23 research outputs found
Estimation of High-Resolution Evapotranspiration in Heterogeneous Environments Using Drone-Based Remote Sensing
Evapotranspiration (ET) is a key element of hydrological cycle analysis, irrigation demand, and for better allocation of water resources in the ecosystem. For successful water resources management activities, precise estimate of ET is necessary. Although several attempts have been made to achieve that, variation in temporal and spatial scales constitutes a major challenge, particularly in heterogeneous canopy environments such as vineyards, orchards, and natural areas. The advent of remote sensing information from different platforms, particularly the small unmanned aerial systems (sUAS) technology with lightweight sensors allows users to capture high-resolution data faster than traditional methods, described as âflexible in timingâ. In this study, the Two Source Energy Balance Model (TSEB) along with high-resolution data from sUAS were used to bridge the gap in ET issues related to spatial and temporal scales. Over homogeneous vegetation surfaces, relatively low spatial resolution information derived from Landsat (e.g., 30 m) might be appropriate for ET estimate, which can capture differences between fields. However, in agricultural landscapes with presence of vegetation rows and interrows, the homogeneity is less likely to be met and the ideal conditions may be difficult to identify. For most agricultural settings, row spacing can vary within a field (vineyards and orchards), making the agricultural landscape less homogenous. This leads to a key question related to how the contextual spatial domain/model grid size could influence the estimation of surface fluxes in canopy environments such as vineyards. Furthermore, temporal upscaling of instantaneous ET at daily or longer time scales is of great practical importance in managing water resources. While remote sensing-based ET models are promising tools to estimate instantaneous ET, additional models are needed to scale up the estimated or modeled instantaneous ET to daily values. Reliable and precise daily ET (ETd) estimation is essential for growers and water resources managers to understand the diurnal and seasonal variation in ET. In response to this issue, different existing extrapolation/upscaling daily ET (ETd) models were assessed using eddy covariance (EC) and sUAS measurements. On the other hand, ET estimation over semi-arid naturally vegetated regions becomes an issue due to high heterogeneity in such environments where vegetation tends to be randomly distributed over the land surface. This reflects the conditions of natural vegetation in river corridors. While significant efforts were made to estimate ET at agricultural landscapes, accurate spatial information of ET over riparian ecosystems is still challenging due to various species associated with variable amounts of bare soil and surface water. To achieve this, the TSEB model with high-resolution remote sensing data from sUAS were used to characterize the spatial heterogeneity and calculate the ET over a natural environment that features arid climate and various vegetation types at the San Rafael River corridor
A System Approach For Defining Data Center Value Proposition
Organizations invest heavily in IT infrastructure and the data centerâs share of these investments is not marginal. Organizations face the challenge of justifying capital and operational spending on these facilities and often measuring the performance of data center is ignored. Performance measurements focus on analyzing the performance of servers and software applications rather than that of the impact of the data center on the organization. Various methods that have been currently used do not convey the actual value of the data center and do not provide accurate predications of its benefit and expected performance. This report introduces a method to define the value proposition of a data center using a set of metrics that provide measures for a number of variables that define the behavior and outcomes of a data center. An analysis of the data center behavior and outcome will provide a system model from which stakeholder value can be defined
Myomectomy for fibroids during cesarean section: A randomized controlled trial
Background: There is a considerable debate about the management of myoma during cesarean section (CS). Recently, several studies indicated the safety and feasibility of undertaking myomectomy during CS.Objectives: To evaluate the safety, accessibility, and short-term morbidity of myomectomy for fibroids during cesarean section.Patients and Methods: This was a randomized controlled trial that included 72 patients who were admitted to the Obstetrics & Gynecology Department, Menoufia University Hospital with uterine fibroids during pregnancy; who were randomly allocated equally into a group of cesarean myomectomy (CM; n=36) and another group of CS only (n=36). The operative events and the outcome were recorded and analyzed.Results: CM group showed a longer duration of surgery and longer hospital stay, higher amount of blood loss, and higher mean pain sores, with a highly statistically significant difference (p = 0.000). No cases in both groups required blood transfusion or ICU admission. No statistically significant differences were noted between both groups as regards the fetal outcome measures (p=0.583 & 0.601).Conclusion: CM is safe and applicable in selected cases without deleterious maternal complications. Special precautions ought to be paid during the procedure, particularly in the intramural type and with large fibroids
