Caracterización estructural de vidrios del sistema SiO2- B2O3-Na2O mediante espectroscopías IR y Raman

Infrared and Raman spectroscopies have been used to analyze two series of sodium silicoborate glasses with 10 % and 20 % of Na2O. The obtained results are in accordance with those found in literature when using Raman and Infrared spectroscopies, however here it has been analyze in more detail the Polimerization Index (IP) of both systems. It has been observed that IP decreases with B concentration except for low B content glasses. This result has been assigned to an incomplete melting of such glasses due to the high temperatures needed to obtain well-melting glasses. Finally, it has been analyzed the BO4/BO3 ratio as a function of the Na2O concentration, showing that as it would be expected the high BO4 concentration appears when the Na2O concentration is between 0.3 – 0.4 in moles.Peer reviewe

Artificial neural network algorithm for online glucose prediction from continuous glucose monitoring.

Background and Aims: Continuous glucose monitoring (CGM) devices could be useful for real-time management of diabetes therapy. In particular, CGM information could be used in real time to predict future glucose levels in order to prevent hypo-/hyperglycemic events. This article proposes a new online method for predicting future glucose concentration levels from CGM data. Methods: The predictor is implemented with an artificial neural network model (NNM). The inputs of the NNM are the values provided by the CGM sensor during the preceding 20 min, while the output is the prediction of glucose concentration at the chosen prediction horizon (PH) time. The method performance is assessed using datasets from two different CGM systems (nine subjects using the Medtronic [Northridge, CA] Guardian® and six subjects using the Abbott [Abbott Park, IL] Navigator®). Three different PHs are used: 15, 30, and 45 min. The NNM accuracy has been estimated by using the root mean square error (RMSE) and prediction delay. Results: The RMSE is around 10, 18, and 27 mg/dL for 15, 30, and 45 min of PH, respectively. The prediction delay is around 4, 9, and 14 min for upward trends and 5, 15, and 26 min for downward trends, respectively. A comparison with a previously published technique, based on an autoregressive model (ARM), has been performed. The comparison shows that the proposed NNM is more accurate than the ARM, with no significant deterioration in the prediction delay

Determination of regulated and emerging mycotoxins in organic and conventional gluten-free flours by LC-MS/MS

Gluten-free cereal products have grown in popularity in recent years as they are perceived as “healthier” alternatives and can be safely consumed by celiac patients, and people with gluten intolerance or wheat allergies. Molds that produce mycotoxins contaminate cereal crops, posing a threat to global food security. Maximum levels have been set for certain mycotoxins in cereal flours; however, little is known about the levels of emerging mycotoxins in these flours. The aim of this study was to develop an efficient, sensitive, and selective method for the detection of four emerging (beauvericin and enniatins A1, B, and B1) and three regulated (aflatoxin B1, zearalenone, and deoxynivalenol) mycotoxins in gluten-free flours. Ultrasound-assisted matrix solid-phase dispersion was used in the extraction of these mycotoxins from flour samples. The validated method was utilized for the LC-MS/MS analysis of conventional and organic wholegrain oat and rice flours. Six of the seven target mycotoxins were detected in these samples. Multi-mycotoxin contamination was found in all flour types, particularly in conventional wholegrain oat flour. Despite the low detection frequency in rice flour, one sample was found to contain zearalenone at a concentration of 83.2 µg/kg, which was higher than the level set by the European Commission for cereal flours. The emerging mycotoxins had the highest detection frequencies; enniatin B was present in 53% of the samples at a maximum concentration of 56 µg/kg, followed by enniatin B1 and beauvericin, which were detected in 46% of the samples, and at levels reaching 21 µg/kg and 10 µg/kg, respectively. These results highlight the need to improve the current knowledge and regulations on the presence of mycotoxins, particularly emerging ones, in gluten-free flours and cereal-based product

Influence of collision energy on the dynamics of the reaction O(1D) + CH4(X1A 1) → OH(X2Π) + CH3(X2 A2'')

We studied the effects of collision energy (ET) on the dynamics of the title reaction using the quasiclassical trajectory method on an analytical triatomic potential energy surface we had derived for this system. We compared the dependence of the scalar and two-vector properties of the reaction on ET with experimental data and obtained a quite good agreement. The results can be explained in terms of the coexistence of two microscopic reaction mechanisms: insertion and abstraction. The former mechanism is the most important one, although the contribution of the latter increases with ET

Eudragit® L100/chitosan composite thin bilayer films for intravaginal pH-responsive release of Tenofovir

