5 research outputs found
CO2 sequestration using brine impacted fly ash
>Magister Scientiae - MScCoal combustion accounts for over 40 % of the world's energy production and this figure is projected to increase with increasing human population and industrialization. The combustion of coal leads to the generation of waste products such as fly ash (FA), brine from water treatment, bottom ash, slag, flue gas desulphurization products (FGD) and gas emissions such as N20, and C02. The emissions contribute to air pollution and global warming, while FA, brines, and FGD are possible soil and water pollutants. In order to minimize the environmental impact of coal combustion, mitigation of the effects of coal burning processes such as the waste products (FA, brine, bottom ash, slag and FGD) and gas emissions is required. This study investigated utilization of the Secunda FA (class F) and reverse osmosis (RO) Tutuka brine to
sequester C02 in an attempt to make coal power production more environmentally sustainable. It was hypothesized that South African FA and brine could sequester C02 through mineral carbonation. A statistical approach was undertaken to optimize the % CaC03 formed from FAlbrine/C02 interaction with input parameters of temperature, pressure, particle size and solid/liquid ratio (S/L) being varied. The ranges adopted for the input parameters were: temperature of 30°C or 90 °C; pressure of 1 Mpa or 4 Mpa; four particle sizes namely bulk ash, > 150 11m, < 20 11m and 20 urn- 150 11m particle size range; S/L ratios ofO.1, 0.5 or 1. The FA! brine dispersions were carbonated in a high pressure reactor varying the above mentioned input parameters. The fresh Secunda FA of various size fractions was characterized morphologically
using scanning electron microscopy, chemically using X-ray fluorescence and mineralogically using qualitative X-ray diffraction. The carbonated solid residues on the other hand were characterized using quantitative X-ray diffraction, scanning electron microscopy, thermal gravimetic analysis and Chittick tests. The raw brine from Tutuka together with the carbonation leachates were characterized using inductively coupled mass spectrometry and ion chromatography. Total acid digestion was carried out to evaluate the differences in the total elemental content in both the fresh ash and the carbonated solid residues. The results suggested that South African FA from Secunda belongs to class F based on the CaO content as well as the total alumina, silica and ferric oxide content, while the RO brine from Tutuka were classified as NaS04 waters. Mineral carbonation occurred and ranged between 2.75 % and 6.5 % of CaC03 depending on the input parameters. Two polymorphs of CaC03 were identified in the carbonated residues i.e. calcite and aragonite. The carbonated ash/brine leachates were cleaner with respect to major and trace element concentration compared to raw brine thus the carbonation process could
be used to improve the quality of brines generated in the power industry. Removal of the major elements from brine was as follows Ca-74.8 %, Na- 28.7 %, Mg- 98 %, K- 82.9 %, S04- 20.8 %. Hundred percent removal was observed for traces of Fe, Al, Mn, Cu, Zn, Pb, Ni, As, Ti, Sr, Se, Si and N03. However Mo, V, B, and Cl concentrations increased by 72.5 %, 94 %,48.2 % and 7.2 % respectively after carbonation at 90°C, 4 Mpa, S/L ratio of 1 using the bulk ash. The parameters found to be of most significance in the carbonation process were the main effects of temperature, particle size and S/L ratio while the interactions of temperature and particle size as well as the interaction of temperature with S/L ratio were also found to be significant. The statistical approach led to a clear understanding of the effect of each input parameter as well as the ansmg interactions. The conditions of 90°C, 4 Mpa, using bulk ash at a S/L ratio of 1 resulted in the highest yield of % CaC03 with a value of 6.5 %. Theoretically one ton of Secunda FA containing 9.2 % of CaO could sequester 0.083 tons of C02. With the optimized protocol developed in this study bearing in mind that the carbonation efficiency is 75.54%, 1 ton of Secunda FA could sequester 0.062 tons of CO2. This translates to 0.65 % of CO2 produced annually at Secunda plant being sequestered in the FAlbrine dispersions. In other words, 16
tons of FA are required to sequester a ton of C02 annually. It was also observed that carbonation using brine resulted in higher carbonation
efficiency than carbonation using water as the Ca2+ component in the brine contributed towards the Ca 2+concentration
CO2 sequestration using brine impacted fly fish
Magister Scientiae - MScIt was hypothesized that South African FA and brine could sequester CO2 through mineral carbonation. A statistical approach was undertaken to optimize the % CaCO3 formed from FA/brine/CO2 interaction with input parameters of temperature, pressure, particle size and solid/liquid ratio (S/L) being varied. The ranges adopted for the input parameters were: temperature of 30 ºC or 90 ºC; pressure of 1 Mpa or 4 Mpa; four particle sizes namely bulk ash, > 150 μm, < 20 μm and 20 μm- 150 μm particle size range; S/L ratios of 0.1, 0.5 or 1. The FA/ brine dispersions were carbonated in a high pressure reactor varying the above mentioned input parameters. The fresh Secunda FA of various size fractions was characterized morphologically using scanning electron microscopy, chemically using X-ray fluorescence and mineralogically using qualitative X-ray diffraction. The carbonated solid residues on the other hand were characterized using quantitative X-ray diffraction, scanning electron microscopy, thermal gravimetic analysis and Chittick tests. The raw brine from Tutuka together with the carbonation leachates were characterized using inductively coupled mass spectrometry and ion chromatography. Total acid digestion was carried out to evaluate the differences in the total elemental content in both the fresh ash and the carbonated solid residues. The results suggested that South African FA from Secunda belongs to class F based on the CaO content as well as the total alumina, silica and ferric oxide content, while the RO brine from Tutuka were classified as NaSO4 waters.South Afric
Re-use of South African fly ash for CO2 capture and brine remediation.
