457 research outputs found

    Unimpaired Neuropsychological Performance and Enhanced Memory Recall in Patients with Sbma: A Large Sample Comparative Study.

    Get PDF
    Peculiar cognitive profile of patients with SBMA has been described by fragmented literature. Our retrospective study reports the neuropsychological evaluations of a large cohort of patients in order to contribute towards the understanding of this field. We consider 64 neuropsychological evaluations assessing mnesic, linguistic and executive functions collected from 2013 to 2015 in patients attending at Motor Neuron Disease Centre of University of Padova. The battery consisted in: Digit Span forwards and backwards, Prose Memory test, Phonemic Verbal fluency and Trail making tests. ANCOVA statistics were employed to compare tests scores results with those obtained from a sample of healthy control subjects. Multiple linear regressions were used to study the effect on cognitive performance of CAG-repeat expansion, the degree of androgen insensitivity and their interaction to cognitive performance. Statistical analyses did not reveal altered scores in any neuropsychological tests among those adopted. Interestingly, patients performed significantly better in the Prose Memory test's score. No relevant associations were found with genetic, hormonal or clinical patients' profile. Results inconsistent with previous studies have been interpreted according to the phenomenon of somatic mosaicism. We suggest a testosterone-related and the mood state-dependant perspectives as two possible interpretations of the enhanced performances in the Prose Memory test. Further studies employing more datailed tests batteries are encouraged

    Validation of landslide hazard assessment by means of GPS monitoring technique ? a case study in the Dolomites (Eastern Alps, Italy)

    Get PDF
    International audienceIn the last years a research project aimed at the assessment of the landslide hazard and susceptibility in the high Cordevole river basin (Eastern Dolomites, Italy) have been carried out. The hazard map was made adopting the Swiss Confederation semi-deterministic approach that takes into account parameters such as velocity, geometry and frequency of landslides. Usually these parameters are collected by means of geological and morphological surveys, historical archive researches, aerophotogrammetric analysis etc. In this framework however the dynamics of an instable slope can be difficult to determine. This work aims at illustrating some progress in landslide hazard assessment using a modified version of the Swiss Confederation semi-deterministic approach in which the values of some parameters have been refined in order to accomplish more reliable results in hazard assessment. A validation of the accuracy of these new values, using GPS and inclinometric measurements, has been carried out on a test site located inside the high Cordevole river basin

    Evaluation of seismic effects on the landslide deposits of Monte Salta (Eastern Italian Alps) using distinct element method

    No full text
    International audienceThe aim of the paper is to present the modelling of the ground effects of seismic waves on a large debris deposit lying on a steep mountain slope, with particular attention paid to the potential triggering of slope movements. The study site is a mass of 2.5 million m3 rock fall deposit, named "Monte Salta Landslide", located on the northern slope of the Vajont valley, at the border between Veneto and Friuli Venezia Giulia regions in north-eastern Italy. Several historical landslide events were reported in the area in the past, first one dating back to the 17th century. The landslide deposit completely mantles the slope with a thick cover of rock blocks. The Mt. Salta landslide is conditioned by the presence of Mt. Borgà regional thrust, which uplifts Jurassic limestone on the top of Cretaceous rock units. Above the thrust zone, folded and highly fractured rock mass dips steeply towards the slope free face, producing highly unstable setting. The study area has been classified as high seismic hazard and different vulnerable elements can be affected by the remobilisation of debris, among which a village, a national road and a big quarry that was opened, with the intent to exploit the part of the landslide deposit for construction purposes. In this study, numerical analysis was performed, to simulate the slope behaviour using distinct element method and applying UDEC code. The 2-D models were built on three cross-sections and elasto-plastic behaviour was assumed, both for rock matrix and discontinuities. The earthquake effect was modelled in pseudo-dynamic way, i.e. by magnifying the acceleration and applying also its horizontal component. The expected seismic acceleration in the study area was calculated on the basis of previous studies as equal to 0.28 g. The results proved that the increase of the vertical component alone has a small influence on the deformational behaviour of the system. Hence, the acceleration vector was deviated at 5° and then at 10° from the vertical. A small increment of the displacement was observed in the first case, whereas very large movements occurred in the second. Therefore, it can be concluded that, besides the magnitude of the earthquake, even small seismic waves in horizontal direction could trigger significant movements and therefore hazardous conditions. The modelled scenario should be helpful for planning of the functional countermeasure works and civil defence evacuation plan

    Site investigation and modelling at "La Maina" landslide (Carnian Alps, Italy)

    Get PDF
    International audienceThe Sauris reservoir is a hydroelectric basin closed downstream by a 136 m high, double arc concrete dam. The dam is firmly anchored to a consistent rock (Dolomia dello Schlern), but the Lower Triassic clayey formations, cropping out especially in the lower part of the slopes, have made the whole catchment basin increasingly prone to landslides. In recent years, the "La Maina landslide" has opened up several joints over a surface of about 100 000 m2, displacing about 1 500 000 m3 of material. Particular attention is now being given to the evolution of the instability area, as the reservoir is located at the foot of the landslide. Under the commission of the Regional Authority for Civil Protection a numerical modelling simulation in a pseudo-time condition of the slope was developed, in order to understand the risk for transport infrastructures, for some houses and for the reservoir and to take urgent mesaures to stabilize the slope. A monitoring system consisting of four inclinometers, three wire extensometers and ten GPS bench-mark pillars was immediately set up to check on surface and deep displacements. The data collected and the geological and geomorphological evidences was used to carry out a numerical simulation. The reliability of the results was checked by comparing the model with the morphological evidence of the movement. The mitigation measures were designed and realised following the indications provided by the model

