546 research outputs found

    Compressive failure of thick-section composite laminates with and without cutouts subjected to biaxial loading

    Get PDF
    The composites studied are fiber composite laminate plates made of carbon fibers and a thermoplastic matrix material. Tests and results are given for: the solution convergence for transverse shear in a clamped plate without cutout under compression; the effects of cutout and laminate thickness on maximum shear in buckling and postbuckling response of a clamped plate under biaxial compression; the effects of cutout and laminate thickness on maximum shear in buckling and postbuckling response of a clamped plate under biaxial compression; and the effects of laminate thickness and cutout of the lowest three eigenvalues of a clamped plate under biaxial compression. Additional test results are given

    Prevalence and characterization of Salmonella and Listeria monocytogenes in french raw pork meat at the distribution level

    Get PDF
    This study was undertaken in 2010 to estimate the occurrence of Listeria monocytogenes in raw pork meat at the distribution level in France

    A novel mode of chromosomal evolution peculiar to filamentous Ascomycete fungi

    Get PDF
    Background: Gene loss, inversions, translocations, and other chromosomal rearrangements vary among species, resulting in different rates of structural genome evolution. Major chromosomal rearrangements are rare in most eukaryotes, giving large regions with the same genes in the same order and orientation across species. These regions of macrosynteny have been very useful for locating homologous genes in different species and to guide the assembly of genome sequences. Previous analyses in the fungi have indicated that macrosynteny is rare; instead, comparisons across species show no synteny or only microsyntenic regions encompassing usually five or fewer genes. To test the hypothesis that chromosomal evolution is different in the fungi compared to other eukaryotes, synteny was compared between species of the major fungal taxa. Results: These analyses identified a novel form of evolution in which genes are conserved within homologous chromosomes, but with randomized orders and orientations. This mode of evolution is designated mesosynteny, to differentiate it from micro-and macrosynteny seen in other organisms. Mesosynteny is an alternative evolutionary pathway very different from macrosyntenic conservation. Surprisingly, mesosynteny was not found in all fungal groups. Instead, mesosynteny appears to be restricted to filamentous Ascomycetes and was most striking between species in the Dothideomycetes. Conclusions: The existence of mesosynteny between relatively distantly related Ascomycetes could be explained by a high frequency of chromosomal inversions, but translocations must be extremely rare. The mechanism for this phenomenon is not known, but presumably involves generation of frequent inversions during meiosis

    Shedding of Listeria monocytogenes by sows in French farrow-to-finish pig farms: prevalence, serotype and risk factors of contamination

    Get PDF
    This work was undertaken in 2008 to estimate the prevalence of L. monocytogenes in French farrow-to-finish pig farms at the breeding pig level and to determine risk factors of contamination of sows by L. monocytogenes. A total of 730 feces (10 per farm) were sampled from sows in 73 pig farms. 172 samples were also taken during the fattening stage, at 43 of the 73 farms (4 per farm). Detection of L. monocytogenes was carried out according to the ISO 11290-1/A1 method and isolates were serotyped. Generalized Estimating Equations were used in order to determine risk factors associated to contamination of sows by L. monocytogenes

    Coupled Electronic and Nuclear Motions during Azobenzene Photoisomerization Monitored by Ultrafast Electron Diffraction

    Get PDF
    Ultrafast electron diffraction is a powerful technique that can resolve molecular structures with femtosecond and angstrom resolutions. We demonstrate theoretically how it can be used to monitor conical intersection dynamics in molecules. Specific contributions to the signal are identified which vanish in the absence of vibronic coherence and offer a direct window into conical intersection paths. A special focus is on hybrid scattering from nuclei and electrons, a process that is unique to electron (rather than X-ray) diffraction and monitors the strongly coupled nuclear and electronic motions in the vicinity of conical intersections. An application is made to the cis to trans isomerization of azobenzene, computed with exact quantum dynamics wavepacket propagation in a reactive two-dimensional nuclear space

    Development of titanium dioxide nanowire incorporated poly(vinylidene fluoride–trifluoroethylene) scaffolds for bone tissue engineering applications