[EN] The high rate of HIV new infections and AIDS-related deaths each year make prevention tools still necessary today. Different dosage forms – including films – for vaginal administration of antiretroviral drugs have been developed for this purpose. Six batches of Tenofovir-loaded films were formulated based on Eudragit® L100 (EL100) and chitosan, containing triethyl citrate and glycerol. In all the cases films structured in two layers – the upper layer mainly attributed to EL100 and the lower layer to chitosan – were revealed by SEM. A higher content in EL100 and plasticizers improves the mechanical properties and control over drug release in the vaginal medium without affecting mucoadhesion. The EL100-based layer acts as a structuring agent that controls Tenofovir release for days in the vaginal medium while it occurs in a few hours in the presence of seminal fluid. Bilayer films with the highest tested content of EL100 and plasticizers would be the most suitable as vaginal microbicides as they are easier to administer due to their excellent mechanical properties and they offer more comfortable posology and enhanced protection against HIV during intercourse due to their pH-responsive release of Tenofovir.This work was supported by the Spanish Research Agency and the European Regional Development Fund (AEI/FEDER, UE) [MAT2016-76416-R]

Effects of transcranial static magnetic field stimulation over the left dorsolateral prefrontal cortex on random number generation

OBJECTIVE: Focal application of transcranial static magnetic field stimulation (tSMS) is a neuromodulation technique, with predominantly inhibitory effects when applied to the motor, somatosensory or visual cortex. Whether this approach can also transiently interact with dorsolateral prefrontal cortex (DLPFC) function remains unclear. The suppression of habitual or competitive responses is one of the core executive functions linked to DLPFC function. This study aimed to assess the impact of tSMS on the prefrontal contributions to inhibitory control and response selection by means of a RNG task. METHODS: We applied 20 min of tSMS over the left DLPFC of healthy subjects, using a real/sham cross-over design, during performance of a RNG task. We used an index of randomness calculated with the measures of entropy and correlation to assess the impact of stimulation on DLPFC function. RESULTS: The randomness index of the sequences generated during the tSMS intervention was significantly higher compared to those produced in the sham condition. CONCLUSIONS: Our results indicate that application of tSMS transiently modulates specific functional brain networks in DLPFC, which indicate a potential use of tSMS for treatment of neuropsychiatric disorders. SIGNIFICANCE: This study provides evidence for the capacity of tSMS for modulating DLPFC function

High-temperature anti-Invar behavior of gamma-Fe precipitates in Fe_xCu_(100-x) solid solutions: Ferromagnetic phases

High-temperature magnetization and neutron diffraction measurements on metastable Fe_xCu_(100-x) solid solutions have recently shown to imply that γ-Fe precipitates present ferromagnetic anti-Invar behavior. For this reason, we have studied the ferromagnetic phases of γ-Fe in moment-volume parameter space, using the general potential linearized-augmented plane-wave method and the fixed spin moment procedure in order to calculate the corresponding total energy. We find that only two ferromagnetic phases (one related to a low- spin state and the other to a high-spin state) can exist and even coexist in limited volume ranges (3.55-3.59 Å). Hence, our results provide a "revisited" version of the local spin density calculations used in the early article by Moruzzi [Phys. Rev. B 34, 1784 (1986)]. In addition, the fixed spin moment method-using an energy-moment-volume space representation-allows us to conclude that the high-spin state is the ground state of the gamma-Fe precipitates, as the anti-Invar behavior is an intrinsic property of these states. This simple scenario seems to adequately describe the perplexing phenomenology recently observed on Fe_xCu_(100-x) solid solutions

Proyecto PREDIRCAM 2. Análisis preliminar de uso y valoración de la plataforma

En la actualidad, la prevalencia de las enfermedades no transmisibles (Non-communicable diseases NCD) y la cantidad de muertes causadas por éstas es muy elevada, en su mayoría, consecuencia del envejecimiento de la población, el aumento de la obesidad y los hábitos de vida sedentarios. En este trabajo se describen el funcionamiento y los resultados preliminares del proyecto Predircam 2, destinado al desarrollo y validación de una plataforma inteligente de tecnologías biomédicas para la monitorización, prevención y tratamiento personalizados del sobrepeso, la obesidad y la prevención de enfermedades asociadas como la diabetes, hipertensión arterial o alteraciones del metabolismo lipídico. El objetivo de este trabajo es presentar los resultados preliminares del análisis del uso de la plataforma, la evaluación de la usabilidad y la valoración de la atención recibida por los pacientes en relación a los profesionales sanitarios