30 research outputs found
Monitoring carbon in electron and ion beam deposition within FIB-SEM
It is well known that carbon present in scanning electron microscopes (SEM), Focused ion beam (FIB) systems and FIB-SEMs, causes imaging artefacts and influences the quality of TEM lamellae or structures fabricated in FIB-SEMs. The severity of such effects depends not only on the quantity of carbon present but also on its bonding state. Despite this, the presence of carbon and its bonding state is not regularly monitored in FIB-SEMs. Here we demonstrated that Secondary Electron Hyperspectral Imaging (SEHI) can be implemented in different FIB-SEMs (ThermoFisher Helios G4-CXe PFIB and Helios Nanolab G3 UC) and used to observe carbon built up/removal and bonding changes resulting from electron/ion beam exposure. As well as the ability to monitor, this study also showed the capability of Plasma FIB Xe exposure to remove carbon contamination from the surface of a Ti6246 alloy without the requirement of chemical surface treatments
Recommended from our members
Searching for order in atmospheric pressure plasma jets
The self-organized discharge behaviour occurring in a non-thermal radio-frequency plasma jet in rare gases at atmospheric pressure was investigated. The frequency of the azimuthal rotation of filaments in the active plasma volume and their inclination were measured along with the gas temperature under varying discharge conditions. The gas flow and heating were described theoretically by a three-dimensional hydrodynamic model. The rotation frequencies obtained by both methods qualitatively agree. The results demonstrate that the plasma filaments forming an inclination angle α with the axial gas velocity uz are forced to a transversal movement with the velocity uφ=tan(α)*uz, which is oriented in the inclination direction. Variations of in the model reveal that the observed dynamics minimizes the energy loss due to convective heat transfer by the gas flow. The control of the self-organization regime motivates the application of the plasma jet for precise and reproducible material processing
Surface modification of the laser sintering standard powder polyamide 12 by plasma treatments
Polyamide 12 (PA12) powder was exposed for up to 3 h to low pressure air plasma treatment (LP-PT) and several minutes by two different atmospheric pressure plasma jets (APPJ) i.e., kINPen (K-APPJ) and Hairline (H-APPJ). The chemical and physical changes resulting from LP-PT were observed by a combination of Scanning Electron Microscopy (SEM), Hot Stage Microscopy (HSM) and Fourier transform infrared spectroscopy (FTIR), which demonstrated significant changes between the plasma treated and untreated PA12 powders. PA12 exposed to LP-PT showed an increase in wettability, was relatively porous, and possessed a higher density, which resulted from the surface functionalization and materials removal during the plasma exposure. However, it showed poor melt behavior under heating conditions typical for Laser Sintering. In contrast, brief PJ treatments demonstrated similar changes in porosity, but crucially, retained the favorable melt characteristics of PA12 powder
Recommended from our members
Surface modification of the laser sintering standard powder polyamide 12 by plasma treatments
Polyamide 12 (PA12) powder was exposed for up to 3 h to low pressure air plasma treatment (LP-PT) and several minutes by two different atmospheric pressure plasma jets (APPJ) i.e., kINPen (K-APPJ) and Hairline (H-APPJ). The chemical and physical changes resulting from LP-PT were observed by a combination of Scanning Electron Microscopy (SEM), Hot Stage Microscopy (HSM) and Fourier transform infrared spectroscopy (FTIR), which demonstrated significant changes between the plasma treated and untreated PA12 powders. PA12 exposed to LP-PT showed an increase in wettability, was relatively porous, and possessed a higher density, which resulted from the surface functionalization and materials removal during the plasma exposure. However, it showed poor melt behavior under heating conditions typical for Laser Sintering. In contrast, brief PJ treatments demonstrated similar changes in porosity, but crucially, retained the favorable melt characteristics of PA12 powder
CYP1A2 and coffee intake and the modifying effect of sex, age, and smoking
