2,967 research outputs found
A Low-Voltage Electronically Tunable MOSFET-C Voltage-Mode First-Order All-Pass Filter Design
This paper presents a simple electronically tunable voltage-mode first-order all-pass filter realization with MOSFET-C technique. In comparison to the classical MOSFET-C filter circuits that employ active elements including large number of transistors the proposed circuit is only composed of a single two n-channel MOSFET-based inverting voltage buffer, three passive components, and one NMOS-based voltage-controlled resistor, which is with advantage used to electronically control the pole frequency of the filter in range 103 kHz to 18.3 MHz. The proposed filter is also very suitable for low-voltage operation, since between its supply rails it uses only two MOSFETs. In the paper the effect of load is investigated. In addition, in order to suppress the effect of non-zero output resistance of the inverting voltage buffer, two compensation techniques are also introduced. The theoretical results are verified by SPICE simulations using PTM 90 nm level-7 CMOS process BSIM3v3 parameters, where +/- 0.45 V supply voltages are used. Moreover, the behavior of the proposed filter was also experimentally measured using readily available array transistors CD4007UB by Texas Instruments
Supplementary Inductance Simulator Topologies Employing Single DXCCII
In this study, six grounded inductance simulator circuits are presented including additional useful features in comparison to previous dual-X current conveyor (DXCCII) based implementations. To demonstrate the performance and usefulness of the presented circuits, one of them is used to construct a fifth order Butterworth high-pass filter and a current-mode multifunction filter as application examples. Simulation results are given to confirm the theoretical analysis. The derived DXCCII and its applications are simulated using CMOS 0.35 μm technology
DCCII-Based Novel Lossless Grounded Inductance Simulators With No Element Matching Constrains
In 1996, the differential current conveyor (DCCII) was introduced as a versatile active element with current differencing capability. Therefore, in this study, the usefulness of the DCCII is shown on six novel lossless grounded inductance simulator circuits. Proposed circuits simultaneously employ minimum number of elements, i.e. single DCCII, one capacitor, and two resistors. No passive element matching restriction is needed and all solutions are electronically tunable in case that one of resistors is replaced by MOSFET-based voltage-controlled resistor. The internal structure of the active element has been implemented using the TSMC 0.25 um SCN025 CMOS process BSIM3v3.1 parameters. Firstly, the performance of the selected inductor simulator is evaluated and subsequently verified in the design of 5th-order high-pass ladder and 2nd-order frequency filters. In addition, experimental results using commercially available AD844/ADs are given to verify the theoretical analysis and SPICE simulations
Realization of Resistorless Lossless Positive and Negative Grounded Inductor Simulators Using Single ZC-CCCITA
This paper is in continuation with the very recent work of Prasad et al. [14], wherein new realizations of grounded and floating positive inductor simulator using current differencing transconductance amplifier (CDTA) are reported. The focus of the paper is to provide alternate realizations of lossless, both positive and negative inductor simulators (PIS and NIS) in grounded form using z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), which can be considered as a derivative of CDTA, wherein the current differencing unit (CDU) is reduced to a current-controlled current inverting unit. We demonstrate that only a single ZC-CCCITA and one grounded capacitor are sufficient to realize grounded lossless PIS or NIS. The proposed circuits are resistorless whose parameters can be controlled through the bias currents. The workability of the proposed PIS is validated by SPICE simulations on three RLC prototypes
Boundary Value Problems For Integrable Equations Compatible With The Symmetry Algebra
Boundary value problems for integrable nonlinear partial differential
equations are considered from the symmetry point of view. Families of boundary
conditions compatible with the Harry-Dym, KdV and MKdV equations and the
Volterra chain are discussed. We also discuss the uniqueness of some of these
boundary conditions.Comment: 25 pages , Latex , no figure
Godel-type Metrics in Various Dimensions II: Inclusion of a Dilaton Field
This is the continuation of an earlier work where Godel-type metrics were
defined and used for producing new solutions in various dimensions. Here a
simplifying technical assumption is relaxed which, among other things,
basically amounts to introducing a dilaton field to the models considered. It
is explicitly shown that the conformally transformed Godel-type metrics can be
used in solving a rather general class of Einstein-Maxwell-dilaton-3-form field
theories in D >= 6 dimensions. All field equations can be reduced to a simple
"Maxwell equation" in the relevant (D-1)-dimensional Riemannian background due
to a neat construction that relates the matter fields. These tools are then
used in obtaining exact solutions to the bosonic parts of various supergravity
theories. It is shown that there is a wide range of suitable backgrounds that
can be used in producing solutions. For the specific case of (D-1)-dimensional
trivially flat Riemannian backgrounds, the D-dimensional generalizations of the
well known Majumdar-Papapetrou metrics of general relativity arise naturally.Comment: REVTeX4, 17 pp., no figures, a few clarifying remarks added and
grammatical errors correcte
Hydrodynamic type integrable equations on a segment and a half-line
The concept of integrable boundary conditions is applied to hydrodynamic type
systems. Examples of such boundary conditions for dispersionless Toda systems
are obtained. The close relation of integrable boundary conditions with
integrable reductions of multi-field systems is observed. The problem of
consistency of boundary conditions with the Hamiltonian formulation is
discussed. Examples of Hamiltonian integrable hydrodynamic type systems on a
segment and a semi-line are presented
Performance and health of dairy calves fed limited amounts of acidified milk replacer
To compare growth performance of Brown Swiss calves fed acidified milk replacer (AMR) at 8% of birth weight, 20 newborn calves were reared under a new calf-feeding programme. Body weights, total weight gains and gains in body measurements, feed intake and feed efficiency values determined at different stages of growth of AMR-fed calves were comparable to those of calves fed sweet milk replacer (SMR). Faecal consistency scores and percent days with diarrhoea of calves offered AMR from four to 35 days of age were respectively 0.4 and 19.1% lower than those fed SMR. Most of the behavioural parameters studied were not unfavourably influenced by acidification of the replacer. In conclusion, growth, feed intake and feed efficiency characteristics of Brown Swiss calves fed AMR or SMR were not different from each other. However, incidence of diarrhoea of the young calves was decreased and health status of the calves was improved with the feeding of acidified milk. South African Journal of Animal Science Vol. 36(3) 2006: 149-15
D-DSC: Decoding Delay-based Distributed Source Coding for Internet of Sensing Things.
Spatial correlation between densely deployed sensor nodes in a wireless sensor network (WSN) can be exploited to reduce the power consumption through a proper source coding mechanism such as distributed source coding (DSC). In this paper, we propose the Decoding Delay-based Distributed Source Coding (D-DSC) to improve the energy efficiency of the classical DSC by employing the decoding delay concept which enables the use of the maximum correlated portion of sensor samples during the event estimation. In D-DSC, network is partitioned into clusters, where the clusterheads communicate their uncompressed samples carrying the side information, and the cluster members send their compressed samples. Sink performs joint decoding of the compressed and uncompressed samples and then reconstructs the event signal using the decoded sensor readings. Based on the observed degree of the correlation among sensor samples, the sink dynamically updates and broadcasts the varying compression rates back to the sensor nodes. Simulation results for the performance evaluation reveal that D-DSC can achieve reliable and energy-efficient event communication and estimation for practical signal detection/estimation applications having massive number of sensors towards the realization of Internet of Sensing Things (IoST)
- …