337 research outputs found

    Relación entre la mortalidad materna y la gobernanza de los países iberoamericanos

    Get PDF
    Antecedentes/Objetivos: Pese al aumento de los recursos financieros y ser a menudo el 1er objetivo de los gobiernos, muchos países no están en camino de alcanzar el objetivo de Desarrollo del Milenio relacionado con la reducción de la mortalidad materna (MM). La gobernanza de los países es uno de los determinantes de la MM sobre el que hay disparidad de criterios y escasa literatura sobre el impacto de la misma en la MM. Objetivo: analizar la relación entre los factores de la gobernanza y la mortalidad materna en Iberoamérica, en 2012. Métodos: Estudio transversal ecológico para 2012, que utiliza el país como unidad de análisis sobre relación entre la gobernanza y la MM. Fuentes información: Estadísticas de Naciones Unidas, Banco Mundial, OMS/OPS. Se realizó un modelo de regresión lineal simple, y ajustado por riqueza (PIB). Resultados: Controlado por la riqueza del país, se detectan asociaciones significativas entre la MM con las variables de la gobernanza: Control de la corrupción R2 = 73,2% (p = 0,001), Estado de derecho R2 = 73% (p = 0,001), calidad regulatoria R2 = 70,9% (p = 0,002), efectividad gubernamental R2 = 69,5% (p = 0,003), voz y rendición de cuentas R2 = 68,3% (p = 0,004) y transparencia R2 = 66,8% (p = 0,003). Todas estas variables se asociación inversamente. Conclusiones: La mortalidad materna en 2012 está fuertemente relacionada con la capacidad y calidad gubernamental de los 19 países Iberoamericanos. En concreto, la MM se asocia con 6 de las 7 categorías componentes de la gobernanza. Afrontar la multicausalidad de la MM es un reto, entre los que se debe considerar y analizar el impulso político para la reducción de la corrupción, el desarrollo del estado de derecho, la calidad regulatoria, la efectividad gubernamental, el facilitar la voz y rendición de cuentas y la transparencia.Proyecto Prometeo. SENESCYT, Ecuador

    Gold nanoparticles crossing blood-brain barrier prevent HSV-1 infection and reduce herpes associated amyloid-βsecretion

    Full text link
    Infections caused by HSV-1 and their typical outbreaks invading the nervous system have been related to neurodegenerative diseases. HSV-1 infection may deregulate the balance between the amyloidogenic and non-amyloidogenic pathways, raising the accumulation of amyloid-β peptides, one of the hallmarks in the neurodegenerative diseases. An effective treatment against both, HSV-1 infections and neurodegeneration, is a major therapeutic target. Therefore, gold nanoparticles (NPAus) have been previously studied in immunotherapy, cancer and cellular disruptions with very promising results. Our study demonstrates that a new NPAus family inhibits the HSV-1 infection in a neural-derived SK-N-MC cell line model and that this new NPAus reduces the HSV-1-induced β-secretase activity, as well as amyloid-β accumulation in SK-APP-D1 modifies cell line. We demonstrated that NPAuG3-S8 crosses the blood-brain barrier (BBB) and does not generate cerebral damage to in vivo CD1 mice model. The NPAuG3-S8 could be a promising treatment against neuronal HSV-1 infections and neuronal disorders related to the Aβ peptidesThis work has been (partially) funded by the RD16/0025/0019, projects as part of Acción Estratégica en Salud, Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica (2013-2016) and cofinanced by Instituto de Salud Carlos III (Subdirección General de Evaluación) and Fondo Europeo de Desarrollo Regional (FEDER), RETIC PT17/0015/0042, Fondo de Investigacion Sanitaria (FIS) (grant numbers: PI16/01863; PI19/01638) and EPIICAL project. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, the Consolider Program, and CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. This work has been supported partially by a EUROPARTNER: Strengthening and spreading international partnership activities of the Faculty of Biology and Environmental Protection for interdisciplinary research and innovation of the University of Lodz Programme: NAWA International Academic Partnership Programme. This article/publication is based upon work from COST Action CA 17140 “Cancer Nanomedicine from the Bench to the Bedside” supported by COST (European Cooperation in Science and Technology

    Validación del monitor de medición de la grasa corporal por impedancia bioeléctrica OMRON BF 300

