Self-Efficacy and Use of Electronic Information as Predictors of Academic Performance

Abstract Students’ ability to find and retrieve information effectively is a transferable skill useful for their future life as well as enabling the positive and successful use of the electronic resources while at school. It is a known fact in this digital era that any student at the higher level who intends to better achieve and go further in academics should have the ability to explore the digital environment. Students are increasingly expected to use electronic information resources while at the university. Research was undertaken to determine the level of influence of self-efficacy and the use of electronic information resources on students’ academic performance. This study examined self-efficacy and the use of electronic information as predictors of academic performance. Its participants were comprised of 700 students (undergraduate and postgraduate) randomly drawn from seven departments in the faculty of education, University of Ibadan, Nigeria. Data on the study was collected through the Morgan-Jinks (1999) academic self-efficacy scale and the use of the electronic information scale (UEIS) with r = 0.75. Three research questions were raised to guide the study. The results indicate that self-efficacy and the use of electronic information jointly predict and contribute to academic performance; that respondents with high self-efficacy make better use of electronic information and have better academic performance; that a correlation exists among self-efficacy, use of electronic information and academic performance; and that the use of electronic information influenced respondents\u27 performance in General Education subjects more than other subjects. Finally, the results reveal that the Internet is the electronic information source students access for information most often. Implications of these results and recommendations are discussed

EFFECTIVE ALKALINE PEROXIDE OXIDATION PRETREATMENT OF SHEA TREE SAWDUST FOR THE PRODUCTION OF BIOFUELS: KINETICS OF DELIGNIFICATION AND ENZYMATIC CONVERSION TO SUGAR AND SUBSEQUENT PRODUCTION OF ETHANOL BY FERMENTATION USING Saccharomyces cerevisiae

Shea tree sawdust delignification kinetic data during alkaline peroxide pretreatment were investigated at temperatures of 120 °C, 135 °C, and 150 °C. The activation energy during delignification was 76.4 kJ/mol and the Arrhenius constant was calculated as 8.4 x 106 per min. The reducing sugar yield for the treated to the untreated biomass was about 22-fold. Enzymatic hydrolysis conditions studied were; time (72 h and 96 h), substrate concentration (20, 30, 40, and 50 g/L), and enzyme loadings (10, 25, 40, 50 FPU/g dry biomass), which showed the optimum conditions of 96 h, 40 g/L, and 25 FPU/g dry biomass at 45 °C hydrolysis temperature. At the optimized enzymatic hydrolysis conditions, the reducing sugar yield was 416.32 mg equivalent glucose/g treated dry biomass. After 96 h fermentation of treated biomass, the ethanol obtained at 2% effective cellulose loading was 12.73 g/L. Alkaline peroxide oxidation pretreatment and subsequent enzymatic hydrolysis improved the ethanol yield of the biomass

Utilization of lignocellulosic waste for ethanol production: Enzymatic digestibility and fermentation of pretreated shea tree sawdust

Enzymatic hydrolysis and fermentation methods were evaluated on alkaline peroxide pretreated shea tree sawdust conversion to ethanol. Optimum pretreatment conditions of 120 oC reaction temperature, 30 min reaction time, and 20 mL L−1 of water hydrogen peroxide concentration (1%(v/v)H2O2) solubilized 679 g kg−1 of hemicellulose and 172 g kg−1 of lignin. 617 g kg−1 cellulose was retained in the solid fraction. The maximum yield of reducing sugar with optimized enzyme loadings by two enzyme preparations (cellulase and β-glucosidase) was 165 g kg−1 of dry biomass. The ethanol yield was 7.35 g L−1 after 72 h incubation period under the following conditions: 2% cellulose loading, enzyme concentration was 25 FPU (g cellulose)−1 loading, yeast inoculums was 10% (v/v), 32 oC, and pH 4.8. The pretreatments gave information about the hindrances caused by lignin presence in lignocellulosic materials and that hemicelluloses are better hydrolyzed than lignin, thereby enhancing enzymatic digestibility of the sawdust materia

Five-year publication rate of clinical presentations at the open and closed American shoulder and elbow surgeons annual meeting from 2005–2010

