Refusing to Endorse. A must Explanation for Pejoratives.

In her analysis of pejoratives, Eva Picardi rejects a too sharp separation between descriptive and expressive content. I reconstruct some of her arguments, endorsing Eva’s criticism of Williamson’s analysis of Dummett and developing a suggestion by Manuel Garcia Carpintero on a speech act analysis of pejoratives. Eva’s main concern is accounting for our instinctive refusal to endorse an assertion containing pejoratives because it suggests a picture of reality we do not share. Her stance might be further developed claiming that uses of pejoratives not only suggest, but also promote a wrong picture of reality. Our refusal to endorse implies rejecting not only a wrong picture of reality but also a call for participation to what that picture promotes

Utilization of the Building-Block Approach in Structural Mechanics Research

In the last 20 years NASA has worked in collaboration with industry to develop enabling technologies needed to make aircraft safer and more affordable, extend their lifetime, improve their reliability, better understand their behavior, and reduce their weight. To support these efforts, research programs starting with ideas and culminating in full-scale structural testing were conducted at the NASA Langley Research Center. Each program contained development efforts that (a) started with selecting the material system and manufacturing approach; (b) moved on to experimentation and analysis of small samples to characterize the system and quantify behavior in the presence of defects like damage and imperfections; (c) progressed on to examining larger structures to examine buckling behavior, combined loadings, and built-up structures; and (d) finally moved to complicated subcomponents and full-scale components. Each step along the way was supported by detailed analysis, including tool development, to prove that the behavior of these structures was well-understood and predictable. This approach for developing technology became known as the "building-block" approach. In the Advanced Composites Technology Program and the High Speed Research Program the building-block approach was used to develop a true understanding of the response of the structures involved through experimentation and analysis. The philosophy that if the structural response couldn't be accurately predicted, it wasn't really understood, was critical to the progression of these programs. To this end, analytical techniques including closed-form and finite elements were employed and experimentation used to verify assumptions at each step along the way. This paper presents a discussion of the utilization of the building-block approach described previously in structural mechanics research and development programs at NASA Langley Research Center. Specific examples that illustrate the use of this approach are included from recent research and development programs for both subsonic and supersonic transports

Detection statistics in the micromaser

We present a general method for the derivation of various statistical quantities describing the detection of a beam of atoms emerging from a micromaser. The user of non-normalized conditioned density operators and a linear master equation for the dynamics between detection events is discussed as are the counting statistics, sequence statistics, and waiting time statistics. In particular, we derive expressions for the mean number of successive detections of atoms in one of any two orthogonal states of the two-level atom. We also derive expressions for the mean waiting times between detections. We show that the mean waiting times between de- tections of atoms in like states are equivalent to the mean waiting times calculated from the uncorrelated steady state detection rates, though like atoms are indeed correlated. The mean waiting times between detections of atoms in unlike states exhibit correlations. We evaluate the expressions for various detector efficiencies using numerical integration, reporting re- sults for the standard micromaser arrangement in which the cavity is pumped by excited atoms and the excitation levels of the emerging atoms are measured. In addition, the atomic inversion and the Fano-Mandel function for the detection of de-excited atoms is calculated for compari- son to the recent experimental results of Weidinger et al. [1], which reports the first observation of trapping states.Comment: 26 pages, 11 figure

Investigation of glucagon-like peptide-1 response to six oral carbohydrates in ponies

Glucagon-like peptide-1 (GLP-1), the principal incretin in horses, may play a role in the pathophysiology of insulin dysregulation (ID). This study aimed to describe its concentration in response to three preserved forages and four dynamic tests for ID in ponies. Twelve adult ponies of mixed ID status were given a meal of hay, soaked hay or haylage, an in-feed oral glucose test (OGT), oral sugar test (OST), an oral test using a proprietary breakfast cereal (WEET) or a combined glucose-insulin tolerance test (CGIT) weekly in a randomised cross-over study. Glucose, insulin and GLP-1 concentrations were measured before and following each intervention. Ponies were designated ID or non-ID and insulin resistant (IR) or non-IR according to OGT and CGIT results, respectively. All interventions apart from the CGIT provoked a GLP-1 response within 30 min. The OGT and WEET interventions, (containing the greatest dose of non-structural carbohydrate, 1.06 and 1 g/kg BW, respectively), resulted in a greater area under the curve (AUC) for GLP-1 compared to all other interventions (P &lt; 0.001). No difference in GLP-1 response was detected according to ID or IR status, despite there being strong positive correlations (rs [95 % CI]) between GLP-1 and insulin concentrations measured at individual time points (0.67 [0.62 – 0.71]; P &lt; 0.001) and as AUC (0.66 [0.49–0.79], P &lt; 0.001). These data do not support of the use of GLP-1 as an adjunctive diagnostic test for ID or IR, as defined by conventional intravenous or oral dynamic tests.</p

