136 research outputs found
Assessment of the release of atomic Na from a burning black liquor droplet using quantitative PLIF
The quantitative measurement of atomic sodium (Na) release, at high concentration, from a burning
black liquor droplet has been demonstrated using a planar laser-induced fluorescence (PLIF) technique,
corrected for fluorescence trapping. The local temperature of the particle was measured to be approximately
1700 C, at a height of 10 mm above a flat flame burner. The PLIF technique was used to assess
the temporal release of atomic Na from the combustion of black liquor and compare it with the Na concentration
in the remaining smelt. A first-order model was made to provide insight using a simple Plug
Flow Reactor model based on the independently measured concentration of residual Na in the smelt as a
function of time. This model also required the dilution ratio of the combustion products in the flat flame
entrained into the plume gas from the black liquor particle to be estimated. The key findings of these
studies are: (i) the peak concentration of atomic Na from the combustion of the black liquor droplets
is around 1.4 ppm; (ii) very little atomic Na is present during the drying, devolatilisation or char combustion
stages; and (iii) the presence of atomic Na during smelt phase dominates over that from the other
combustion stages
Regional Paleoprecipitation Records from the Late Eocene and Oligocene of North America
Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/148635/1/Sheldon_and_Retallack_2004_JGeol-EOT_climate_spatial_gradients.pd
Global aridity during the Early Miocene? A Terrestrial Paleoclimate Record from the Ebro Basin, Spain
Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/148622/1/Hamer_et_al_2007_J_Geology-Miocene_climate.pd
Geochemical climofunctions from North America soils and application to paleosols across the Eocene-Oligocene boundary in Oregon
Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/148640/1/Sheldon_et_al_2002_JGeol-new_paleoclimate_proxies_and_applications_to_the_EOT.pd
Insights from a new method providing single-shot, planar measurement of gas-phase temperature in particle-laden flows under high-flux radiation
Published online: 31 March 2021Two-colour laser-induced fluorescence (LIF) of toluene has been demonstrated to provide in situ, spatially resolved, planar measurements of the gas-phase temperature in a particle-laden flow with strong radiative heating at fluxes up to 42.8 MW/m². Toluene was seeded in trace quantities into the gas flow laden with particles of mean diameter 173 μm at a volumetric loading sufficiently high for particle–fluid and particle–particle interactions to be significant. The particle number density was also measured simultaneously using Mie scattering. The two-colour LIF method was found to resolve temperature with a pixelto- pixel standard deviation of 17.8 °C for unheated measurements in this system despite significant attenuation of the probe laser and signal trapping of the fluorescence emissions from the densely loaded particles. Following heating of the particles using high flux radiation, the increase in the gas-phase temperature from convection was found to be spatially non-uniform with highly localised regions of temperature spanning from ambient to 150 °C. This gas-phase heating continued well downstream from the limits of the region with radiative heating, with the time-averaged gas temperature increasing with distance at up to 2,200 °C/m on the jet centreline. The temperature of the flow was non-symmetrical in the direction of the heating beam, because the particles attenuate the radiation through absorption and scattering. The addition of radiation at fluxes up to 42.8 MW/m² did not significantly change the particle number density distribution within the region investigated here.Elliott W. Lewis, Timothy C. W. Lau, Zhiwei Sun, Zeyad T. Alwahabi, Graham J. Natha
Soot structure and flow characteristics in turbulent non-premixed methane flames stabilised on a bluff-body
The soot properties of methane in turbulent regimes are not well characterised but are highly desirable. Methane is the main constituent of natural gas that is broadly used in many industrial combustors. Investigation of turbulent methane flames under well-defined boundary conditions is therefore useful for interpreting soot formation in practical burners and can be used for further model development. This study presents a joint experimental and numerical study of a series of turbulent non-premixed bluff-body flames fuelled with pure methane for three values of the momentum flux ratio of fuel jet to co-flowing air. Soot volume fraction (SVF) and flowfield are measured simultaneously using planar laser-induced incandescence (P-LII) and 2D-polarised particle image velocimetry (P-PIV). Additionally, time-averaged temperature, mixture fraction, OH and C2H2 concentrations are estimated numerically using RANS models. The global flame structure for all three flames features a recirculation zone with a double-vortex structure, a jet-propagating zone, and a neck zone connecting the two regions. The soot distribution within the recirculation zone shows clear distinct features, which is attributed to the mean mixture fraction distribution in this zone. Increasing the momentum flux ratio shifts the location of the mean stoichiometric mixture fraction to the rich inner vortex core, leading to a distinct peak of the total integrated soot in the inner vortex of the recirculation zone that is not observed in other cases. Also, it is deduced that the soot inception starts earlier in the recirculation zone for the flame with the highest momentum flux ratio and in the jet zone for the other two flames. Much higher soot concentration and lower intermittency are found with ethylene-based flames stabilised on the same burner and with the same operating conditions. In addition, the study has generated a database of soot and flowfield results, which can be helpful for future model validations.Amir Rowhani, Zhiwei Sun, Alfonso Chinnici, Paul R. Medwell, Graham J. Nathan, Bassam B. Dall
Low field vortex matter in YBCO: an atomic beam magnetic resonance study
We report measurements of the low field structure of the magnetic vortex
lattice in an untwinned YBCO single-crystal platelet. Measurements were carried
out using a novel atomic beam magnetic resonance (ABMR) technique. For a 10.7 G
field applied parallel to the c-axis of the sample, we find a triangular
lattice with orientational order extending across the entire sample. We find
the triangular lattice to be weakly distorted by the a-b anisotropy of the
material and measure a distortion factor, f = 1.16. Model-experiment
comparisons determine a penetration depth, lambda_ab = 140 (+-20) nm. The paper
includes the first detailed description of the ABMR technique. We discuss both
technical details of the experiment and the modeling used to interpret the
measurements.Comment: 44 pages, 13 figures, submitted to Phys. Rev. B Revision includes
Postscript wrapped figures + minor typo
Simultaneous multielement extraction with the Mehlich-1 solution for Southern Brazilian soils determined by ICP-OES and the effects on the nutrients recommendations to crops
- …