Integrating LabVIEW into a Distributed Computing Environment

Being easy to learn and well suited for a self-contained desktop laboratory setup, many casual programmers prefer to use the National Instruments LabVIEW environment to develop their logic. An ActiveX interface is presented that allows integration into a plant-wide distributed environment based on the Experimental Physics and Industrial Control System (EPICS). This paper discusses the design decisions and provides performance information, especially considering requirements for the Spallation Neutron Source (SNS) diagnostics system.Comment: 3 pages, 2 figures, 8th International Conference on Accelerator and Large Experimental Physics Control Systems (PSN THAP032), San Jose, CA, USA, November 27-3

The dynamics of iterated transportation simulations

Iterating between a router and a traffic micro-simulation is an increasibly accepted method for doing traffic assignment. This paper, after pointing out that the analytical theory of simulation-based assignment to-date is insufficient for some practical cases, presents results of simulation studies from a real world study. Specifically, we look into the issues of uniqueness, variability, and robustness and validation. Regarding uniqueness, despite some cautionary notes from a theoretical point of view, we find no indication of ``meta-stable'' states for the iterations. Variability however is considerable. By variability we mean the variation of the simulation of a given plan set by just changing the random seed. We show then results from three different micro-simulations under the same iteration scenario in order to test for the robustness of the results under different implementations. We find the results encouraging, also when comparing to reality and with a traditional assignment result. Keywords: dynamic traffic assignment (DTA); traffic micro-simulation; TRANSIMS; large-scale simulations; urban planningComment: 24 pages, 7 figure

Control System for the LEDA 6.7-MeV Proton Beam Halo Experiment

Measurement of high-power proton beam-halo formation is the ongoing scientific experiment for the Low Energy Demonstration Accelerator (LEDA) facility. To attain this measurement goal, a 52-magnet beam line containing several types of beam diagnostic instrumentation is being installed. The Experimental Physics and Industrial Control System (EPICS) and commercial software applications are presently being integrated to provide a real-time, synchronous data acquisition and control system. This system is comprised of magnet control, vacuum control, motor control, data acquisition, and data analysis. Unique requirements led to the development and integration of customized software and hardware. EPICS real-time databases, Interactive Data Language (IDL) programs, LabVIEW Virtual Instruments (VI), and State Notation Language (SNL) sequences are hosted on VXI, PC, and UNIX-based platforms which interact using the EPICS Channel Access (CA) communication protocol. Acquisition and control hardware technology ranges from DSP-based diagnostic instrumentation to the PLC-controlled vacuum system. This paper describes the control system hardware and software design, and implementation.Comment: LINAC2000 Conference, 4 pg

Effect of water vapor on the activity of Pt-Pd/Al2O3 catalysts for methane combustion

A study on the deactivation phenomena affecting the catalysts of small-scale natural gas catalytic combustors was undertaken in this work. The influence of simulated aging pretreatments on the activity of Pt-Pd catalysts supported over gamma alumina for the catalytic combustion of CH4 was assessed under atmospheric conditions and in the 50–950 °C temperature range. Accelerated deactivation tests consisted of steaming at temperatures between 500–800 °C. The results showed that the activity of the deactivated catalysts depended on two opposite phenomena. An enhancement of the activity was encountered for low aging temperatures and was addressed to chlorine (Cl) elimination (as detected by chemical analysis). Conversely, at higher temperatures the accelerated aging treatment produced a decrease in the activity, and this was allegedly linked to a decrease in the available metal surface area produced by sintering. During the catalyst lifespan and under real operation conditions, a first period is therefore expected where the catalytic activity improves due to the Cl elimination by the water (H2O) produced during combustion. Afterwards, the activity would decrease because of the sintering of the metal phase. Both processes, Cl elimination and sintering, occur simultaneously. Five different catalyst formulations with variable Pt and Pd contents were tried and 0.4%Pt-0.8%Pd was found to be the most active. The results found are discussed in terms of the activity of the monometallic catalysts, the degree of interaction of the Pt and Pd phases and the previously mentioned phenomena of sintering and Cl elimination.Fil: Pieck, Carlos Luis. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Investigaciones en Catálisis y Petroquímica ; ArgentinaFil: Vera, Carlos Roman. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Investigaciones en Catálisis y Petroquímica ; ArgentinaFil: Peirotti, Eduardo M.. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Investigaciones en Catálisis y Petroquímica ; ArgentinaFil: Yori, Juan Carlos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Investigaciones en Catálisis y Petroquímica ; Argentin