    Get PDF
    ObjetivosValorar la precisión del monitor de grasa corporal por impedancia bioeléctrica OMRON BF 300 y validar su medición del porcentaje de grasa corporal (%GC) frente a la ecuación de Siri. Diseño. Estudio descriptivo, transversal.EmplazamientoAtención primaria. Centros de Salud Coronel de Palma y San Fernando, Móstoles.ParticipantesEn la valoración de la precisión del monitor participaron 88 personas y 91 en la validación.Mediciones y resultados principalesLas determinaciones de %GC se realizaron por triplicado, anotándose la media. La precisión se evaluó mediante el coeficiente de correlación intraclase (CCI) y el coeficiente de variación (CV). La validez, mediante el error técnico, el CCI y el método de Bland-Altman. En la ecuación de Siri la densidad corporal se calculó con la ecuación de Durnin-Womersley. Precisión: el CCI fue de 0,999 y el CV de 0,4 ± 0,03. Validación: la diferencia de %GC monitor (26,6 ± 9,1%) – ecuación de Siri (27,8 ± 8,2%) fue de –1,27% (p < 0,01; IC del 95%, –1,97 a –0,57), el error técnico del monitor del 2,2% y el CCI de 0,956 (IC del 95%, 0,9335–0,9710), situándose un 80,2% de las diferencias monitor – ecuación por debajo del 5%, con un intervalo de concordancia por el método de Bland-Altman de +5,45 a –7,99%.ConclusionesEl monitor OMRON BF 300 satisface los criterios de precisión (CCI > 0,95 y CV bajo) y validación (error técnico excelente, CCI > 0,75 y diferencias clínicamente aceptables) y supone una alternativa válida a los pliegues cutáneos en la valoración nutricional del paciente.ObjectivesTo assess the accuracy of the OMRON BF 300 body fat monitor using bioelectric impedance and to validate its measurement of body fat percentage (BF%) against the Siri equation.DesignCross-sectional descriptive study.SettingPrimary care. Coronel de Palma and San Fernando Health Centres, Móstoles.Participants88 people took part in the assessment of the accuracy of the monitor, and 91 in the validation.Measurements and main resultsThe BF% were recorded in triplicate, with the mean being the figure noted. Precision was evaluated through the intra-class correlation coefficient (ICC) and the coefficient of variation (CV); validity, through technical error, the ICC and the Bland-Altman method. In the Siri equation, body density was calculated through the Durnin-Womersley equation. Precision: ICC was 0.999 and CV 0.4 ± 0.03. Validation: the difference between the BF% monitor (26.6 ± 9.1%) and the Siri equation (27.8 ± 8.2%) was –1.27% (p < 0.01; 95% CI –1.97 to –0.57); the technical error of the monitor was 2.2% and of the ICC 0.956 (95% CI, 0.9335–0.9710). Thus, 80.2% of the monitor-equation differences were below 5%, with a concordance interval under the Bland-Altman method of +5.45 to –7.99%.ConclusionsThe OMRON BF 300 monitor satisfies the precision criteria (ICC > 0.95 and low CV) and validation (excellent technical error, ICC > 0.75 and clinically acceptable differences) and is a valid alternative to cutaneous folds as a method of assessing nutrition of the patient

    Preliminary data on the ovarian histological structures observed in black hakes (M. polli and M. senegalensis) off Mauritania

    Get PDF
    The black hakes, Merluccius polli and M. senegalensis, are target species of a trawl Spanish fleet in Mauritanian waters. M. polli is a deep-water hake while M. senegalensis shows a shallower distribution. Both species are mixed in the landings, although the deeper hake totals a greater fraction (85%) of the catch due to the fishing strategy of the trawl fleet. The female gonads of both hakes were collected during an experimental survey carried out in the Mauritanian EEZ. Mature ovaries were examined from the start of the reproductive season in this area. Ovaries were processed by a standard histological technique. Histological characteristics of ovarian tissues and oocyte stages were studied by light microscopy. The ovaries of black hakes showed various stages of oocyte development from the small sized, chromatin nuclear and perinucleolar oocytes, and the medium sized, cortical alveoli and vitellogenic oocytes. This last stage presents yolk granules occupying the cytoplasm at different levels. In the case of M. senegalensis, the presence of large sized oocytes with early migration of the nucleus to the animal pole, as well as fusion of oil droplets indicate maturation and imminent spawning, thus, indicating an earlier spawning than M. polli. Furthermore, postovulatory follicles observed in M. senegalensis indicate a recent batch spawning episode. This result is concordant with the values of GSI obtained for both species in these waters. The reproductive period extends from October to Mars with a defined peak in December - January for females of both hakes, although the shallower species, M. senegalensis, shows an earlier spawning in this study. Atretic stages were observed, but their incidence was low because the sampling corresponds to the beginning of the spawning period. The species are multiple batch spawners as suggested by their oocyte size frequency distribution in the ovary. The present study is a first approach to ovarian histology of M. polli and M. senegalensis, and intended to provide basic knowledge for further detailed studies on the reproductive biology of these species, essential for an adequate assessment of this stock.Instituto Español de Oceanografía (IEO

