1,908 research outputs found
Capillary focusing close to a topographic step: Shape and instability of confined liquid filaments
Step-emulsification is a microfluidic technique for droplet generation which
relies on the abrupt decrease of confinement of a liquid filament surrounded by
a continuous phase. A striking feature of this geometry is the transition
between two distinct droplet breakup regimes, the "step-regime" and
"jet-regime", at a critical capillary number. In the step-regime, small and
monodisperse droplets break off from the filament directly at a topographic
step, while in the jet-regime a jet protrudes into the larger channel region
and large plug-like droplets are produced. We characterize the breakup behavior
as a function of the filament geometry and the capillary number and present
experimental results on the shape and evolution of the filament for a wide
range of capillary numbers in the jet-regime. We compare the experimental
results with numerical simulations. Assumptions based on the smallness of the
depth of the microfluidic channel allow to reduce the governing equations to
the Hele-Shaw problem with surface tension. The full nonlinear equations are
then solved numerically using a volume-of-fluid based algorithm. The
computational framework also captures the transition between both regimes,
offering a deeper understanding of the underlying breakup mechanism
Remotely piloted LTA vehicle for surveillance
Various aspects of a remotely piloted mini-LTA vehicle for surveillance, monitoring and measurement for civilian and military applications are considered. Applications, operations and economics are discussed
Self-assembled granular walkers
Mechanisms of locomotion in microscopic systems are of great interest not
only for technological applications, but also for the sake of understanding,
and potentially harnessing, processes far from thermal equilibrium.
Down-scaling is a particular challenge, and has led to a number of interesting
concepts including thermal ratchet systems and asymmetric swimmers. Here we
present a system which is particularly intriguing, as it is self-assembling and
uses a robust mechanism which can be implemented in various settings. It
consists of small spheres of different size which adhere to each other, and are
subject to an oscillating (zero average) external force eld. An inherent
nonlinearity in the mutual force network leads to force rectication and hence
to locomotion. We present a model that accounts for the observed behaviour and
demonstrates the wide applicability and potential scalability of the concept.Comment: 17 pages, 4 figure
Thermal noise influences fluid flow in thin films during spinodal dewetting
Experiments on dewetting thin polymer films confirm the theoretical
prediction that thermal noise can strongly influence characteristic time-scales
of fluid flow and cause coarsening of typical length scales. Comparing the
experiments with deterministic simulations, we show that the Navier-Stokes
equation has to be extended by a conserved bulk noise term to accomplish the
observed spectrum of capillary waves. Due to thermal fluctuations the spectrum
changes from an exponential to a power law decay for large wavevectors. Also
the time evolution of the typical wavevector of unstable perturbations exhibits
noise induced coarsening that is absent in deterministic hydrodynamic flow.Comment: 4 pages, 3 figure
Shape of a liquid front upon dewetting
We examine the profile of a liquid front of a film that is dewetting a solid
substrate. Since volume is conserved, the material that once covered the
substrate is accumulated in a rim close to the three phase contact line.
Theoretically, such a profile of a Newtonian liquid resembles an exponentially
decaying harmonic oscillation that relaxes into the prepared film thickness.
For the first time, we were able to observe this behavior experimentally. A
non-Newtonian liquid - a polymer melt - however, behaves differently. Here,
viscoelastic properties come into play. We will demonstrate that by analyzing
the shape of the rim profile. On a nm scale, we gain access to the rheology of
a non-Newtonian liquid.Comment: 4 pages, 4 figure
Isolated development of inner (wall) caries like lesions in a bacterial-based in vitro model
The study conducted in a bacterial-based in vitro caries model aimed to determine whether typical inner secondary caries lesions can be detected at cavity walls of restorations with selected gap widths when the development of outer lesions is inhibited. Sixty bovine tooth specimens were randomly assigned to the following groups: test group 50 (TG50; gap, 50μm), test group 100 (TG100; gap, 100μm), test group 250 (TG250; gap, 250μm) and a control group (CG; gap, 250μm). The outer tooth surface of the test group specimens was covered with an acid-resistant varnish to inhibit the development of an outer caries lesion. After incubation in the caries model, the area of demineralization at the cavity wall was determined by confocal laser scanning microscopy. All test group specimens demonstrated only wall lesions. The CG specimens developed outer and wall lesions. The TG250 specimens showed significantly less wall lesion area compared to the CG (p < 0.05). In the test groups, a statistically significant increase (p < 0.05) in lesion area could be detected in enamel between TG50 and TG250 and in dentine between TG50 and TG100. In conclusion, the inner wall lesions of secondary caries can develop without the presence of outer lesions and therefore can be regarded as an entity on their own. The extent of independently developed wall lesions increased with gap width in the present settin
- …