Rapid evolution of leaf physiology in an introduced beach daisy

Photosynthesis is a key biological process. However, we know little about whether plants change their photosynthetic strategy when introduced to a new range. We located the most likely source population for the South African beach daisy Arctotheca populifolia introduced to Australia in the 1930s, and ran a common-garden experiment measuring 10 physiological and morphological leaf traits associated with photosynthesis. Based on predictions from theory, and higher rainfall in the introduced range, we hypothesized that introduced plants would have a (i) higher photosynthetic rate, (ii) lower water-use efficiency (WUE) and (iii) higher nitrogen-use efficiency. However, we found that introduced A. populifolia had a lower photosynthetic rate, higher WUE and lower nitrogen-use efficiency than did plants from Arniston, South Africa. Subsequent site visits suggested that plants in Arniston may be able to access moisture on a rocky shelf, while introduced plants grow on sandy beaches where water can quickly dissipate. Our unexpected findings highlight that: (1) it is important to compare introduced species to their source population for an accurate assessment of evolutionary change; (2) rainfall is not always a suitable proxy for water availability and (3) introduced species often undergo evolutionary changes, but without detailed ecological information we may not be able to accurately predict the direction of these changes

Ligand K-edge X-ray absorption spectroscopy and DFT calculations on [Fe3S4]0,+ clusters: delocalization, redox, and effect of the protein environment

Ligand K-edge XAS of an [Fe3S4]0 model complex is reported. The pre-edge can be resolved into contributions from the í2Ssulfide, í3Ssulfide, and Sthiolate ligands. The average ligand-metal bond covalencies obtained from these pre-edges are further distributed between Fe3+ and Fe2.5+ components using DFT calculations. The bridging ligand covalency in the [Fe2S2]+ subsite of the [Fe3S4]0 cluster is found to be significantly lower than its value in a reduced [Fe2S2] cluster (38% vs 61%, respectively). This lowered bridging ligand covalency reduces the superexchange coupling parameter J relative to its value in a reduced [Fe2S2]+ site (-146 cm-1 vs -360 cm-1, respectively). This decrease in J, along with estimates of the double exchange parameter B and vibronic coupling parameter ì2/k-, leads to an S ) 2 delocalized ground state in the [Fe3S4]0 cluster. The S K-edge XAS of the protein ferredoxin II (Fd II) from the D. gigas active site shows a decrease in covalency compared to the model complex, in the same oxidation state, which correlates with the number of H-bonding interactions to specific sulfur ligands present in the active site. The changes in ligand-metal bond covalencies upon redox compared with DFT calculations indicate that the redox reaction involves a two-electron change (one-electron ionization plus a spin change of a second electron) with significant electronic relaxation. The presence of the redox inactive Fe3+ center is found to decrease the barrier of the redox process in the [Fe3S4] cluster due to its strong antiferromagnetic coupling with the redox active Fe2S2 subsite

Fr-TM-align: a new protein structural alignment method based on fragment alignments and the TM-score

©2008 Pandit and Skolnick; licensee BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This article is available from: http://www.biomedcentral.com/1471-2105/9/531doi:10.1186/1471-2105-9-531Background: Protein tertiary structure comparisons are employed in various fields of contemporary structural biology. Most structure comparison methods involve generation of an initial seed alignment, which is extended and/or refined to provide the best structural superposition between a pair of protein structures as assessed by a structure comparison metric. One such metric, the TM-score, was recently introduced to provide a combined structure quality measure of the coordinate root mean square deviation between a pair of structures and coverage. Using the TM-score, the TM-align structure alignment algorithm was developed that was often found to have better accuracy and coverage than the most commonly used structural alignment programs; however, there were a number of situations when this was not true. Results: To further improve structure alignment quality, the Fr-TM-align algorithm has been developed where aligned fragment pairs are used to generate the initial seed alignments that are then refined using dynamic programming to maximize the TM-score. For the assessment of the structural alignment quality from Fr-TM-align in comparison to other programs such as CE and TMalign, we examined various alignment quality assessment scores such as PSI and TM-score. The assessment showed that the structural alignment quality from Fr-TM-align is better in comparison to both CE and TM-align. On average, the structural alignments generated using Fr-TM-align have a higher TM-score (~9%) and coverage (~7%) in comparison to those generated by TM-align. Fr- TM-align uses an exhaustive procedure to generate initial seed alignments. Hence, the algorithm is computationally more expensive than TM-align. Conclusion: Fr-TM-align, a new algorithm that employs fragment alignment and assembly provides better structural alignments in comparison to TM-align. The source code and executables of Fr- TM-align are freely downloadable at: http://cssb.biology.gatech.edu/skolnick/files/FrTMalign/