© 2016, The Author(s). Background: The purpose of this study was to evaluate the five-year publication rate of papers presented at both the open and closed American Shoulder and Elbow Surgeons’ (ASES) annual meetings from 2005 to 2010. Methods: Online abstracts of the presentations at the open and closed ASES annual meetings were independently screened for clinical studies and graded for quality using level of evidence. The databases PubMed (MEDLINE), Ovid (MEDLINE), and EMBASE were comprehensively searched for full-text publications corresponding to these presentations and any paper published within five years of the presentation date was counted. Results: Overall, 131/266 papers corresponding to the meeting presentations were identified for a five-year publication rate of 49.2 %. Sixty two (48 %) of the papers were published in The Journal of Shoulder and Elbow Surgeons, 23 (18 %) were published in The American Journal of Sports Medicine, and 20 (16 %) were published in The Journal of Bone and Joint Surgery. The mean patient sample size included in presentations with a subsequent full-text publication was higher (154; standard error =27) than the presentations not published (93; standard error = 13) (p = 0.039). There was no correlation (p = 0.248) between the publication rate and the level of evidence of the presentations. Conclusions: The publication rate of presentations at ASES meetings from 2005 to 2010 is similar to that reported from other orthopaedic meetings. Studies with large sample sizes should continue to be encouraged, and high quality presentations must consistently be followed up with full-text manuscript preparation in order to maximize the future clinical impact

Preliminary Assessment on the Effect of Bentonite and Ibeshe Clay on Bleaching of Rubber (Hevea Brasiliensis) Seed Oil

Rubber seed though not common known is very rich in its oil yield and over time its importance is becoming more prominent. Bleaching in the natural sense is relative to the removal of impurities from the oil or material. In this research work, Rubber seed oil was bleached using bentonite clay and Ibeshe clay at 0.5M, 1M and 2M concentrations of Hydrochloric acid. Physiochemical properties as well as spectroscopic analysis such as FT-IR and XRD analysis were carried out and aided in obtaining the bleaching efficiency of both clays. The FT-IR results displayed a visible change in the oil after it was bleached with Ibeshe clay but still retained most its functional group when bleached with bentonite clay. At 2M concentration of the acid, the oil bleached with bentonite showed 53% while with Ibeshe clay it remained at 16%. This summarizes that Ibeshe clay has little to no effect on bleaching performanc

Hydrogen peroxide and lime based oxidative pretreatment of wood waste to enhance enzymatic hydrolysis for a biorefinery: Process parameters optimization using response surface methodology

Response surface methodology (RSM) was adopted for the optimization of process variables in the alkaline peroxide oxidation (APO) pretreatment of Vitellaria paradoxa sawdust based on central composite design (CCD) experiments. A 23 five level CCD with central and axial points was used to develop a statistical model for the optimization of process variables. Maximum response for the pretreatment was obtained when applying the optimum values for temperature (150 �C), time (45 min), and 1% (v/v) H2O2. At the optimum conditions, up to 70% of the initial hemicellulose was removed in treatments, which also caused some delignification (up to 11% of the initial lignin was removed), whereas cellulose was almost quantitatively retained in the solid phase. Alkaline peroxide assisted wet air oxidation (APAWAO) pretreatment at the optimum conditions resulted in enrichment up to 60% cellulose content along with solubilization of 80% hemicellulose and 17% of lignin initially present in the raw sawdust. Reducing sugars yield after 72 h enzymatic hydrolysis of pretreated biomass at optimized APO conditions was 177.89 mg equivalent glucose g�1 dry biomass. Addition of 10 bar air pressure at the optimized pretreatment conditions increased the sugars yield to 263.49 mg equivalent glucose g�1 dry biomass

Inhibitive Corrosion Performance of the Eco‐Friendly Aloe Vera in Acidic Media of Mild and Stainless Steels

The inhibitive behaviour of aloe vera as an eco‐friendly inhibitor was studied in the corrosion of mild and stainless steel in 0.5 M H2SO4 medium. The varied aloe vera inhibitor concentrations were studied using weight loss (gravimetric) and linear polarization methods. The methods showed that the inhibition efficiency increased with an increase in the concentration of the inhibitor (up to 10 vol/vol%) for both the mild and stainless steels. Stainless steel was found to exhibit a lower corrosion rate compared to mild steel. The results showed that Langmuir adsorption isotherm was obeyed by the inhibition of mild and stainless steel using aloe vera in 0.5 M H2SO4 with the values of the regression coefficients near unity. The negative values of ΔGads show the spontaneous adsorption of inhibitor on the mild and stainless steel surfaces and a physisorption adsorption mechanism of the aloe vera inhibitor since the values of ΔGads obtained are more than − 20 kJ/mol, that is, aloe vera is an efficient corrosion inhibitor with mixed‐type inhibition property

