Sputter Deposited Magnetostrictive Layers for SAW Magnetic Field Sensors

For the best possible limit of detection of any thin film-based magnetic field sensor, the functional magnetic film properties are an essential parameter. For sensors based on magnetostrictive layers, the chemical composition, morphology and intrinsic stresses of the layer have to be controlled during film deposition to further control magnetic influences such as crystallographic effects, pinning effects and stress anisotropies. For the application in magnetic surface acoustic wave sensors, the magnetostrictive layers are deposited on rotated piezoelectric single crystal substrates. The thermomechanical properties of quartz can lead to undesirable layer stresses and associated magnetic anisotropies if the temperature increases during deposition. With this in mind, we compare amorphous, magnetostrictive FeCoSiB films prepared by RF and DC magnetron sputter deposition. The chemical, structural and magnetic properties determined by elastic recoil detection, X-ray diffraction, and magneto-optical magnetometry and magnetic domain analysis are correlated with the resulting surface acoustic wave sensor properties such as phase noise level and limit of detection. To confirm the material properties, SAW sensors with magnetostrictive layers deposited with RF and DC deposition have been prepared and characterized, showing comparable detection limits below 200 pT/Hz1/2 at 10 Hz. The main benefit of the DC deposition is achieving higher deposition rates while maintaining similar low substrate temperatures

A comparative compositional study of Egyptian glass from Amarna with regard to cobalt sources and other colourants

A selection of Late Bronze Age glass objects from the site of Amarna (Egypt) was analysed for their overall chemical composition, colourants and transition metals associated with the sources of cobalt ore. The objects were analysed by means of Particle Induced X-Ray and Gamma-ray Emission and Rutherford Backscattering Spectrometry at the IBC, HZDR, Dresden and the New AGLAE facility, C2RMF, Paris. The data was subsequently compared with further measurements obtained by portable X-Ray Fluorescence (and by Laser-Ablation Inductively-Coupled-Plasma Mass-Spectrometry) in order to sound the potential of these non-destructive methods to obtain new insights into the production process of glass from Amarna and its provenancing

The resonance triplet at E_alpha = 4.5 MeV in the 40Ca(alpha,gamma)44Ti reaction

The 40Ca(alpha,gamma)44Ti reaction is believed to be the main production channel for the radioactive nuclide 44Ti in core-collapse supernovae. Radiation from decaying 44Ti has been observed so far for two supernova remnants, and a precise knowledge of the 44Ti production rate may help improve supernova models. The 40Ca(alpha,gamma)44Ti astrophysical reaction rate is determined by a number of narrow resonances. Here, the resonance triplet at E_alpha = 4497, 4510, and 4523 keV is studied both by activation, using an underground laboratory for the gamma counting, and by in-beam gamma spectrometry. The target properties are determined by elastic recoil detection analysis and by nuclear reactions. The strengths of the three resonances are determined to omega gamma = (0.92+-0.20), (6.2+-0.5), and (1.32+-0.24) eV, respectively, a factor of two more precise than before. The strengths of this resonance triplet may be used in future works as a point of reference. In addition, the present new data directly affect the astrophysical reaction rate at relatively high temperatures, above 3.5 GK.Comment: 12 pages, 11 figures; submitted to Phys. Rev.

Advancements in the fabrication and characterization of actinide targets for superheavy element production

The heaviest elements can exclusively be produced in actinide-target based nuclear fusion reactions with intense heavy-ion beams. Ever more powerful accelerators deliver beams of continuously increasing intensity, which brings targets of current technology to their limits and beyond. We motivate efforts to produce targets with improved properties, which calls for a better understanding of targets produced by molecular plating, the current standard method. Complementary analytical methods will help shedding more light on their chemical and physical changes in the beam. Special emphasis is devoted to the aspect of the optimum target thickness and the choice of the backing material