A demonstration of an affinity between pyrite and organic matter in a hydrothermal setting

One of the key-principles of the iron-sulphur world theory is to bring organic molecules close enough to interact with each other, using the surface of pyrite as a substrate in a hydrothermal setting. The present paper explores the relationship of pyrite and organic matter in a hydrothermal setting from the geological record; in hydrothermal calcite veins from Carboniferous limestones in central Ireland. Here, the organic matter is accumulated as coatings around, and through, pyrite grains. Most of the pyrite grains are euhedral-subhedral crystals, ranging in size from ca 0.1-0.5 mm in diameter, and they are scattered throughout the matrix of the vein calcite. The organic matter was deposited from a hydrothermal fluid at a temperature of at least 200°C, and gives a Raman signature of disordered carbon. This study points to an example from a hydrothermal setting in the geological record, demonstrating that pyrite can have a high potential for the concentration and accumulation of organic materials

Theoretical study of the insulating oxides and nitrides: SiO2, GeO2, Al2O3, Si3N4, and Ge3N4

An extensive theoretical study is performed for wide bandgap crystalline oxides and nitrides, namely, SiO_{2}, GeO_{2}, Al_{2}O_{3}, Si_{3}N_{4}, and Ge_{3}N_{4}. Their important polymorphs are considered which are for SiO_{2}: $\alpha$-quartz, $\alpha$- and $\beta$-cristobalite and stishovite, for GeO_{2}: $\alpha$-quartz, and rutile, for Al_{2}O_{3}: $\alpha$-phase, for Si_{3}N_{4} and Ge_{3}N_{4}: $\alpha$- and $\beta$-phases. This work constitutes a comprehensive account of both electronic structure and the elastic properties of these important insulating oxides and nitrides obtained with high accuracy based on density functional theory within the local density approximation. Two different norm-conserving \textit{ab initio} pseudopotentials have been tested which agree in all respects with the only exception arising for the elastic properties of rutile GeO_{2}. The agreement with experimental values, when available, are seen to be highly satisfactory. The uniformity and the well convergence of this approach enables an unbiased assessment of important physical parameters within each material and among different insulating oxide and nitrides. The computed static electric susceptibilities are observed to display a strong correlation with their mass densities. There is a marked discrepancy between the considered oxides and nitrides with the latter having sudden increase of density of states away from the respective band edges. This is expected to give rise to excessive carrier scattering which can practically preclude bulk impact ionization process in Si_{3}N_{4} and Ge_{3}N_{4}.Comment: Published version, 10 pages, 8 figure

Linear-time protein 3-D structure searching with insertions and deletions

<p>Abstract</p> <p>Background</p> <p>Two biomolecular 3-D structures are said to be similar if the RMSD (root mean square deviation) between the two molecules' sequences of 3-D coordinates is less than or equal to some given constant bound. Tools for searching for similar structures in biomolecular 3-D structure databases are becoming increasingly important in the structural biology of the post-genomic era.</p> <p>Results</p> <p>We consider an important, fundamental problem of reporting all substructures in a 3-D structure database of chain molecules (such as proteins) which are similar to a given query 3-D structure, with consideration of indels (<it>i.e.</it>, insertions and deletions). This problem has been believed to be very difficult but its exact computational complexity has not been known. In this paper, we first prove that the problem in unbounded dimensions is NP-hard. We then propose a new algorithm that dramatically improves the average-case time complexity of the problem in 3-D in case the number of indels <it>k </it>is bounded by a constant. Our algorithm solves the above problem for a query of size <it>m </it>and a database of size <it>N </it>in average-case <it>O</it>(<it>N</it>) time, whereas the time complexity of the previously best algorithm was <it>O</it>(<it>Nm</it>^<it>k</it>+1).</p> <p>Conclusions</p> <p>Our results show that although the problem of searching for similar structures in a database based on the RMSD measure with indels is NP-hard in the case of unbounded dimensions, it can be solved in 3-D by a simple average-case linear time algorithm when the number of indels is bounded by a constant.</p

Can type of school be used as an alternative indicator of socioeconomic status in dental caries studies? A cross-sectional study

