A Centralized SDN Architecture for the 5G Cellular Network

In order to meet the increasing demands of high data rate and low latency cellular broadband applications, plans are underway to roll out the Fifth Generation (5G) cellular wireless system by the year 2020. This paper proposes a novel method for adapting the Third Generation Partnership Project (3GPP)'s 5G architecture to the principles of Software Defined Networking (SDN). We propose to have centralized network functions in the 5G network core to control the network, end-to-end. This is achieved by relocating the control functionality present in the 5G Radio Access Network (RAN) to the network core, resulting in the conversion of the base station known as the gNB into a pure data plane node. This brings about a significant reduction in signaling costs between the RAN and the core network. It also results in improved system performance. The merits of our proposal have been illustrated by evaluating the Key Performance Indicators (KPIs) of the 5G network, such as network attach (registration) time and handover time. We have also demonstrated improvements in attach time and system throughput due to the use of centralized algorithms for mobility management with the help of ns-3 simulations

CHARACTERIZATION OF Pr6O11 DOPED ZINC FLUOROBORATE GLASS

Pr3+ doped zinc fluoroborate glasses with the chemical composition [(mol %) 30ZnF2 – 20 TeO2 – (50-x) B2O3 – xPr6O11] (where x = 0.0, 0.1, 0.5, 1.0 and 1.5 mol %) of different concentration of rare earth element praseodymium (Pr3+) have been prepared by conventional melt quench technique. The physical parameters like density, refractive index, number density, molar refraction, molar electronic polarizability, electronic polarizability, dielectric constant, polaron radius, inter–ionic separation, molar volume and oscillator strength of these glasses were calculated as a function of dopant concentration. The densities and refractive indices of these glasses were found to be in the range 2.0 g/cm3 - 2.67 g/cm3 and 1.644 – 1.73 respectively. Stability of the glass doped with 1.0 mol % Pr3+ was found to be 120

A COMPARITIVE EVALUATION OF SPECIES OF GUDUCHI (TINOSPORA CORDIFOLIA (WILID.) MEIRS EX HOOK. F & THOMS., TINOSPORA MALABARICA MEIRS EX HOOK, TINOSPORA CRISPA MEIRS.) W.R.T SATWA

Background: Guduchi is a plant belonging to Menispermaceae family and widely used in Ayurvedic system of medicine. Tinospora cordifolia is the accepted botanical source of Guduchi. All the three species are indigenous to the tropical areas of India, Sri Lanka and Myanmar. Guduchi Satwa is the most commonly used dosage form of the plant for various conditions like fever, arthritis, gastric ulcer cough etc. Tinospora cordifolia (Guduchi) is a widely used shrub in folk and Ayurvedic systems of medicine. Species of the plant, stem size, collection time, season and maturity of the plant may affect the yield and physico-chemical profile of Guduchi Satwa. Due to high demand and less yield of Satwa from Guduchi plant, market sample of Guduchi Satwa is subjected to adulteration. Hence this study is aimed at standardizing Guduchi Satwa prepared from all the three available species of the plant. Methodology: The study deals with preparation of Satwa as per the classical text of Ayurveda, identifying organoleptic features, conducting physicochemical and photochemical screening of the Satwa of all the above mentioned species of Guduchi (Tinospora cordifolia (wilid.) Meirs ex hook. f & thoms., Tinospora malabarica meirs ex hook, Tinospora crispa meirs.). Results: The study provided significant difference in the yield of Satwa. Variations in the organoleptic characters were insignificant. All the phytoconstituents were found to be same and the physicochemical values were within the limits in all three species

Analgesic Activity of Sebastiania chamaelea (L.) Muell. Arg.

Background: This study intended to experimentally evaluate the analgesic activity of Sebastiania chamaelea (L.) Muell. Arg. which is widely used by folklore and traditional healers in pain relief. The drug is commonly known as ‘Bhumi Eranda’ among the locals.Methods: The plant material of Sebastiania chamaelea (L.) Muell. Arg. was collected from the fields of Sri Sri College of Ayurvedic Science and Research, Bangalore and preserved as per the standard method. The toxicity studies carried out earlier has proved that, the drug was non-toxic up to 3000 mg/kg body weight. The effective doses were derived as 300 mg/kg (lower) and 600 mg/kg (higher) body weight and the experimental study was conducted. Analgesic screening models used for the study are – Eddy’s Hot plate and Tail immersion models. The study was carried out in 4 groups i.e. Control, Standard, Lower dose Kashaya of Sebastiania chamaelea (L.) Muell. Arg. and Higher dose Kashaya of Sebastiania chamaelea (L.) Muell. Arg. in each model. The activity was compared with a standard reference drug, Tramadol and Diclofenac.Results: The results were analyzed by using one-way analysis of variance (ANOVA) test followed by Dunnett test to detect the significance of differences between each group and control.Conclusion: The study helped to conclude, Sebastiania chamaelea (L.) Muell. Arg. as an ideal analgesic and supported the traditional claim

Children Activity Alert System Using Accelerometer and GSM Technology

In this paper the discussion is about monitoring a child. Most of the children’s takes there first step sometime between 9 and 12 months and are walking well by the time ,when they are 14 or 16 months old and they will be in danger, during this age as they start walking. Hence we place a Accelerometer and RFID on the body of child to secure child from accidents such as falling or any injuries at home .The Accelerometer and RFID placed on hands and waist of baby which gives every movements of child. Temperature sensor is used to check the home temperature for safety of child