    Get PDF
    Critical size bone defects that do not heal spontaneously are among the major reasons for the disability in majority of people with locomotor disabilities. Tissue engineering has become a promising approach for repairing such large tissue injuries including critical size bone defects. Three-dimension (3D) porous scaffolds based on piezoelectric polymers like poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) have received a lot of attention in bone tissue engineering due to their favorable osteogenic properties. Owing to the favourable redox properties, titanium dioxide (TiO2) nanostructures have gained a great deal of attention in bone tissue engineering. In this paper, tissue engineering scaffolds based on P(VDF-TrFE) loaded with TiO2 nanowires (TNW) were developed and evaluated for bone tissue engineering. Wet-chemical method was used for the synthesis of TNW. Obtained TNW were thoroughly characterized for the physicochemical and morphological properties using techniques such as X-Ray diffraction (XRD) analysis and transmission electron microscopy (TEM). Electrospinning was used to produce TNW incorporated P(VDF-TrFE) scaffolds. Developed scaffolds were characterized by state of art techniques such as Scanning Electron Microscopy (SEM), XRD and Differential scanning calorimetry (DSC) analyses. TEM analysis revealed that the obtained TiO2 nanostructures possess nanofibrous morphology with an average diameter of 26 ± 4 nm. Results of characterization of nanocomposite scaffolds confirmed the effective loading of TNW in P(VDF-TrFE) matrix. Fabricated P(VDF-TrFE)/TNW scaffolds possessed good mechanical strength and cytocompatibility. Osteoblast like cells showed higher adhesion and proliferation on the nanocomposite scaffolds. This investigation revealed that the developed P(VDF-TrFE) scaffolds containing TNW can be used as potential scaffolds for bone tissue engineering applications.This work was supported by the French PIA project « Lorraine university d’excellence » reference ANR-15-IDEX-04-LUE. This article was also made possible by the NPRP9-144-3-021 grant funded by Qatar National Research Fund (a part of Qatar Foundation). The statements made here are the sole responsibility of the authors. Open Access funding was provided by the Qatar National Library

    Synthesis of Single Phase Hg-1223 High Tc Superconducting Films With Multistep Electrolytic Process

    Full text link
    We report the multistep electrolytic process for the synthesis of high Tc single phase HgBa2Ca2Cu3O8+ (Hg-1223) superconducting films. The process includes : i) deposition of BaCaCu precursor alloy, ii) oxidation of BaCaCu films, iii) electrolytic intercalation of Hg in precursor BaCaCuO films and iv) electrochemical oxidation and annealing of Hg-intercalated BaCaCuO films to convert into Hg1Ba2Ca2Cu3O8+ (Hg-1223). Films were characterized by thermo-gravimetric analysis (TGA) and differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The electrolytic intercalation of Hg in BaCaCuO precursor is proved to be a novel alternative to high temperature-high pressure mercuration process. The films are single phase Hg-1223 with Tc = 121.5 K and Jc = 4.3 x 104 A/cm2.Comment: 17 Pages, 10 Figures. Submitted to Superconductor Science and Technolog

    Ge and Si Isotope Behavior During Intense Tropical Weathering and Ecosystem Cycling

    Get PDF
    Chemical weathering of volcanic rocks in warm and humid climates contributes disproportionately to global solute fluxes. Geochemical signatures of solutes and solids formed during this process can help quantify and reconstruct weathering intensity in the past. Here, we measured silicon (Si) and germanium (Ge) isotope ratios of the soils, clays, and fluids from a tropical lowland rainforest in Costa Rica. The bulk topsoil is intensely weathered and isotopically light (mean ± 1σ: δ³⁰Si = −2.1 ± 0.3‰, δ⁷⁴Ge = −0.13 ± 0.12‰) compared to the parent rock (δ³⁰Si = −0.11 ± 0.05‰, δ⁷⁴Ge = 0.59 ± 0.07‰). Neoforming clays have even lower values (δ³⁰Si = −2.5 ± 0.2‰, δ⁷⁴Ge = −0.16 ± 0.09‰), demonstrating a whole‐system isotopic shift in extremely weathered systems. The lowland streams represent mixing of dilute local fluids (δ³⁰Si = 0.2 − 0.6‰, δ⁷⁴Ge = 2.2 − 2.6‰) with solute‐rich interbasin groundwater (δ³⁰Si = 1.0 ± 0.2‰, δ⁷⁴Ge = 4.0‰). Using a Ge‐Si isotope mass balance model, we calculate that 91 ± 9% of Ge released via weathering of lowland soils is sequestered by neoforming clays, 9 ± 9% by vegetation, and only 0.2 ± 0.2% remains dissolved. Vegetation plays an important role in the Si cycle, directly sequestering 39 ± 14% of released Si and enhancing clay neoformation in surface soils via the addition of amorphous phytolith silica. Globally, volcanic soil δ⁷⁴Ge closely tracks the depletion of Ge by chemical weathering (τGe), whereas δ³⁰Si and Ge/Si both reflect the loss of Si (τ_{Si}). Because of the different chemical mobilities of Ge and Si, a δ⁷⁴Ge‐δ³⁰Si multiproxy system is sensitive to a wider range of weathering intensities than each isotopic system in isolation
    corecore