302 research outputs found
Recoil polarization and beam-recoil double polarization measurement of \eta electroproduction on the proton in the region of the S_{11}(1535) resonance
The beam-recoil double polarization P_{x'}^h and P_{z'}^h and the recoil
polarization P_{y'} were measured for the first time for the
p(\vec{e},e'\vec{p})\eta reaction at a four-momentum transfer of Q^2=0.1
GeV^2/c^2 and a center of mass production angle of \theta = 120^\circ at MAMI
C. With a center of mass energy range of 1500 MeV < W < 1550 MeV the region of
the S_{11}(1535) and D_{13}(1520) resonance was covered. The results are
discussed in the framework of a phenomenological isobar model (Eta-MAID). While
P_{x'}^h and P_{z'}^h are in good agreement with the model, P_{y'} shows a
significant deviation, consistent with existing photoproduction data on the
polarized-target asymmetry.Comment: 4 pages, 1 figur
The electric and magnetic form factors of the proton
The paper describes a precise measurement of electron scattering off the
proton at momentum transfers of \ GeV. The
average point-to-point error of the cross sections in this experiment is
0.37%. These data are used for a coherent new analysis together with all world
data of unpolarized and polarized electron scattering from the very smallest to
the highest momentum transfers so far measured. The extracted electric and
magnetic form factors provide new insight into their exact shape, deviating
from the classical dipole form, and of structure on top of this gross shape.
The data reaching very low values are used for a new determination of the
electric and magnetic radii. An empirical determination of the
Two-Photon-Exchange (TPE) correction is presented. The implications of this
correction on the radii and the question of a directly visible signal of the
pion cloud are addressed.Comment: 38 pages, 20 figures. Updated data files. PRC versio
Reply to Comment on "High-Precision Determination of the Electric and Magnetic Form Factors of the Proton"
In arXiv:1108.3058v1 [nucl-ex], Arrington criticizes the Coulomb corrections
we applied in the analysis of high precision form factor data (see
Phys.Rev.Lett.105:242001, 2010, arXiv:1007.5076v3 [nucl-ex]). We show, by
comparing different calculations cited in the Comment, that the criticism of
the Comment neglects the large uncertainty of "more modern" TPE corrections.
This uncertainty has also been seen in recent polarized measurements. We rerun
our analysis using one of these calculations. The results show that the Comment
exaggerates the quantitative effect at small Q^2.Comment: 1 page, 2 figure, To appear as a Reply Comment in Physical Review
Letter
High-precision determination of the electric and magnetic form factors of the proton
New precise results of a measurement of the elastic electron-proton
scattering cross section performed at the Mainz Microtron MAMI are presented.
About 1400 cross sections were measured with negative four-momentum transfers
squared up to Q^2=1 (GeV/c)^2 with statistical errors below 0.2%. The electric
and magnetic form factors of the proton were extracted by fits of a large
variety of form factor models directly to the cross sections. The form factors
show some features at the scale of the pion cloud. The charge and magnetic
radii are determined to be r_E=0.879(5)(stat.)(4)(syst.)(2)(model)(4)(group) fm
and r_M=0.777(13)(stat.)(9)(syst.)(5)(model)(2)(group) fm.Comment: 5 pages, 2 figures, published in Phys. Rev. Lett. v3: added
references, updated text, color figure
Particle tracking in kaon electroproduction with cathode-charge sampling in multi-wire proportional chambers
Wire chambers are routinely operated as tracking detectors in magnetic
spectrometers at high-intensity continuous electron beams. Especially in
experiments studying reactions with small cross-sections the reaction yield is
limited by the background rate in the chambers. One way to determine the track
of a charged particle through a multi-wire proportional chamber (MWPC) is the
measurement of the charge distribution induced on its cathodes. In practical
applications of this read-out method, the algorithm to relate the measured
charge distribution to the avalanche position is an important factor for the
achievable position resolution and for the track reconstruction efficiency. An
algorithm was developed for operating two large-sized MWPCs in a strong
background environment with multiple-particle tracks. Resulting efficiencies
were determined as a function of the electron beam current and on the signal
amplitudes. Because of the different energy-losses of pions, kaons, and protons
in the momentum range of the spectrometer the efficiencies depend also on the
particle species
Measurements of the \gamma * p --> \Delta(1232) reaction at low Q2
We report new p measurements in the
resonance at the low momentum transfer region utilizing the
magnetic spectrometers of the A1 Collaboration at MAMI. The mesonic cloud
dynamics are predicted to be dominant and appreciably changing in this region
while the momentum transfer is sufficiently low to be able to test chiral
effective calculations. The results disagree with predictions of constituent
quark models and are in reasonable agreement with dynamical calculations with
pion cloud effects, chiral effective field theory and lattice calculations. The
reported measurements suggest that improvement is required to the theoretical
calculations and provide valuable input that will allow their refinements
Beam-Normal Single Spin Asymmetry in Elastic Electron Scattering off Si and Zr
We report on a new measurement of the beam-normal single spin asymmetry
in the elastic scattering of 570 MeV transversely polarized
electrons off Si and Zr at . The
studied kinematics allow for a comprehensive comparison with former results on
C. No significant mass dependence of the beam-normal single spin
asymmetry is observed in the mass regime from C to Zr.Comment: Submitted for publication to Physics Letters
A Large-Scale FPGA-Based Trigger and Dead-Time Free DAQ System for the Kaos Spectrometer at MAMI
The Kaos spectrometer is maintained by the A1 collaboration at the Mainz
Microtron MAMI with a focus on the study of (e,e'K^+) coincidence reactions.
For its electron-arm two vertical planes of fiber arrays, each comprising
approximately 10 000 fibers, are operated close to zero degree scattering angle
and in close proximity to the electron beam. A nearly dead-time free DAQ system
to acquire timing and tracking information has been installed for this
spectrometer arm. The signals of 144 multi-anode photomultipliers are collected
by 96-channel front-end boards, digitized by double-threshold discriminators
and the signal time is picked up by state-of-the-art F1 time-to-digital
converter chips. In order to minimize background rates a sophisticated trigger
logic was implemented in newly developed Vuprom modules. The trigger performs
noise suppression, signal cluster finding, particle tracking, and coincidence
timing, and can be expanded for kinematical matching (e'K^+) coincidences. The
full system was designed to process more than 4 000 read-out channels and to
cope with the high electron flux in the spectrometer and the high count rate
requirement of the detectors. It was successfully in-beam tested at MAMI in
2009.Comment: Contributed to 17th IEEE Real Time Conference (RT10), Lisbon, 24-28
May 201
Design, Construction, Operation and Performance of a Hadron Blind Detector for the PHENIX Experiment
A Hadron Blind Detector (HBD) has been developed, constructed and
successfully operated within the PHENIX detector at RHIC. The HBD is a
Cherenkov detector operated with pure CF4. It has a 50 cm long radiator
directly coupled in a window- less configuration to a readout element
consisting of a triple GEM stack, with a CsI photocathode evaporated on the top
surface of the top GEM and pad readout at the bottom of the stack. This paper
gives a comprehensive account of the construction, operation and in-beam
performance of the detector.Comment: 51 pages, 39 Figures, submitted to Nuclear Instruments and Method
- …