44 research outputs found
Influence of E.E.C. unions on economic policy
The practice of workers' participation the
decision-making process of management, as well as trade
union participation in advisory bodies which Influence
various aspects of government socio-economic policies, has
long been established in Western Europe. With the
development of tripartite bodies in the European Economic
Community CE.E.C.) the influence of trade union
organisations in the formulation of the Commission's social
and economic policies has increased as a whole in the last
two decades, despite the fact that the influence of trade
unions in the Federal Republic of Germany and the United
Kingdom has decreased in the last few years. This happened
because of the deteriorating relations between the trade
unions and the conservative governments of those two
countries, and especially of the latte
Relative humidity vertical profiling using lidar-based synergistic methods in the framework of the Hygra-CD campaign
Accurate continuous measurements of relative hu- midity (RH) vertical profiles in the lower troposphere have become a significant scientific challenge. In recent years a synergy of various ground-based remote sensing instru- ments have been successfully used for RH vertical profil- ing, which has resulted in the improvement of spatial reso- lution and, in some cases, of the accuracy of the measure- ment. Some studies have also suggested the use of high- resolution model simulations as input datasets into RH ver- tical profiling techniques. In this paper we apply two syn- ergetic methods for RH profiling, including the synergy of lidar with a microwave radiometer and high-resolution at- mospheric modeling. The two methods are employed for RH retrieval between 100 and 6000 m with increased spatial res- olution, based on datasets from the HygrA-CD (Hygroscopic Aerosols to Cloud Droplets) campaign conducted in Athens, Greece from May to June 2014. RH profiles from synergetic methods are then compared with those retrieved using single instruments or as simulated by high-resolution models. Our proposed technique for RH profiling provides improved sta- tistical agreement with reference to radiosoundings by 27 % when the lidar–radiometer (in comparison with radiometer measurements) approach is used and by 15 % when a lidar model is used (in comparison with WRF-model simulations). Mean uncertainty of RH due to temperature bias in RH pro- filing was ~ 4 . 34 % for the lidar–radiometer and ~ 1 . 22 % for the lidar–model methods. However, maximum uncer- tainty in RH retrievals due to temperature bias showed that lidar-model method is more reliable at heights greater than 2000 m. Overall, our results have demonstrated the capabil- ity of both combined methods for daytime measurements in heights between 100 and 6000 m when lidar–radiometer or lidar–WRF combined datasets are available.Peer ReviewedPostprint (author's final draft
Application and testing of the extended-Kalman-filtering technique for determining the planetary boundary-layer height over Athens, Greece
The final publication is available at Springer via http://dx.doi.org/10.1007/s10546-020-00514-zWe investigate the temporal evolution of the planetary boundary-layer (PBL) height over the basin of Athens, Greece, during a 6-year period (2011–2016), using data from a Raman lidar system. The range-corrected lidar signals are selected around local noon (1200 UTC) and midnight (0000 UTC), for a total of 332 cases: 165 days and 167 nights. In this dataset, the extended-Kalman filtering technique is applied and tested for the determination of the PBL height. Several well-established techniques for the PBL height estimation based on lidar data are also tested for a total of 35 cases. The lidar-derived PBL heights are compared to those derived from radiosonde data. The mean PBL height over Athens is found to be 1617¿±¿324 m at 1200 UTC and 892¿±¿130 m at 0000 UTC for the period examined, while the mean PBL-height growth rate is found to be 170¿±¿64 m h-1 and 90¿±¿17 m h-1 during daytime and night-time, respectively.The research leading to these results has received additional funding from the European Union 7th Framework Program (FP7/2011-2015) and Horizon 2020/2015-2021 Research and Innovation program (ACTRIS) under grant agreements nos 262254, 654109, and 739530, as well as from Spanish National Science Foundation and FEDER funds PGC2018-094132-B-I00. CommSensLab-UPC is a MarÃa-de-Maeztu Excellence Unit, MDM-2016-0600, funded by the Agencia Estatal de Investigación, Spain.Peer ReviewedPostprint (author's final draft
Application of a synergetic lidar and sunphotometer algorithm for the characterization of a dust event over Athens, Greece
We present first retrievals of the Lidar-Radiometer Inversion Code (LIRIC), applied on combined lidar and sunphotometer data during a Saharan dust episode over Athens, Greece, on July 20, 2011. A full lidar dataset in terms of backscatter signals at 355, 532 and 1064 nm, as well as depolarization at 532 nm was acquired from the European Aerosol Research Network (EARLINET) station of Athens and combined with Aerosol Robotic Network (AERONET) data, in order to retrieve the concentration and extinction coefficient profiles of dust. The lidar measurements showed a free tropospheric layer between 1-5 km above Athens, with low Ångström exponent of ~0.5 and high particle depolarization ratio, ~25-30%, both values characteristic of dust particles. The application of LIRIC revealed high concentration profiles of non-spherical coarse particles in the layer, in the range of 0.04-0.07 ppb and a smaller fine particle component with concentrations of ~0.01 ppb. The extinction coefficients at 532 nm ranged between 50 and 90 Mm-1 for coarse non-spherical particles and between 25 and 50Mm-1 for fine particles. The retrievals were compared with modeled dust concentration and extinction coefficient profiles from the Dust Regional Atmospheric Modeling (BSC-DREAM8b), showing good agreement, especially for the coarse modePostprint (published version
