reported engaging in 115 minutes of, mostly light (75%), physical activity. Men reported twice the amount of physical activity as women (155 vs 73 minutes, P = .01). Participants\u27 ability to achieve their predicted 6-minute walk test distances was similar between men (68%) and women (69%) (P \u3e .01). For women, vigorous physical activity was associated with a 6.6% increase in cardiorespiratory fitness and being temporarily unemployed was associated with an 18% decline in cardiorespiratory fitness. Cardiorespiratory fitness increased with age (P \u3c .01).
CONCLUSIONS: Weekly physical activity of people living with human immunodeficiency virus averaged 85 minutes of mostly light activity, well below the recommended 150 minutes of moderate activity. Vigorous physical activity was associated with improved cardiorespiratory fitness in women, but not men. Although PLHIV would benefit from interventions to increase physical activity, our data suggest a need to develop sex-specific physical activity strategies
- …