Prospective, non-randomized, parallel group, comparative observational study to compare maternal and neonatal outcome after regional and general anesthesia for Lower Segment Caesarean Section

Background: LSCS is a routine obstetric procedure performed under general anesthesia (GA) or regional anesthesia (RA). Choice of anesthesia depends on factors like gestational age, parity, co-morbidities, urgency of situation, etc. Both GA and RA involve the use of various medications which may influence maternal and neonatal outcome. As there are few studies comparing maternal and fetal outcome in RA and GA for LSCS in Indian population, the present study was taken up. Objectives of the study was to compare the maternal and neonatal outcome after RA and GA for LSCS.Methods: 60 subjects with indications for LSCS were assigned non-randomly into two groups, 30 for GA and 30 for RA, at the discretion of anesthesiologist. The demographic, anthropometric and clinical data was recorded for all subjects. The maternal outcome after RA and GA for LSCS was assessed by parameters like maternal blood loss, postoperative pain, postoperative nausea and vomiting, maternal satisfaction and neonatal outcome by parameters like birth weight, APGAR scores and NICU admissions. The maternal and neonatal outcome between the two groups was compared.Results: All subjects had clear indications for CS. In most of the subjects it was undertaken as an emergency procedure. GA was preferred in high risk subjects. Maternal blood loss, postoperative pain, NICU admissions, need for resuscitation was less under RA compared to GA. There was no difference in PONV, maternal satisfaction, birth weight and need for intubation.Conclusions: LSCS under RA showed a more favourable maternal and neonatal outcome

Novel hybrids of 1,2,3-triazole-benzoxazole:design, synthesis, and assessment of DprE1 enzyme inhibitors using fluorometric assay and computational analysis

Decaprenylphosphoryl-β-D-ribose-oxidase (DprE1), a subunit of the essential decaprenylphosphoribose-2'-epimerase, plays a crucial role in the synthesis of cell wall arabinan components in mycobacteria, including the pathogen responsible for tuberculosis, Mycobacterium tuberculosis. In this study, we designed, synthesised, and evaluated 15 (BOK-1-BOK-10 and BOP-1-BOP-5) potential inhibitors of DprE1 from a series of 1,2,3-triazole ligands using a validated DprE1 inhibition assay. Two compounds, BOK-2 and BOK-3, demonstrated significant inhibition with IC 50 values of 2.2 ± 0.1 and 3.0 ± 0.6 μM, respectively, whereas the standard drug (TCA-1) showed inhibition at 3.0 ± 0.2 μM. Through molecular modelling and dynamic simulations, we explored the structural relationships between selected 1,2,3-triazole compounds and DprE1, revealing key features for effective drug-target interactions. This study introduces a novel approach for designing ligands against DprE1, offering a potential therapeutic strategy for tuberculosis treatment. </p

Cadmium toxicity in medicinal plants: An overview of the tolerance strategies, biotechnological and omics approaches to alleviate metal stress

Medicinal plants, an important source of herbal medicine, are gaining more demand with the growing human needs in recent times. However, these medicinal plants have been recognized as one of the possible sources of heavy metal toxicity in humans as these medicinal plants are exposed to cadmium-rich soil and water because of extensive industrial and agricultural operations. Cadmium (Cd) is an extremely hazardous metal that has a deleterious impact on plant development and productivity. These plants uptake Cd by symplastic, apoplastic, or via specialized transporters such as HMA, MTPs, NRAMP, ZIP, and ZRT-IRT-like proteins. Cd exerts its effect by producing reactive oxygen species (ROS) and interfere with a range of metabolic and physiological pathways. Studies have shown that it has detrimental effects on various plant growth stages like germination, vegetative and reproductive stages by analyzing the anatomical, morphological and biochemical changes (changes in photosynthetic machinery and membrane permeability). Also, plants respond to Cd toxicity by using various enzymatic and non-enzymatic antioxidant systems. Furthermore, the ROS generated due to the heavy metal stress alters the genes that are actively involved in signal transduction. Thus, the biosynthetic pathway of the important secondary metabolite is altered thereby affecting the synthesis of secondary metabolites either by enhancing or suppressing the metabolite production. The present review discusses the abundance of Cd and its incorporation, accumulation and translocation by plants, phytotoxic implications, and morphological, physiological, biochemical and molecular responses of medicinal plants to Cd toxicity. It explains the Cd detoxification mechanisms exhibited by the medicinal plants and further discusses the omics and biotechnological strategies such as genetic engineering and gene editing CRISPR- Cas 9 approach to ameliorate the Cd stress

New microsatellite loci for annatto (Bixa orellana), a source of natural dyes from Brazilian Amazonia

Annatto (Bixa orellana) is a tropical crop native to the Americas with Amazonia as the likely center of origin of domestication. Annatto is important because it produces the dye bixin, which is widely used in the pharmaceutical, food, cosmetic and textile industries. A total of 32 microsatellite loci were isolated from a microsatellite-enriched genomic library, of which 12 polymorphic loci were used to characterize four populations of B. orellana and B. orellana var. urucurana, the wild relative. Higher genetic diversity estimates were detected for the wild populations when compared to the cultivated populations. Also, higher apparent outcrossing rates were found for the two wild than the cultivated populations. These results indicate a mixed mating system for the species. All markers described herein have potential to be used in further studies evaluating the genetic diversity, population dynamics, domestication, breeding, and conservation genetics of annatto. © 2018, Brazilian Society of Plant Breeding. All rights reserved