Structure Oriented Compact Model for Advanced Trench IGBTs without Fitting Parameters for Extreme Condition: Part II

Compact model for expressing turn-off waveform for advanced trench gate IGBTs is proposed even under high current density condition. The model is analytically formulated only with device structure parameters so that no fitting parameters are required. The validity of the model is confirmed with TCAD simulation for 1.2 kV to 6.5 kV class IGBTs. The proposed turn-off model is sufficiently accurate to calculate trade-off curve between turn-off loss and saturation collector voltage under extremely high current conduction, so that the model can be used for system design with the advanced trench gate IGBTs.ESREF 2014, 25th EUROPEAN SYMPOSIUM ON RELIABILITY OF ELECTRON DEVICES,FAILURE PHYSICS AND ANALYSIS, Sep 29–Oct 3, 2014, Technische Universität Berli

New Power Module Integrating Output Current Measurement Function

This paper proposes a new power module concept that integrates output current measurement function to make inverters compact. The current measurement function is realized by tiny printed-circuit-board (PCB) Rogowski coils. The PCB Rogowski coil picks up a switching current flowing through an IGBT chip, and then a combination of a digital circuit based on a field-programmable-gate-array (FPGA) and an integrator circuit reproduces the output current of the inverter from the switching current. A major concern of the new power module is the effect of reverse recovery current of free-wheeling diodes because the reverse recovery current is superimposed on the switching current. This paper proposes a mitigating method of the reverse recovery current.2017 29th International Symposium on Power Semiconductor Devices and IC\u27s (ISPSD), May 28 2017-June 1 2017, Sapporo, Japa

DYNAMIC ANALYSIS OF THE EFFECT OF CENTRIFUGAL AND CORlOLlS FORCES IN SWINGING A BAT

This paper reports a dynamic analysis by computer simulation of bat swinging, taking into account inertial forces at the wrist joint, and which consist of centrifugal and Coriolis forces generated from a body turn and internal rotation of the upper limbs. The ideal bat swing generated by optimisation using a mathematical model is also described. Based on the dynamic analysis, it is shown that the inertial forces play an important role in the process of flexion and extension between a bat and the upper limbs during a bat swing, and that the effects of gravity on a bat is much smaller than those from inertial forces. It was also proven from the optimisation that an ideal bat swing, a swing using minimal torque at the wrist, exists

VLSI architectures for computing multiplications and inverses in GF(2-m)

Finite field arithmetic logic is central in the implementation of Reed-Solomon coders and in some cryptographic algorithms. There is a need for good multiplication and inversion algorithms that are easily realized on VLSI chips. Massey and Omura recently developed a new multiplication algorithm for Galois fields based on a normal basis representation. A pipeline structure is developed to realize the Massey-Omura multiplier in the finite field GF(2m). With the simple squaring property of the normal-basis representation used together with this multiplier, a pipeline architecture is also developed for computing inverse elements in GF(2m). The designs developed for the Massey-Omura multiplier and the computation of inverse elements are regular, simple, expandable and, therefore, naturally suitable for VLSI implementation

Electron beam induced radio emission from ultracool dwarfs

We present the numerical simulations for an electron-beam-driven and loss-cone-driven electron-cyclotron maser (ECM) with different plasma parameters and different magnetic field strengths for a relatively small region and short time-scale in an attempt to interpret the recent discovered intense radio emission from ultracool dwarfs. We find that a large amount of electromagnetic field energy can be effectively released from the beam-driven ECM, which rapidly heats the surrounding plasma. A rapidly developed high-energy tail of electrons in velocity space (resulting from the heating process of the ECM) may produce the radio continuum depending on the initial strength of the external magnetic field and the electron beam current. Both significant linear polarization and circular polarization of electromagnetic waves can be obtained from the simulations. The spectral energy distributions of the simulated radio waves show that harmonics may appear from 10 to 70$\nu_{\rm pe}$ ($\nu_{\rm pe}$ is the electron plasma frequency) in the non-relativistic case and from 10 to 600$\nu_{\rm pe}$ in the relativistic case, which makes it difficult to find the fundamental cyclotron frequency in the observed radio frequencies. A wide frequency band should therefore be covered by future radio observations.Comment: 10 pages, 19 figures, accepted for publication in the Astrophysical Journa

Temperature rise measurement for power-loss comparison of an aluminum electrolytic capacitor between sinusoidal and square-wave current injections

DC-link capacitors are a major factor of degrading reliability of power electric converters because they usually have a shorter lifetime and higher failure rate than those of semiconductor devices or magnetic devices. Characteristics of the capacitors are usually evaluated by a single sinusoidal current waveform. However, actual current flowing out of the converter into the capacitor is a modulated square current waveform. This paper provides experimental comparison of the power loss dissipated in an aluminum electrolytic capacitor between sinusoidal and square-wave current injections. Power loss is estimated by temperature rise of the capacitor. Experimental results confirm that power losses of the square-wave current injection were always lower than those of the sinusoidal current injection by 10–20%. Moreover, the power losses of the square-wave current injection can be estimated by a synthesis of fundamental and harmonic currents based on the Fourier series expansion, which brings a high accuracy less than 1% when more than fifth harmonic current is introduced. This comparison will be useful for estimating power loss and life time of electrolytic capacitors

Magnetic phase diagram of the frustrated S=1/2 chain magnet LiCu_2O_2

We present the results of the magnetization and dielectric constant measurements on untwinned single crystal samples of the frustrated S=1/2 chain cuprate LiCu_2O_2. Novel magnetic phase transitions were observed. A spin flop transition of the spiral spin plane was observed for the field orientations H||a,b. The second magnetic transition was observed at H~15 T for all three principal field directions. This high field magnetic phase is discussed as a collinear spin-modulated phase which is expected for an S=1/2 nearest-neighbor ferromagnetic and next-nearest-neighbor antiferromagnetic chain system

D * polarization vs. R D(∗) anomalies in the leptoquark models

Polarization measurements in B → D(*)Ƭν̅ are useful to check consistency in new physics explanations for the RD and RD* anomalies. In this paper, we investigate the D* and Ƭ polarizations and focus on the new physics contributions to the fraction of a longitudinal D* polarization (F D*/L ), which is recently measured by the Belle collaboration F D*/L = 0:60 ± 0:09, in model-independent manner and in each single leptoquark model (R2, S1 and U1) that can naturally explain the RD(*) anomalies. It is found that B(B+/c → Ƭ⁺ν) severely restricts deviation from the Standard Model (SM) prediction of F D*/L,SM = 0:46 ± 0:04 in the leptoquark models: [0:43; 0:44], [0:42; 0:48], and [0:43; 0:47] are predicted as a range of F D*/L for the R2, S1, and U1 leptoquark models, respectively, where the current data of RD(*) is satised at 1 σ level. It is also shown that the Ƭ polarization observables can much deviate from the SM predictions. The Belle II experiment, therefore, can check such correlations between RD(*) and the polarization observables, and discriminate among the leptoquark models