2,414 research outputs found
Ample Provision: A Preliminary Study Relating Budget Composition and High School Graduation Rates in Select Washington State Public School Districts
How to allocate scarce resources for an optimal outcome is of keen interest to those who set the budgets in public education. Simply throwing money at schools is not enough; it is important that money is spent where it will do the most good. This study considers Washington State public school districts and examines how the share of per-student expenditures in seven budget categories relates to on-time high school graduation rates. It is an investigative study, exploring whether there is enough evidence to merit further, more in-depth research. Using budget and graduation information from academic years 1997-98 through 2016-17 for a representative sample of 63 districts, I estimated several dynamic panel models. From these I identified which budget categories most heavily impact graduation rates, and over what time horizon the impacts are apparent. I found no significant correlation and concluded that this would not be a fruitful avenue for further research
Performance of a First-Level Muon Trigger with High Momentum Resolution Based on the ATLAS MDT Chambers for HL-LHC
Highly selective first-level triggers are essential to exploit the full
physics potential of the ATLAS experiment at High-Luminosity LHC (HL-LHC). The
concept for a new muon trigger stage using the precision monitored drift tube
(MDT) chambers to significantly improve the selectivity of the first-level muon
trigger is presented. It is based on fast track reconstruction in all three
layers of the existing MDT chambers, made possible by an extension of the
first-level trigger latency to six microseconds and a new MDT read-out
electronics required for the higher overall trigger rates at the HL-LHC. Data
from -collisions at is used to study the
minimal muon transverse momentum resolution that can be obtained using the MDT
precision chambers, and to estimate the resolution and efficiency of the
MDT-based trigger. A resolution of better than is found in all sectors
under study. With this resolution, a first-level trigger with a threshold of
becomes fully efficient for muons with a transverse momentum
above in the barrel, and above in the
end-cap region.Comment: 6 pages, 11 figures; conference proceedings for IEEE NSS & MIC
conference, San Diego, 201
Examples of individual supported living for adults with intellectual disability
Background: This article provides a qualitative account of four models of support for adults with intellectual disability in individual supported living (ISL) arrangements. Materials and Methods: Completion of the first 50 evaluations of 150 arrangements for the third phase of the ISL project provided the examples. Results: Four approaches are described: living alone, co-residency, relationship and host family. Within each type, wide variations occur particularly based on security of tenure, formal and informal support and management variations. Conclusion: Fifty evaluations so far illustrated a wide range of approaches to ISL, providing evidence of the critical importance of the formal and informal support environment and reinforcing the contention that ISL is appropriate for people with high support needs
Development and testing of 140 GHz absorber coatings for the water baffle of W7-X cryopumps
Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter
A first prototype of a scintillator strip-based electromagnetic calorimeter
was built, consisting of 26 layers of tungsten absorber plates interleaved with
planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a
positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's
performance is presented in terms of the linearity and resolution of the energy
measurement. These results represent an important milestone in the development
of highly granular calorimeters using scintillator strip technology. This
technology is being developed for a future linear collider experiment, aiming
at the precise measurement of jet energies using particle flow techniques
Infrastructure for Detector Research and Development towards the International Linear Collider
The EUDET-project was launched to create an infrastructure for developing and
testing new and advanced detector technologies to be used at a future linear
collider. The aim was to make possible experimentation and analysis of data for
institutes, which otherwise could not be realized due to lack of resources. The
infrastructure comprised an analysis and software network, and instrumentation
infrastructures for tracking detectors as well as for calorimetry.Comment: 54 pages, 48 picture
Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter
We present a study of showers initiated by electrons, pions, kaons, and
protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE
scintillator-tungsten analogue hadronic calorimeter. The data were recorded at
the CERN Super Proton Synchrotron in 2011. The analysis includes measurements
of the calorimeter response to each particle type as well as measurements of
the energy resolution and studies of the longitudinal and radial shower
development for selected particles. The results are compared to Geant4
simulations (version 9.6.p02). In the study of the energy resolution we include
previously published data with beam momenta from 1 GeV to 10 GeV recorded at
the CERN Proton Synchrotron in 2010.Comment: 35 pages, 21 figures, 8 table
Hadron shower decomposition in the highly granular CALICE analogue hadron calorimeter
The spatial development of hadronic showers in the CALICE scintillator-steel
analogue hadron calorimeter is studied using test beam data collected at CERN
and FNAL for single positive pions and protons with initial momenta in the
range from 10 to 80 GeV/c. Both longitudinal and radial development of hadron
showers are parametrised with two-component functions. The parametrisation is
fit to test beam data and simulations using the QGSP_BERT and FTFP_BERT physics
lists from Geant4 version 9.6. The parameters extracted from data and simulated
samples are compared for the two types of hadrons. The response to pions and
the ratio of the non-electromagnetic to the electromagnetic calorimeter
response, h/e, are estimated using the extrapolation and decomposition of the
longitudinal profiles.Comment: 38 pages, 19 figures, 5 tables; author list changed; submitted to
JINS
Pion and proton showers in the CALICE scintillator-steel analogue hadron calorimeter
Showers produced by positive hadrons in the highly granular CALICE
scintillator-steel analogue hadron calorimeter were studied. The experimental
data were collected at CERN and FNAL for single particles with initial momenta
from 10 to 80 GeV/c. The calorimeter response and resolution and spatial
characteristics of shower development for proton- and pion-induced showers for
test beam data and simulations using Geant4 version 9.6 are compared.Comment: 26 pages, 16 figures, JINST style, changes in the author list, typos
corrected, new section added, figures regrouped. Accepted for publication in
JINS
The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers
The intrinsic time structure of hadronic showers influences the timing
capability and the required integration time of hadronic calorimeters in
particle physics experiments, and depends on the active medium and on the
absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15
small plastic scintillator tiles read out with Silicon Photomultipliers, the
time structure of showers is measured on a statistical basis with high spatial
and temporal resolution in sampling calorimeters with tungsten and steel
absorbers. The results are compared to GEANT4 (version 9.4 patch 03)
simulations with different hadronic physics models. These comparisons
demonstrate the importance of using high precision treatment of low-energy
neutrons for tungsten absorbers, while an overall good agreement between data
and simulations for all considered models is observed for steel.Comment: 24 pages including author list, 9 figures, published in JINS
- …