Effects of hospital facilities on patient outcomes after cancer surgery: an international, prospective, observational study
Background Early death after cancer surgery is higher in low-income and middle-income countries (LMICs) compared with in high-income countries, yet the impact of facility characteristics on early postoperative outcomes is unknown. The aim of this study was to examine the association between hospital infrastructure, resource availability, and processes on early outcomes after cancer surgery worldwide.Methods A multimethods analysis was performed as part of the GlobalSurg 3 study-a multicentre, international, prospective cohort study of patients who had surgery for breast, colorectal, or gastric cancer. The primary outcomes were 30-day mortality and 30-day major complication rates. Potentially beneficial hospital facilities were identified by variable selection to select those associated with 30-day mortality. Adjusted outcomes were determined using generalised estimating equations to account for patient characteristics and country-income group, with population stratification by hospital.Findings Between April 1, 2018, and April 23, 2019, facility-level data were collected for 9685 patients across 238 hospitals in 66 countries (91 hospitals in 20 high-income countries; 57 hospitals in 19 upper-middle-income countries; and 90 hospitals in 27 low-income to lower-middle-income countries). The availability of five hospital facilities was inversely associated with mortality: ultrasound, CT scanner, critical care unit, opioid analgesia, and oncologist. After adjustment for case-mix and country income group, hospitals with three or fewer of these facilities (62 hospitals, 1294 patients) had higher mortality compared with those with four or five (adjusted odds ratio [OR] 3.85 [95% CI 2.58-5.75]; p<0.0001), with excess mortality predominantly explained by a limited capacity to rescue following the development of major complications (63.0% vs 82.7%; OR 0.35 [0.23-0.53]; p<0.0001). Across LMICs, improvements in hospital facilities would prevent one to three deaths for every 100 patients undergoing surgery for cancer.Interpretation Hospitals with higher levels of infrastructure and resources have better outcomes after cancer surgery, independent of country income. Without urgent strengthening of hospital infrastructure and resources, the reductions in cancer-associated mortality associated with improved access will not be realised
Nurses' perceptions of aids and obstacles to the provision of optimal end of life care in ICU
Contains fulltext :
172380.pdf (publisher's version ) (Open Access
Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study
Summary
Background Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally.
Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies
have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of
the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income
countries globally, and identified factors associated with mortality.
Methods We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to
hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis,
exomphalos, anorectal malformation, and Hirschsprungâs disease. Recruitment was of consecutive patients for a
minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical
status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary
intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause,
in-hospital mortality for all conditions combined and each condition individually, stratified by country income status.
We did a complete case analysis.
Findings We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital
diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal
malformation, and 517 with Hirschsprungâs disease) from 264 hospitals (89 in high-income countries, 166 in middleincome
countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male.
Median gestational age at birth was 38 weeks (IQR 36â39) and median bodyweight at presentation was 2·8 kg (2·3â3·3).
Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income
countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups).
Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in lowincome
countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries;
pâ€0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients
combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88â4·11],
p<0·0001; middle-income vs high-income countries, 2·11 [1·59â2·79], p<0·0001), sepsis at presentation (1·20
[1·04â1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention
(ASA 4â5 vs ASA 1â2, 1·82 [1·40â2·35], p<0·0001; ASA 3 vs ASA 1â2, 1·58, [1·30â1·92], p<0·0001]), surgical safety
checklist not used (1·39 [1·02â1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed
(ventilation 1·96, [1·41â2·71], p=0·0001; parenteral nutrition 1·35, [1·05â1·74], p=0·018). Administration of
parenteral nutrition (0·61, [0·47â0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65
[0·50â0·86], p=0·0024) or percutaneous central line (0·69 [0·48â1·00], p=0·049) were associated with lower mortality.