Optimization of pretreatment conditions using full factorial design and enzymatic convertibility of shea tree sawdust

In this study alkaline wet air oxidation (WAO), alkaline peroxide assisted wet air oxidation (APAWAO), and enzymatic hydrolysis methods were evaluated for conversion of wood residue (sawdust) to reducing sugars. Cellulose content, hemicellulose solubilization, and lignin removal forWAOpretreatment conditions were optimized by statistical analysis using a 23-full factorial design with reaction temperature, air pressure, and reaction time as the process parameters. An optimum WAO condition of 170 �C, 1.0 MPa, 10 min was predicted and experimentally validated to give 518 g kg-1 cellulose content, 580 g kg-1 hemicellulose solubilization, and 171 g kg-1 lignin removal in the solid fraction. About 7 g L-1 reducing sugars was detected in the pretreated liquid fraction. Presoaking the dry raw biomass for 24 h in H2O2 followed by wet air oxidation (APAWAO) at the optimized conditions resulted in enrichment up to 683 g kg-1 cellulose content in the solid fraction along with solubilization of 789 g kg-1 hemicellulose and 280 g kg-1 lignin removal. The yield of reducing sugars from WAO optimized conditions by two enzyme preparations (cellulase and b-glucosidase) was 131mgg-1 of dry substrate, while the APAWAO yielded 274mgg-1. Pretreatments used in this study showed to have a disrupting effect on the lignocellulosic biomass, making the treated materials accessible for enzymatic hydrolysis. The combination of presoaking inH2O2 before WAO pretreatment and enzymatic hydrolysis was found to give the highest sugar yield

The training and professional expectations of medical students in Angola, Guinea-Bissau and Mozambique

<p>Abstract</p> <p>Background</p> <p>The purpose of this paper is to describe and analyze the professional expectations of medical students during the 2007-2008 academic year at the public medical schools of Angola, Guinea-Bissau and Mozambique, and to identify their social and geographical origins, their professional expectations and difficulties relating to their education and professional future.</p> <p>Methods</p> <p>Data were collected through a standardised questionnaire applied to all medical students registered during the 2007-2008 academic year.</p> <p>Results</p> <p>Students decide to study medicine at an early age. Relatives and friends seem to have an especially important influence in encouraging, reinforcing and promoting the desire to be a doctor.</p> <p>The degree of feminization of the student population differs among the different countries.</p> <p>Although most medical students are from outside the capital cities, expectations of getting into medical school are already associated with migration from the periphery to the capital city, even before entering medical education.</p> <p>Academic performance is poor. This seems to be related to difficulties in accessing materials, finances and insufficient high school preparation.</p> <p>Medical students recognize the public sector demand but their expectations are to combine public sector practice with private work, in order to improve their earnings. Salary expectations of students vary between the three countries.</p> <p>Approximately 75% want to train as hospital specialists and to follow a hospital-based career. A significant proportion is unsure about their future area of specialization, which for many students is equated with migration to study abroad.</p> <p>Conclusions</p> <p>Medical education is an important national investment, but the returns obtained are not as efficient as expected. Investments in high-school preparation, tutoring, and infrastructure are likely to have a significant impact on the success rate of medical schools. Special attention should be given to the socialization of students and the role model status of their teachers.</p> <p>In countries with scarce medical resources, the hospital orientation of students' expectations is understandable, although it should be associated with the development of skills to coordinate hospital work with the network of peripheral facilities. Developing a local postgraduate training capacity for doctors might be an important strategy to help retain medical doctors in the home country.</p

Patients' values and preferences of the expected efficacy of hip arthroscopy for osteoarthritis : a protocol for a multinational structured interview-based study combined with a randomised survey on the optimal amount of information to elicit preferences

Peer reviewe