Sensitivity of boundary-layer variables to PBL schemes in the WRF model based on surface meteorological observations, lidar, and radiosondes during the HygrA-CD campaign
Air quality forecast systems need reliable and accurate representations of the planetary boundary layer (PBL) to perform well. An important question is how accurately numerical weather prediction models can reproduce conditions in diverse synoptic flow types. Here, observations from the summer 2014 HygrA-CD (Hygroscopic Aerosols to Cloud Droplets) experimental campaign are used to validate simulations from the Weather Research and Forecasting (WRF) model over the complex, urban terrain of the Greater Athens Area. Three typical atmospheric flow types were identified during the 39-day campaign based on 2-day backward trajectories: Continental, Etesians, and Saharan. It is shown that the numerical model simulations differ dramatically depending on the PBL scheme, atmospheric dynamics, and meteorological parameter (e.g., 2-m air temperature). Eight PBL schemes from WRF version 3.4 are tested with daily simulations on an inner domain at 1-km grid spacing. Near-surface observations of 2-m air temperature and relative humidity and 10-m wind speed are collected from multiple meteorological stations. Estimates of the PBL height come from measurements using a multiwavelength Raman lidar, with an adaptive extended Kalman filter technique. Vertical profiles of atmospheric variables are obtained from radiosonde launches, along with PBL heights calculated using bulk Richardson number. Daytime maximum PBL heights ranged from 2.57 km during Etesian flows, to as low as 0.37 km during Saharan flows. The largest differences between model and observations are found with simulated PBL height during Saharan synoptic flows. During the daytime, campaign-averaged near-surface variables show WRF tended to have a cool, moist bias with higher simulated wind speeds than the observations, especially near the coast. It is determined that non-local PBL schemes give the most agreeable solutions when compared with observations.Peer ReviewedPostprint (published version
Earlinet - lidar algorithm intercomparison
Postprint (published version
An EARLINET early warning system for atmospheric aerosol aviation hazards
A stand-alone lidar-based method for detecting
airborne hazards for aviation in near real time (NRT) is
presented. A polarization lidar allows for the identification
of irregular-shaped particles such as volcanic dust and
desert dust. The Single Calculus Chain (SCC) of the European
Aerosol Research Lidar Network (EARLINET) delivers
high-resolution preprocessed data: the calibrated total
attenuated backscatter and the calibrated volume linear
depolarization ratio time series. From these calibrated lidar
signals, the particle backscatter coefficient and the particle
depolarization ratio can be derived in temporally high resolution
and thus provide the basis of the NRT early warning
system (EWS). In particular, an iterative method for the retrieval
of the particle backscatter is implemented. This improved
capability was designed as a pilot that will produce alerts for imminent threats for aviation. The method is applied
to data during two diverse aerosol scenarios: first, a
record breaking desert dust intrusion in March 2018 over Finokalia,
Greece, and, second, an intrusion of volcanic particles
originating from Mount Etna, Italy, in June 2019 over
Antikythera, Greece. Additionally, a devoted observational
period including several EARLINET lidar systems demonstrates
the network’s preparedness to offer insight into natural
hazards that affect the aviation sector.ACTRIS-2
654109ACTRIS preparatory phase
739530EUNADICS-AV
723986E-shape (EuroGEOSS Showcases: Applications Powered by Europe)
820852Ministry of Research and Innovation, Ontario
19PFE/17.10.2018Romanian National Core Program
18N/2019European Commission
European Commission Joint Research Centre
72569
Lidar-Radiometer Inversion Code (LIRIC) for the retrieval of vertical aerosol properties from combined lidar/radiometer data: development and distribution in EARLINET
The financial support by the European Union's Horizon 2020 research and innovation programme (ACTRIS-2, grant agreement no. 654109) is gratefully acknowledged. The background of LIRIC algorithm and software was developed under the ACTRIS Research Infrastructure project, grant agreement no. 262254, within the European Union Seventh Framework Programme, which financial support is gratefully acknowledged.r I. Binietoglou received funding from the European Union's Seventh Framework Programme for research, technological development and demonstration under the grant agreement no. 289923 - ITARS.This paper presents a detailed description of
LIRIC (LIdar-Radiometer Inversion Code) algorithm for simultaneous processing of coincident lidar and radiometric
(sun photometric) observations for the retrieval of the aerosol
concentration vertical profiles. As the lidar/radiometric input data we use measurements from European Aerosol Research Lidar Network (EARLINET) lidars and collocated
sun-photometers of Aerosol Robotic Network (AERONET).