    In Vivo Evaluation Of Complex Biogenic Silver Nanoparticle And Enoxaparin In Wound Healing

    Get PDF
    Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)The burns treatment is difficult, uncomfortable for the patient, and expensive for health system. Due to antimicrobial properties of silver nanoparticles (AgNP), these particles can avoid bacterial infection in wound and accelerate the wound healing. Furthermore, the complexation of AgNP with enoxaparin (low molecular weight heparin) may improve the healing process of lesions due to anti-inflammatory and angiogenic activity of enoxaparin (Enox). The aim of this study was evaluated the activity and toxicity of biogenic AgNP and AgNP complexed with Enox in in vivo burn wound model. AgNP was produced by biosynthesis method using Fusarium oxysporum. AgNP (20-40 nm) exhibited high stability due to protein capping around the particles that was confirmed by TEM, fluorescence spectroscopy, and FTIR. The wound contraction in in vivo model, after 28 days of treatment, was 55, 89, 91, and 95% for control, Enox, AgNP, and AgNP-Enox groups, respectively. No clear toxic effects in the biochemistry and hematological parameters were verified in all treated groups. However, in the AgNP-Enox group, a statistically significant increase in the urea levels was observed indicating increased proteolysis due to inflammation process. The results demonstrated that the complex AgNP-Enox is interesting for wound healing decreasing the time of lesions healing.Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP

    Effect of fulvic acids on lead-induced oxidative stress to metal sensitive Vicia faba L. plant

    Get PDF
    Lead (Pb) is a ubiquitous environmental pollutant capable to induce various morphological, physiological, and biochemical functions in plants. Only few publications focus on the influence of Pb speciation both on its phytoavailability and phytotoxicity. Therefore, Pb toxicity (in terms of lipid peroxidation, hydrogen peroxide induction, and photosynthetic pigments contents) was studied in Vicia faba plants in relation with Pb uptake and speciation. V. faba seedlings were exposed to Pb supplied as Pb(NO3)2 or complexed by two fulvic acids (FAs), i.e. Suwannee River fulvic acid (SRFA) and Elliott Soil fulvic acid (ESFA), for 1, 12, and 24 h under controlled hydroponic conditions. For both FAs, Pb uptake and translocation by Vicia faba increased at low level (5 mg l−1), whereas decreased at high level of application (25 mg l−1). Despite the increased Pb uptake with FAs at low concentrations, there was no influence on the Pb toxicity to the plants. However, at high concentrations, FAs reduced Pb toxicity by reducing its uptake. These results highlighted the role of the dilution factor for FAs reactivity in relation with structure; SRFA was more effective than ESFA in reducing Pb uptake and alleviating Pb toxicity to V. faba due to comparatively strong binding affinity for the heavy metal

    Screening of different Fusarium species to select potential species for the synthesis of silver nanoparticles

    Get PDF
    Eleven different Fusarium species were isolated from various infected plant materials and screened to select a potential species for the synthesis of silver nanoparticles. All the isolates were identified on the basis of cultural and microscopic characteristics using Fusarium identification keys. For the confirmation of preliminary identified isolates of Fusarium species, online BLAST analysis was carried out. All the eleven species demonstrated the ability for synthesis of silver nanoparticles. This was confirmed by UV-Vis spectroscopy, which gave characteristic peak around 420 nm. Further confirmation of silver nanoparticles was carried out using nanoparticles tracking analysis (NTA), zeta potential, photon correlation spectroscopy (PCS), powder X-ray diffractometry (XRD) and transmission electron microscopy (TEM). The smallest size of silver nanoparticles was synthesized by F. oxysporum (3-25 nm) and largest size silver nanoparticles were synthesized by F. solani (3-50 nm).Onze diferentes espécies de Fusarium foram isoladas a partir de vårios materiais vegetais infectados e selecionados para escolher uma espécie potencialmente importante para a síntese de nanopartículas de prata. Todos os isolados foram identificados com base nas características de cultivo e microscópicas usando as chaves de identificação de Fusarium. Para a confirmação e identificação preliminar dos isolados de espécies de Fusarium, a anålise BLAST on-line foi utilizada. Das espécies isoladas onze mostraram a capacidade para a síntese de nanopartículas de prata. A síntese de nanopartículas de prata foi confirmada por espectroscopia de UV-Vis que monstrou um pico característico em torno de 420 nm. Além disso, a confirmação da síntese de nanopartículas de prata foi realizada utilizando a anålise de rastreamento de nanoparticulas (nanoparticle tracking analysis-NTA), medidas de potencial zeta, espectroscopia de correlação de fótons (PCS), difratometria de raios X de pó (XRD), e microscopia eletrÎnica de transmissão (TEM). As menores nanopartículas de prata foram sintetizadas por F. oxysporum (3-25 nm), enquanto as maiores foram obtidas com F. solani (3-50 nm).19741982Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq
    • 

    corecore