Μοντέλο εμπιστοσύνης για τα κοινωνικά δίκτυα

Key components of female fertility in tropically adapted beef breeds are age at puberty and interval from calving to conception. Presence of an ovarian corpus luteum or stage of pregnancy were recorded using trans-rectal ultrasonography in 4649 heifers and 2925 first-lactation cows in seven herds of either Brahman, Droughtmaster or Santa Gertrudis tropical beef cattle breeds in northern Australia. The traits derived from a single ultrasonographic examination were incidence of corpus luteum at similar to 600 days of age in heifers, and weeks pregnant 5 weeks post-mating in heifers at similar to 2.5 years of age and in first-lactation cows at either 2.5 or 3.5 years of age. At 600 days of age, the bodyweight of heifers averaged 340 kg and 40% had a corpus luteum. At 2.5 years of age bodyweight of heifers averaged 452 kg and 80% were pregnant. First-lactation cows averaged 473 kg and 64% were pregnant. Considerable between-herd variation in traits reflected differences in climate and management at each site. However, estimates of heritability of incidence of corpus luteum at 600 days (0.18-0.32) and weeks pregnant in lactating cows (0.11-0.20) suggested that a significant proportion of the variation was due to additive gene action. Small to moderate genetic correlations with other economically important traits and the range in estimated breeding values indicate substantial opportunity for genetic improvement of the traits. The study provided evidence to accept the hypothesis that strategically timed ultrasound examinations can be adopted to derive useful traits for genetic evaluation

New ophthalmosaurid ichthyosaurs from the European lower cretaceous demonstrate extensive ichthyosaur survival across the Jurassic–Cretaceous boundary

Background Ichthyosauria is a diverse clade of marine amniotes that spanned most of the Mesozoic. Until recently, most authors interpreted the fossil record as showing that three major extinction events affected this group during its history: one during the latest Triassic, one at the Jurassic–Cretaceous boundary (JCB), and one (resulting in total extinction) at the Cenomanian-Turonian boundary. The JCB was believed to eradicate most of the peculiar morphotypes found in the Late Jurassic, in favor of apparently less specialized forms in the Cretaceous. However, the record of ichthyosaurs from the Berriasian–Barremian interval is extremely limited, and the effects of the end-Jurassic extinction event on ichthyosaurs remains poorly understood. Methodology/Principal Findings Based on new material from the Hauterivian of England and Germany and on abundant material from the Cambridge Greensand Formation, we name a new ophthalmosaurid, Acamptonectes densus gen. et sp. nov. This taxon shares numerous features with Ophthalmosaurus, a genus now restricted to the Callovian–Berriasian interval. Our phylogenetic analysis indicates that Ophthalmosauridae diverged early in its history into two markedly distinct clades, Ophthalmosaurinae and Platypterygiinae, both of which cross the JCB and persist to the late Albian at least. To evaluate the effect of the JCB extinction event on ichthyosaurs, we calculated cladogenesis, extinction, and survival rates for each stage of the Oxfordian–Barremian interval, under different scenarios. The extinction rate during the JCB never surpasses the background extinction rate for the Oxfordian–Barremian interval and the JCB records one of the highest survival rates of the interval. Conclusions/Significance There is currently no evidence that ichthyosaurs were affected by the JCB extinction event, in contrast to many other marine groups. Ophthalmosaurid ichthyosaurs remained diverse from their rapid radiation in the Middle Jurassic to their total extinction at the beginning of the Late Cretaceous

The ROTSE-III Robotic Telescope System

The observation of a prompt optical flash from GRB990123 convincingly demonstrated the value of autonomous robotic telescope systems. Pursuing a program of rapid follow-up observations of gamma-ray bursts, the Robotic Optical Transient Search Experiment (ROTSE) has developed a next-generation instrument, ROTSE-III, that will continue the search for fast optical transients. The entire system was designed as an economical robotic facility to be installed at remote sites throughout the world. There are seven major system components: optics, optical tube assembly, CCD camera, telescope mount, enclosure, environmental sensing & protection and data acquisition. Each is described in turn in the hope that the techniques developed here will be useful in similar contexts elsewhere.Comment: 19 pages, including 4 figures. To be published in PASP in January, 2003. PASP Number IP02-11