Philosophiae Doctor - PhDCoal combustion accounts for 95% of electricity generation in South Africa while globally coal combustion for energy generation stands at 42%. It has been predicted that coal utilization for energy generation will continue due to its low cost and availability in huge quantities in different parts of the world. Additionally brine and gaseous emissions are produced in the power generation and coal combustion processes. In fact, it has been established that CO2 emissions from power plants are the main cause of the green-house effect leading to global
warming. Mitigation of the effects of disposal of fly ash, brine and CO2 emissions is critical for sustainable energy generation from coal and environmental protection. The study investigated whether South African coal fly ash could be used for brine remediation and CO2 capture using fly ash based hydrotalcites and zeolites. Four main objectives were investigated. These were; firstly, to compare the natural CO2
capture potential of a power station ash dam with an accelerated ex-situ mineral carbonation process. Secondly, to probe the effect of accelerated ex-situ mineral carbonation on brine quality with regards to major, minor and trace elements concentration. Furthermore, the study investigated the feasibility of synthesizing hydrotalcites from fly ash by optimizing the synthesis parameters such as acid
concentration, aging time, aging temperature, pH during aging, crystallization time and crystallization temperature. Finally the study compared the CO2 adsorption capacities of the fly ash based hydrotalcites with fly ash based zeolites NaA, and NaX. The natural carbonation potential of the wet disposed ash dam at Secunda was investigated by coring a 20 year old dam. Three cores (SI, S2 and S3) were obtained by air flush coring the dam along a geophysical line and establishing the geophysical profile of the three cores. The surface of the three cores was of medium resistivity with values between 9.3 and 12.2 nm while the midsections were of low resistivity with values ranging between 4 and 7 nm. The base section of core SI had a resistivity of 28.3 nm, that of S2 was between 16.2 and 21.4 nm and that of S3 between 12.2 and 16.2 nm; implying that SI had the lowest salt load while S3 had the highest salt content. Moisture content was observed to be high deeper down the profiles of S2 and S3 with samples appearing water logged while SI had the highest moisture content at the surface showing the
inhomogeneity of the ash dam. The morphology of fresh fly ash taken from the ash collection hoppers at Secunda was observed to be spherical. Weathered ash from the ash dam showed irregularly agglomerated particles while accelerated ex-situ mineral carbonation resulted in the formation of acicular particles of calcite. Fresh ash, weathered ash and the accelerated carbonated ash were all class F with a sum total of silica, alumina and iron oxide totaling more than 70%. A reduction in silica and alumina content with instability of fly ash. Dumping of spent iron catalyst (resulting from the petrochemical operations as Sasol) on the ash dam led to an increase in Fe203 content of the weathered ash. Enrichment of Nb, Sr, Y, Th, Na, Cl, S04, K and S with natural carbonation as well as during accelerated ex-situ mineral carbonation was observed and was due to the contact of ash with brine during these two processes. Reduction of Zr, Rb, Pb, Ni, Co and V content of ash was observed with weathering. Mineralogically, all the ash samples had main phases of mullite, quartz, magnetite and hematite, with weathered and accelerated carbonated ash having additional phases of calcite. The aluminosilicious nature of the three ashes was identified by structural evaluation using Fourier transform infrared analysis which revealed that, bands associated with C-O in-plane and out of plane bending of carbonates was only visible in weathered and carbonated ash