    Pore water chemistry of a Paleogene continental mudrock in Spain and a Jurassic marine mudrock in Switzerland: Sampling methods and geochemical interpretation

    Get PDF
    Este trabajo resume una serie de metodologías y aproximaciones desarrolladas en CIEMAT durante los últimos 10 años con el objetivo de obtener información del agua intersticial de dos formaciones arcillosas: la Opalinus Clay procedente de Suiza y una formación de edad Oligoceno Mioceno española. Ambas tienen características bastante diferentes tanto desde el punto de vista de la metodología aplicada para su estudio como del origen sedimentario en sí mismo de las dos formaciones. La arcilla Suiza se estudió a través de la participación en el experimento DI-B en el laboratorio subterráneo de Mont Terri, en Suiza, uno de cuyos objetivos fue el muestreo y análisis in situ del agua intersticial de la arcilla. Las muestras de agua se recogieron después de desarrollar equipos y metodologías para conseguir una alteración mínima de los parámetros críticos del agua de la arcilla: pH, Eh, pCO2, Fe(II) y alcalinidad. La modelización geoquímica se utilizó como herramienta para interpretar y entender los principales procesos geoquímicos que controlan la química del agua y el estado actual del sistema. En relación con la arcilla española, el artículo muestra el desarrollo de una metodología integrada para caracterizar el agua intersticial de la formación arcillosa a partir de muestras de testigos correspondientes a un sondeo, denominados S1. El estudio trata de integrar todos los datos disponibles sobre la composición del agua intersticial obtenida mediante la técnica de compresión bajo presión (squeezing) y mediante extractos acuosos, con la caracterización mineralógica y geoquímica de los testigos. La modelización geoquímica se utilizó con dos objetivos principales: para valorar la consistencia de los datos analíticos del agua intersticial y para determinar la importancia relativa de los principales procesos que gobiernan la química del agua intersticial. Específicamente, la modelización se utilizó para simular los procesos que controlan la evolución redox del sistema. Se consideró equilibrio para los minerales reactivos como la calcita, dolomita, yeso y ferrihidrita. Además, se trató la degradación de la materia orgánica y la disolución oxidativa de la pirita desde un punto de vista cinético

    Inteligencia Artificial en Medicina y Salud: revisión y clasificación de las aplicaciones actuales y del futuro cercano y su impacto ético y social

    Get PDF
    This paper provides an overview of the current and near-future applications of Artificial Intelligence (AI) in Medicine and Health Care and presents a classification according to their ethical and societal aspects, potential benefits and pitfalls, and issues that can be considered controversial and are not deeply discussed in the literature. This work is based on an analysis of the state of the art of research and technology, including existing software, personal monitoring devices, genetic tests and editing tools, personalized digital models, online platforms, augmented reality devices, and surgical and companion robotics. Motivated by our review, we present and describe the notion of “extended personalized medicine”, we then review existing applications of AI in medicine and healthcare and explore the public perception of medical AI systems, and how they show, simultaneously, extraordinary opportunities and drawbacks that even question fundamental medical concepts. Many of these topics coincide with urgent priorities recently defined by the World Health Organization for the coming decade. In addition, we study the transformations of the roles of doctors and patients in an age of ubiquitous information, identify the risk of a division of Medicine into “fake-based”, “patient-generated”, and “scientifically tailored”, and draw the attention of some aspects that need further thorough analysis and public debate