Background: The enzyme CYP1A2 (cytochrome 1A2) is involved in the metabolism of certain drugs and caffeine, and its activity can be influenced by factors such as sex, age, and smoking. The single nucleotide polymorphism (SNP) rs762551A>C, which has also been studied for its modifying effect on cardiovascular disease, has been reported to alter enzyme activity. Objective: The objective was to study the effect of CYP1A2, sex, age, and smoking on coffee intake. Design: Within the Rotterdam Study, a population-based cohort, all coffee drinkers for whom genome-wide association data were available were selected. Because SNP rs762551 was not on the Illumina 550 platform, SNP rs2472299 was used as a proxy, with the A allele of rs762551 linked to the G allele of rs2472299. Linear regression analyses were used to determine the effect and interaction of rs2472299, sex, age, and smoking on coffee intake. Adjusted geometric means of coffee intake were calculated per genotype for the different smoking and sex strata by using multivariable general linear models. A combined analysis, with the use of a "risk score,"was performed to determine the contribution of each separate factor. Results: rs2472299G>A, female sex, and nonsmoking were significantly inversely related to coffee intake. Coffee intake was lowest in nonsmoking women homozygous for rs2472299G>A (3.49 cups/d; ∼436 mL). All factors contributed almost linearly to the intake of coffee, with the highest coffee intake in smoking men without the A allele (5.32 cups/d; ∼665 mL). Conclusion: rs2472299G>A, linked to rs762551A>C, sex, age, and smoking significantly contribute to coffee intake
Recommended from our members
Making Sense of Complex Carbon and Metal/Carbon Systems by Secondary Electron Hyperspectral Imaging
Carbon and carbon/metal systems with a multitude of functionalities are ubiquitous in new technologies but understanding on the nanoscale remains elusive due to their affinity for interaction with their environment and limitations in available characterization techniques. This paper introduces a spectroscopic technique and demonstrates its capacity to reveal chemical variations of carbon. The effectiveness of this approach is validated experimentally through spatially averaging spectroscopic techniques and using Monte Carlo modeling. Characteristic spectra shapes and peak positions for varying contributions of sp2-like or sp3-like bond types and amorphous hydrogenated carbon are reported under circumstances which might be observed on highly oriented pyrolytic graphite (HOPG) surfaces as a result of air or electron beam exposure. The spectral features identified above are then used to identify the different forms of carbon present within the metallic films deposited from reactive organometallic inks. While spectra for metals is obtained in dedicated surface science instrumentation, the complex relations between carbon and metal species is only revealed by secondary electron (SE) spectroscopy and SE hyperspectral imaging obtained in a state-of-the-art scanning electron microscope (SEM). This work reveals the inhomogeneous incorporation of carbon on the nanoscale but also uncovers a link between local orientation of metallic components and carbon form
Making Sense of Complex Carbon and Metal/Carbon Systems by Secondary Electron Hyperspectral Imaging
Carbon and carbon/metal systems with a multitude of functionalities are
ubiquitous in new technologies but understanding on the nanoscale remains
elusive due to their affinity for interaction with their environment and
limitations in available characterization techniques. This paper introduces
a spectroscopic technique and demonstrates its capacity to reveal chemical
variations of carbon. The effectiveness of this approach is validated
experimentally through spatially averaging spectroscopic techniques and
using Monte Carlo modeling. Characteristic spectra shapes and peak
positions for varying contributions of sp2-like or sp3-like bond types and
amorphous hydrogenated carbon are reported under circumstances which
might be observed on highly oriented pyrolytic graphite (HOPG) surfaces as a
result of air or electron beam exposure. The spectral features identified above
are then used to identify the different forms of carbon present within the
metallic films deposited from reactive organometallic inks. While spectra for
metals is obtained in dedicated surface science instrumentation, the complex
relations between carbon and metal species is only revealed by secondary
electron (SE) spectroscopy and SE hyperspectral imaging obtained in a
state-of-the-art scanning electron microscope (SEM). This work reveals the
inhomogeneous incorporation of carbon on the nanoscale but also uncovers
a link between local orientation of metallic components and carbon form
Arginine–glycine–aspartic acid functional branched semi-interpenetrating hydrogels
For the first time a series of functional hydrogels based on semi-interpenetrating networks with both