<p>Abstract</p> <p>Background</p> <p>Despite the importance of collecting individual data of socioeconomic status (SES) in epidemiological oral health surveys with children, this procedure relies on the parents as respondents. Therefore, type of school (public or private schools) could be used as an alternative indicator of SES, instead of collecting data individually. The aim of this study was to evaluate the use of the variable type of school as an indicator of socioeconomic status as a substitute of individual data in an epidemiological survey about dental caries in Brazilian preschool children.</p> <p>Methods</p> <p>This study followed a cross-sectional design, with a random sample of 411 preschool children aged 1 to 5 years, representative of Catalão, Brazil. A calibrated examiner evaluated the prevalence of dental caries and parents or guardians provided information about several individual socioeconomic indicators by means of a semi-structured questionnaire. A multilevel approach was used to investigate the association among individual socioeconomic variables, as well as the type of school, and the outcome.</p> <p>Results</p> <p>When all significant variables in the univariate analysis were used in the multiple model, only mother's schooling and household income (individual socioeconomic variables) presented significant associations with presence of dental caries, and the type of school was not significantly associated. However, when the type of school was used alone, children of public school presented significantly higher prevalence of dental caries than those enrolled in private schools.</p> <p>Conclusions</p> <p>The type of school used as an alternative indicator for socioeconomic status is a feasible predictor for caries experience in epidemiological dental caries studies involving preschool children in Brazilian context.</p

Effects of rose hip intake on risk markers of type 2 diabetes and cardiovascular disease: a randomized, double-blind, cross-over investigation in obese persons

BACKGROUND/OBJECTIVES:In studies performed in mice, rose hip powder has been shown to both prevent and reverse high-fat diet-induced obesity and glucose intolerance as well as reduce plasma levels of cholesterol. The aim of this study was to investigate whether daily intake of rose hip powder over 6 weeks exerts beneficial metabolic effects in obese individuals.SUBJECTS/METHODS:A total of 31 obese individuals with normal or impaired glucose tolerance were enrolled in a randomized, double-blind, cross-over study in which metabolic effects of daily intake of a rose hip powder drink over 6 weeks was compared with a control drink. Body weight, glucose tolerance, blood pressure, blood lipids and markers of inflammation were assessed in the subjects.RESULTS:In comparison with the control drink, 6 weeks of daily consumption of the rose hip drink resulted in a significant reduction of systolic blood pressure (-3.4%; P=0.021), total plasma cholesterol (-4.9%; P=0.0018), low-density lipoprotein (LDL) cholesterol (-6.0%; P=0.012) and LDL/HDL ratio (-6.5%; P=0.041). The Reynolds risk assessment score for cardiovascular disease was decreased in the rose hip group compared with the control group (-17%; P=0.007). Body weight, diastolic blood pressure, glucose tolerance, and plasma levels of high-density lipoprotein (HDL) cholesterol, triglycerides, incretins and markers of inflammation did not differ between the two groups.CONCLUSIONS:Daily consumption of 40 g of rose hip powder for 6 weeks can significantly reduce cardiovascular risk in obese people through lowering of systolic blood pressure and plasma cholesterol levels.European Journal of Clinical Nutrition advance online publication, 14 December 2011; doi:10.1038/ejcn.2011.203

TOPS++FATCAT: Fast flexible structural alignment using constraints derived from TOPS+ Strings Model

<p>Abstract</p> <p>Background</p> <p>Protein structure analysis and comparison are major challenges in structural bioinformatics. Despite the existence of many tools and algorithms, very few of them have managed to capture the intuitive understanding of protein structures developed in structural biology, especially in the context of rapid database searches. Such intuitions could help speed up similarity searches and make it easier to understand the results of such analyses.</p> <p>Results</p> <p>We developed a TOPS++FATCAT algorithm that uses an intuitive description of the proteins' structures as captured in the popular TOPS diagrams to limit the search space of the aligned fragment pairs (AFPs) in the flexible alignment of protein structures performed by the FATCAT algorithm. The TOPS++FATCAT algorithm is faster than FATCAT by more than an order of magnitude with a minimal cost in classification and alignment accuracy. For beta-rich proteins its accuracy is better than FATCAT, because the TOPS+ strings models contains important information of the parallel and anti-parallel hydrogen-bond patterns between the beta-strand SSEs (Secondary Structural Elements). We show that the TOPS++FATCAT errors, rare as they are, can be clearly linked to oversimplifications of the TOPS diagrams and can be corrected by the development of more precise secondary structure element definitions.</p> <p>Software Availability</p> <p>The benchmark analysis results and the compressed archive of the TOPS++FATCAT program for Linux platform can be downloaded from the following web site: <url>http://fatcat.burnham.org/TOPS/</url></p> <p>Conclusion</p> <p>TOPS++FATCAT provides FATCAT accuracy and insights into protein structural changes at a speed comparable to sequence alignments, opening up a possibility of interactive protein structure similarity searches.</p