    Application of a dynamic event tree methodolgy to steam generator tube rupture sequences

    Full text link
    The Integrated Safety Assessment (ISA) methodology, developed by the Spanish Nuclear Safety Council (CSN), has been applied to a thermo-hydraulical analysis of a Westinghouse 3-loop PWR plant by means of the dynamic event trees (DET) for Steam Generator Tube Rupture (SGTR) sequences. The ISA methodology allows obtaining the SGTR Dynamic Event Tree taking into account the operator actuation times. Simulations are performed with SCAIS (Simulation Code system for Integrated Safety Assessment), which includes a dynamic coupling with MAAP thermal hydraulic code. The results show the capability of the ISA methodology and SCAIS platform to obtain the DET of complex sequences

    Recent sediments dating using short-lived radionuclides

    Full text link
    [ES] Se presentan las características principales del método de datación de sedimentos recientes mediante el radioisótopo natural 210Pb y su validación utilizando radionucleidos artificiales tales como 137Cs y 239,240Pu. Se hace una revisión de los principios generales de esta metodología, se aportan recomendaciones prácticas para la recogida de testigos sedimentarios en el campo y su posterior procesamiento en el laboratorio, se describen diferentes técnicas analíticas utilizadas en la determinación de sus concentraciones y se explican brevemente varios modelos para la interpretación de los perfiles obtenidos. Por último, se incluyen ejemplos prácticos de su aplicación en secuencias sedimentarias procedentes de distintos ambientes marinos (estuario, bahía y plataforma continental) en el norte de la Península Ibérica.[EN] The main characteristics of the dating method of recent sediments using the natural radioisotope 210Pb and its validation with artificial radionuclides such as 137Cs and 239,240Pu are presented. A review of the general principles of this methodology is made, practical recommendations for the collection of sedimentary cores in the field and their subsequent processing in the laboratory are provided, several analytical techniques used to measure their concentrations are described and several models for the interpretation of the profiles are briefly explained. Finally, practical examples of its application in sedimentary sequences from different marine environments (estuary, bay and continental shelf) in the northern Iberian Peninsula are also included.Este artículo se ha inspirado en el manual de referencia publicado por Sanchez-Cabeza, J.A., Díaz-Asencio, M., Ruiz-Fernández, A.C., eds. (2012). Radiocronología de sedimentos costeros utilizando 210Pb: Modelos, Validación y Aplicaciones. Organismo Internacional de Energía Atómica, Viena, 105 pp., donde se profundizan diferentes aspectos tratados aquí. Trabajo financiado por los proyectos RTI2018-095678-B-C21, MCIU/AEI/FEDER, UE (MINECO) e IT976-16 (EJ/GV). Dos revisoras/es anónimas/os mejoraron el manuscrito original con sus comentarios y sugerencias. Contribución nº 56 de la Unidad de Investigación Geo-Q Zentroa (Laboratorio Joaquín Gómez de Llarena).Cearreta, A.; Gómez-Arozamena, J.; Irabien, M.; Ruiz-Fernández, A.; Sanchez-Cabeza, J.; Ortiz Moragón, J.; Sáez-Muñoz, M. (2022). Datación de sedimentos recientes utilizando radionucleidos de vida corta. Cuaternario y Geomorfología. 36(3-4):87-104. https://doi.org/10.17735/cyg.v36i3-4.9350487104363-

    Evaluation of spacial resolution of a PET scanner through the simulation and experimental measurement of the Recovery coefficient

    Get PDF
    Purpose: In order to measure spatial resolution of a PET tomograph in clinical conditions, this study describes and validates a method based on the recovery coefficient, a factor required to compensate underestimation in measured radioactivity concentration for small structures. Methods: In a PET image, the recovery factors of radioactive spheres were measured and their comparison with simulated recovery coefficients yielded the tomographic spatial resolution. Following this methodology, resolution was determined in different surrounding media and several conditions for reconstruction, including clinical conditions for brain PET studies. All spatial resolution values were compared with those obtained using classical methods with point and line sources. Results: In each considered condition, spatial resolution of the PET image estimated using the recovery coefficient showed good agreement with classical methods measurements, validating the procedure. Conclusion: Measurement of the recovery coefficient provides an assessment of tomographic spatial resolution, particularly in clinical studies conditions
    corecore