Interpretation Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between lowincome,
middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will
be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger
than 5 years by 2030
Universal Dental Adhesives: Cost-Effectiveness and Duration of Use
The purpose of this study was to conduct a cost-effectiveness analysis (CEA) of different brands of universal dental adhesives used for composite restorations. Four adhesive brands were included: Single-Bond Universal (SB), Tetric N-Bond Universal VivaPen (TN), OptiBond All-In-One (OB), and G-Premio Bond (GP). Adhesives were applied 5 times daily in a standardized class II cavity onto a plastic tooth. A precision-analysis scale was used to measure all of the following parameters before and after use: adhesive bottle, applicator, dosing plate, and plastic tooth. CEA was done by measuring the amount of material utilized/day, waste/day, efficacy, efficiency, average cost-effectiveness ratio (ACER), and incremental cost-effectiveness ratio (ICER). Data were analyzed using Kruskal–Wallis and Dunn’s tests with Bonferroni correction at 0.05 significance level. CEA tested parameters were significantly different between groups (p < 0.001) except for ICER (p = 0.112). GP was the least effective (median = 0.062), and SB was the least efficient (median = 0.366). The highest and lowest ACER values were associated with TN (median cost ≈ USD 317) and SB (median cost ≈ USD 317), respectively. ICER analysis reported an incremental cost for extra material utilized per milliliter of ≈USD 208 for TN, USD 3.8 for GP, and USD −38 for OB, compared to SB. TN seems to be the most efficient and cost-effective dental adhesive
Universal Dental Adhesives: Cost-Effectiveness and Duration of Use
The purpose of this study was to conduct a cost-effectiveness analysis (CEA) of different brands of universal dental adhesives used for composite restorations. Four adhesive brands were included: Single-Bond Universal (SB), Tetric N-Bond Universal VivaPen (TN), OptiBond All-In-One (OB), and G-Premio Bond (GP). Adhesives were applied 5 times daily in a standardized class II cavity onto a plastic tooth. A precision-analysis scale was used to measure all of the following parameters before and after use: adhesive bottle, applicator, dosing plate, and plastic tooth. CEA was done by measuring the amount of material utilized/day, waste/day, efficacy, efficiency, average cost-effectiveness ratio (ACER), and incremental cost-effectiveness ratio (ICER). Data were analyzed using KruskalâWallis and Dunnâs tests with Bonferroni correction at 0.05 significance level. CEA tested parameters were significantly different between groups (p p = 0.112). GP was the least effective (median = 0.062), and SB was the least efficient (median = 0.366). The highest and lowest ACER values were associated with TN (median cost â USD 317) and SB (median cost â USD 317), respectively. ICER analysis reported an incremental cost for extra material utilized per milliliter of âUSD 208 for TN, USD 3.8 for GP, and USD â38 for OB, compared to SB. TN seems to be the most efficient and cost-effective dental adhesive
Water productivity of barley crop under laser land leveling technique and minimum tillage
ABSTRACTLaser land leveling is an important method that helps to improve the spatial distribution of irrigation water and fertilizers applications, subsequently reduce water, nutrient, and energy inputs to agriculture and contributes to increasing productivity. Thus, the aim of the study was to improve the productivity of the barley crop grown in sandy lands under conditions of water scarcity and the negative impact of climate change in Egypt by using laser leveling and the minimum tillage method. Two experiments were conducted during the 2020/2021 and 2021/2022 seasons at the Nubariya farm, Buhaira Governorate, Egypt to study the effects of laser leveling and minimum tillage (zero â tillage, 10âcm, 20âcm, and 30âcm) affecting the distribution of soil moisture, water stress, effectiveness of water application, yield characteristics, water productivity, and some quality parameters of the barley crop. The statistical analysisâ findings revealed a considerable influence of both laser soil leveling and minimum depth of plowing on productivity, water productivity and quality properties of barley crop. Laser leveling with a plowing depth of 10âcm gave the most favorable values of the soil moisture content at the root-zone as well as better grain yield and water productivity in addition to improve the quality properties of barley. The grain yield has improved by 12.65% and 10.41%, while water productivity has increased by 12.75% and 10.06% during the seasons 2020/2021 and 2021/2022, respectively. This increase is likely the result of improving soil moisture distribution and increasing irrigation application efficiency, which resulted in less water stress in the root zone and subsequently increased yield, water productivity and quality properties of barley during the two growing seasons. Generally, the application of laser land leveling as eco-friendly practice will help in sustaining barley productivity in Egypt particularly in the sandy soil regions. According to this study, laser-assisted precision field leveling has the potential to improve grain yield and crop establishment, water productivity and barley quality properties in addition to achievement of the highest net income for farmers