branched and crosslinked polymer components have been prepared and we show the successful use of
these materials as substrates for cell culture. The materials consist of highly branched poly(N-isopropyl
acrylamide)s with peptide functionalised end groups in a continuous phase of crosslinked poly(vinyl
pyrrolidone). Functionalisation of the end groups of the branched polymer component with the GRGDS
peptide produces a hydrogel that supports cell adhesion and proliferation. The materials provide a new
synthetic functional biomaterial that has many of the features of extracellular matrix, and as such can be
used to support tissue regeneration and cell culture. This class of high water content hydrogel material
has important advantages over other functional hydrogels in its synthesis and does not require postprocessing
modifications nor are functional-monomers, which change the polymerisation process,
required. Thus, the systems are amenable to large scale and bespoke manufacturing using conventional
moulding or additive manufacturing techniques. Processing using additive manufacturing is exemplified
by producing tubes using microstereolithography
The relationship between appetite and food preferences in British and Australian children
Background: Appetitive traits and food preferences are key determinants of children’s eating patterns but it is unclear how these behaviours relate to one another. This study explores relationships between appetitive traits and preferences for fruits and vegetables, and energy dense, nutrient poor (noncore) foods in two distinct samples of Australian and British preschool children. Methods: This study reports secondary analyses of data from families participating in the British GEMINI cohort study (n = 1044) and the control arm of the Australian NOURISH RCT (n = 167). Food preferences were assessed by parent-completed questionnaire when children were aged 3–4 years and grouped into three categories; vegetables, fruits and noncore foods. Appetitive traits; enjoyment of food, food responsiveness, satiety responsiveness, slowness in eating, and food fussiness were measured using the Children’s Eating Behaviour Questionnaire when children were 16 months (GEMINI) or 3–4 years (NOURISH). Relationships between appetitive traits and food preferences were explored using adjusted linear regression analyses that controlled for demographic and anthropometric covariates. Results: Vegetable liking was positively associated with enjoyment of food (GEMINI; β = 0.20 ± 0.03, p < 0.001, NOURISH; β = 0.43 ± 0.07, p < 0.001) and negatively related to satiety responsiveness (GEMINI; β = -0.19 ± 0.03, p < 0.001, NOURISH; β = -0.34 ± 0.08, p < 0.001), slowness in eating (GEMINI; β = -0.10 ± 0.03, p = 0.002, NOURISH; β = -0.30 ± 0.08, p < 0.001) and food fussiness (GEMINI; β = −0.30 ± 0.03, p < 0.001, NOURISH; β = -0.60 ± 0.06, p < 0.001). Fruit liking was positively associated with enjoyment of food (GEMINI; β = 0.18 ± 0.03, p < 0.001, NOURISH; β = 0.36 ± 0.08, p < 0.001), and negatively associated with satiety responsiveness (GEMINI; β = −0.13 ± 0.03, p < 0.001, NOURISH; β = −0.24 ± 0.08, p = 0.003), food fussiness (GEMINI; β = -0.26 ± 0.03, p < 0.001, NOURISH; β = −0.51 ± 0.07, p < 0.001) and slowness in eating (GEMINI only; β = -0.09 ± 0.03, p = 0.005). Food responsiveness was unrelated to liking for fruits or vegetables in either sample but was positively associated with noncore food preference (GEMINI; β = 0.10 ± 0.03, p = 0.001, NOURISH; β = 0.21 ± 0.08, p = 0.010). Conclusion: Appetitive traits linked with lower obesity risk were related to lower liking for fruits and vegetables, while food responsiveness, a trait linked with greater risk of overweight, was uniquely associated with higher liking for noncore foods
Indium-free multilayer semi-transparent electrodes for polymer solar cells
We have explored the fabrication of indium-free electrodes for use in a PCDTBT:PC70BM organic photovoltaic (OPV) device, and compare different multilayer electrodes as the device anode. Two oxide/metal/oxide structures were investigated that consisted of MoO3/Ag/MoO3 (MAM) and TeO2/Ag/MoO3 (TAM) multilayers. Using scanning electron microscopy measurements, we find that the electrode utilising a TeO2 seed layer encouraged the growth of a more continuous silver layer at low film thickness relative to an MoO3 seed layer, and thus combines enhanced optical transmission (by around 7%) with low sheet resistance (14 Ω/□). This enhanced optical transmittance results in an increased short-circuit current in photovoltaic cells, with TAM-based devices having a power conversion efficiency around 6% higher than those fabricated using a comparable MAM electrode