The LIRIC data processing provides sequential inversion of
the combined lidar and radiometric data. The algorithm starts
with the estimations of column-integrated aerosol parameters
from radiometric measurements followed by the retrieval of
height dependent concentrations of fine and coarse aerosols
from lidar signals using integrated column characteristics of aerosol layer as a priori constraints. The use of polarized lidar observations allows us to discriminate between spherical
and non-spherical particles of the coarse aerosol mode.
The LIRIC software package was implemented and tested
at a number of EARLINET stations. Intercomparison of the
LIRIC-based aerosol retrievals was performed for the observations by seven EARLINET lidars in Leipzig, Germany on
25 May 2009. We found close agreement between the aerosol
parameters derived from different lidars that supports high
robustness of the LIRIC algorithm. The sensitivity of the retrieval results to the possible reduction of the available observation data is also discussed.European Union (EU)
654109ACTRIS Research Infrastructure project within the European Union
262254European Union (EU)
289923 - ITAR
Recommended from our members
Lidar-Radiometer Inversion Code (LIRIC) for the retrieval of vertical aerosol properties from combined lidar/radiometer data: Development and distribution in EARLINET
This paper presents a detailed description of LIRIC (LIdar-Radiometer Inversion Code) algorithm for simultaneous processing of coincident lidar and radiometric (sun photometric) observations for the retrieval of the aerosol concentration vertical profiles. As the lidar/radiometric input data we use measurements from European Aerosol Research Lidar Network (EARLINET) lidars and collocated sun-photometers of Aerosol Robotic Network (AERONET). The LIRIC data processing provides sequential inversion of the combined lidar and radiometric data. The algorithm starts with the estimations of column-integrated aerosol parameters from radiometric measurements followed by the retrieval of height dependent concentrations of fine and coarse aerosols from lidar signals using integrated column characteristics of aerosol layer as a priori constraints. The use of polarized lidar observations allows us to discriminate between spherical and non-spherical particles of the coarse aerosol mode.
The LIRIC software package was implemented and tested at a number of EARLINET stations. Intercomparison of the LIRIC-based aerosol retrievals was performed for the observations by seven EARLINET lidars in Leipzig, Germany on 25 May 2009. We found close agreement between the aerosol parameters derived from different lidars that supports high robustness of the LIRIC algorithm. The sensitivity of the retrieval results to the possible reduction of the available observation data is also discussed
A methodology for investigating dust model performance using synergistic EARLINET/AERONET dust concentration retrievals
Systematic measurements of dust concentration profiles at a continental scale were recently made possible by the development of synergistic retrieval algorithms using combined lidar and sun photometer data and the establishment of robust remote-sensing networks in the framework of Aerosols, Clouds, and Trace gases Research Infra-Structure Network (ACTRIS)/European Aerosol Research Lidar Network (EARLINET). We present a methodology for using these capabilities as a tool for examining the performance of dust transport models. The methodology includes considerations for the selection of a suitable data set and appropriate metrics for the exploration of the results. The approach is demonstrated for four regional dust transport models (BSC-DREAM8b v2, NMMB/BSC-DUST, DREAM-ABOL, DREAM8-NMME-MACC) using dust observations performed at 10 ACTRIS/EARLINET stations. The observations, which include coincident multi-wavelength lidar and sun photometer measurements, were processed with the Lidar-Radiometer Inversion Code (LIRIC) to retrieve aerosol concentration profiles. The methodology proposed here shows advantages when compared to traditional evaluation techniques that utilize separately the available measurements such as separating the contribution of dust from other aerosol types on the lidar profiles and avoiding model assumptions related to the conversion of concentration fields to aerosol extinction values. When compared to LIRIC retrievals, the simulated dust vertical structures were found to be in good agreement for all models with correlation values between 0.5 and 0.7 in the 1-6 km range, where most dust is typically observed. The absolute dust concentration was typically underestimated with mean bias values of -40 to -20 mu g m(-3) at 2 km, the altitude of maximum mean concentration. The reported differences among the models found in this comparison indicate the benefit of the systematic use of the proposed approach in future dust model evaluation studies