Oxidation of o-xylene to phthalic anhydride on Sb-V/ZrO2 catalysts

Zirconia-supported and bulk-mixed vanadium-antimonium catalysts were used for the oxidation of o-xylene to phthalic anhydride. Vanadium promoted the transition of tetragonal to monoclinic zirconia. The simultaneous presence of antimony and vanadium on zirconia at low coverage led to a preferential interaction of individual V and Sb oxides with the zirconia surface rather than the formation of a binary Sb-V oxide, while at higher Sb-V contents, the formation of SbVO4 took place. Sb-V-ZrO2 catalysts showed high activity for o-xylene conversion and better selectivity to phthalic anhydride as compared to V/ZrO2 catalysts. However, their selectivity to phthalic anhydride was poor compared to V/TiO2 commercial catalysts. The improved selectivity of the Sb-containing catalysts was attributed to the blocking of non-effective surface sites of ZrO2, the decrease of the total amount of acid sites and the formation of surface V-O-Sb-O-V structures.Fil: Pieck, Carlos Luis. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Instituto de Catálisis y Petroleoquímica; EspañaFil: del Val, S.. Instituto de Catálisis y Petroleoquímica; EspañaFil: López Granados, M.. Instituto de Catálisis y Petroleoquímica; EspañaFil: Bañares, M.A.. Instituto de Catálisis y Petroleoquímica; EspañaFil: Fierro, J.L.G.. Instituto de Catálisis y Petroleoquímica; Españ

Big data and multiple methods for mapping small reservoirs: comparing accuracies for applications in agricultural landscapes

Whether or not reservoirs contain water throughout the dry season is critical to avoiding late season crop failure in seasonally-arid agricultural landscapes. Locations, volumes, and temporal dynamics, particularly of small (<1 Mm3) reservoirs are poorly documented globally, thus making it difficult to identify geographic and intra-annual gaps in reservoir water availability. Yet, small reservoirs are the most vulnerable to drying out and often service the poorest of farmers. Using the transboundary Volta River Basin (~413,000 sq km) in West Africa as a case study, we present a novel method to map reservoirs and quantify the uncertainty of Landsat derived reservoir area estimates, which can be readily applied anywhere in the globe. We applied our method to compare the accuracy of reservoir areas that are derived from the Global Surface Water Monthly Water History (GSW) dataset to those that are derived when surface water is classified on Landsat 8 OLI imagery using the Normalised Difference Water Index (NDWI), Modified NDWI with band 6 (MNDWI1), and Modified NDWI with band 7 (MNDWI2). We quantified how the areal accuracies of reservoir size estimates vary with the water classification method, reservoir properties, and environmental context, and assessed the options and limitations of using uncertain reservoir area estimates to monitor reservoir dynamics in an agricultural context. Results show that reservoir area estimates that are derived from the GSW data are 19% less accurate for our study site than MNDWI1 derived estimates, for a sample of 272 reservoir extents of 0.09 to 72 ha. The accuracy of Landsat-derived estimates improves with reservoir size and perimeter-area ratio, while accuracy may decline as surface vegetation increases. We show that GSW derived reservoir area estimates can provide an upper limit for current reservoir capacity and seasonal dynamics of larger reservoirs. Data gaps and uncertainties make GSW derived reservoir extents unsuitable for monitoring reservoirs that are smaller than 5.1 ha (holding ~49,759 m3), which constitute 674 (56%) reservoirs in the Volta basin, or monitoring seasonal fluctuations of most small reservoirs, limiting its utility for agricultural planning. This study is one of the first to test the utility and limitations of the newly available GSW dataset and provides guidance on the conditions under which this, and other Landsat-based surface water maps, can be reliably used to monitor reservoir resources

Oxaliplatin-DNA adduct formation in white blood cells of cancer patients

In this study, we investigated the kinetics of oxaliplatin-DNA adduct formation in white blood cells of cancer patients in relation to efficacy as well as oxaliplatin-associated neurotoxicity. Thirty-seven patients with various solid tumours received 130 mg m−2 oxaliplatin as a 2-h infusion. Oxaliplatin-DNA adduct levels were measured in the first cycle using adsorptive stripping voltammetry. Platinum concentrations were measured in ultrafiltrate and plasma using a validated flameless atomic absorption spectrometry method. DNA adduct levels showed a characteristic time course, but were not correlated to platinum pharmacokinetics and varied considerably among individuals. In patients showing tumour response, adduct levels after 24 and 48 h were significantly higher than in nonresponders. Oxaliplatin-induced neurotoxicity was more pronounced but was not significantly different in patients with high adduct levels. The potential of oxaliplatin-DNA adduct measurements as pharmacodynamic end point should be further investigated in future trials

Hidrogenación selectiva de metil ésteres de ácidos grasos para obtención de alcoholes grasos. I. Perspectivas actuales, catalizadores y mecanismos de reacción.

A review is presented about the production of fatty alcohols by selective hydrogenation of the corresponding fatty acid methyl esters. The process technology status is also presented with references tochemical process types and catalysts, and the current trends in the research field on this area are discussed. Recent advances in the elucidation of catalytic reaction mechanisms according to the new structural and functional characteristics of prototype catalysts developed to improve this process are commented in brief. Some simplified kinetics models potentially useful for the catalytic reaction modeling are proposed