Geophysical Exploration of Vesta

Dawn’s year-long stay at Vesta allows comprehensive mapping of the shape, topography, geology, mineralogy, elemental abundances, and gravity field using it’s three instruments and highprecision spacecraft navigation. In the current Low Altitude Mapping Orbit (LAMO), tracking data is being acquired to develop a gravity field expected to be accurate to degree and order ~20 [1, 2]. Multi-angle imaging in the Survey and High Altitude Mapping Orbit (HAMO) has provided adequate stereo coverage to develop a shape model accurate to ~10 m at 100 m horizontal spatial resolution. Accurate mass determination combined with the shape yields a more precise value of bulk density, albeit with some uncertainty resulting from the unmeasured seasonally-dark north polar region. The shape and gravity of Vesta can be used to infer the interior density structure and investigate the nature of the crust, informing models for Vesta’s formation and evolution

An Atmospheric Variability Model for Venus Aerobraking Missions

Aerobraking has proven to be an enabling technology for planetary missions to Mars and has been proposed to enable low cost missions to Venus. Aerobraking saves a significant amount of propulsion fuel mass by exploiting atmospheric drag to reduce the eccentricity of the initial orbit. The solar arrays have been used as the primary drag surface and only minor modifications have been made in the vehicle design to accommodate the relatively modest aerothermal loads. However, if atmospheric density is highly variable from orbit to orbit, the mission must either accept higher aerothermal risk, a slower pace for aerobraking, or a tighter corridor likely with increased propulsive cost. Hence, knowledge of atmospheric variability is of great interest for the design of aerobraking missions. The first planetary aerobraking was at Venus during the Magellan mission. After the primary Magellan science mission was completed, aerobraking was used to provide a more circular orbit to enhance gravity field recovery. Magellan aerobraking took place between local solar times of 1100 and 1800 hrs, and it was found that the Venusian atmospheric density during the aerobraking phase had less than 10% 1 sigma orbit to orbit variability. On the other hand, at some latitudes and seasons, Martian variability can be as high as 40% 1 sigmaFrom both the MGN and PVO mission it was known that the atmosphere, above aerobraking altitudes, showed greater variability at night, but this variability was never quantified in a systematic manner. This paper proposes a model for atmospheric variability that can be used for aerobraking mission design until more complete data sets become available

On the Lense-Thirring test with the Mars Global Surveyor in the gravitational field of Mars

I discuss some aspects of the recent test of frame-dragging performed by me by exploiting the Root-Mean-Square (RMS) orbit overlap differences of the out-of-plane component N of the orbit of the Mars Global Surveyor (MGS) spacecraft in the gravitational field of Mars. A linear fit of the full time series of the entire MGS data (4 February 1999-14 January 2005) yields a normalized slope 1.03 +/- 0.41 (with 95% confidence bounds). Other linear fits to different data sets confirm the agreement with general relativity. The huge systematic effects induced by the mismodeling in the martian gravitational field claimed by some authors are absent in the MGS out-of-plane record. The non-gravitational forces affect at the same level of the gravitomagnetic one the in-plane orbital components of MGS, not the out-of-plane one. Moreover, they experience high-frequency variations which does not matter in the present case in which secular effects are relevant.Comment: LaTex2e, 8 pages, no figures, no tables, 17 references. It refers to K. Krogh, Class. Quantum Grav., 24, 5709-5715, 2007 based on astro-ph/0701653. Final version to appear in CEJP (Central European Journal of Physics

Anomalies of Density, Stresses, and the Gravitational Field in the Interior of Mars

We determined the possible compensation depths for relief harmonics of different degrees and orders. The relief is shown to be completely compensated within the depth range of 0 to 1400 km. The lateral distributions of compensation masses are determined at these depths and the maps are constructed. The possible nonisostatic vertical stresses in the crust and mantle of Mars are estimated to be 64 MPa in compression and 20 MPa in tension. The relief anomalies of the Tharsis volcanic plateau and symmetric feature in the eastern hemisphere could have arisen and been maintained dynamically due to two plumes in the mantle substance that are enriched with fluids. The plumes that originate at the core of Mars can arise and be maintained by the anomalies of the inner gravitational field achieving +800 mGal in the region of plume formation, - 1200 mGal above the lower mantle-core transition layer, and -1400 mGal at the crust.Comment: 9 pages, 5 figure

INPOP08, a 4-D planetary ephemeris: From asteroid and time-scale computations to ESA Mars Express and Venus Express contributions

The latest version of the planetary ephemerides developed at the Paris Observatory and at the Besancon Observatory is presented here. INPOP08 is a 4-dimension ephemeris since it provides to users positions and velocities of planets and the relation between TT and TDB. Investigations leading to improve the modeling of asteroids are described as well as the new sets of observations used for the fit of INPOP08. New observations provided by the European Space Agency (ESA) deduced from the tracking of the Mars Express (MEX) and Venus Express (VEX) missions are presented as well as the normal point deduced from the Cassini mission. We show the huge impact brought by these observations in the fit of INPOP08, especially in terms of Venus, Saturn and Earth-Moon barycenter orbits.Comment: 14 pages. submitted to A&A. accepted in A&

Dawn arrives at Ceres: Exploration of a small, volatile-rich world

On 6 March 2015, Dawn arrived at Ceres to find a dark, desiccated surface punctuated by small, bright areas. Parts of Ceres’ surface are heavily cratered, but the largest expected craters are absent. Ceres appears gravitationally relaxed at only the longest wavelengths, implying a mechanically strong lithosphere with a weaker deep interior. Ceres’ dry exterior displays hydroxylated silicates, including ammoniated clays of endogenous origin. The possibility of abundant volatiles at depth is supported by geomorphologic features such as flat crater floors with pits, lobate flows of materials, and a singular mountain that appears to be an extrusive cryovolcanic dome. On one occasion, Ceres temporarily interacted with the solar wind, producing a bow shock accelerating electrons to energies of tens of kilovolts

The Dawn Gravity Investigation at Vesta and Ceres

The objective of the Dawn gravity investigation is to use high precision X-band Doppler tracking and landmark tracking from optical images to measure the gravity fields of Vesta and Ceres to a half-wavelength surface resolution better than 90-km and 300-km, respectively. Depending on the Doppler tracking assumptions, the gravity field will be determined to somewhere between harmonic degrees 15 and 25 for Vesta and about degree 10 for Ceres. The gravity fields together with shape models determined from Dawn's framing camera constrain models of the interior from the core to the crust. The gravity field is determined jointly with the spin pole location. The second degree harmonics together with assumptions on obliquity or hydrostatic equilibrium may determine the moments of inertia

Simulated recovery of Europa's global shape and tidal Love numbers from altimetry and radio tracking during a dedicated flyby tour

The fundamental scientific objectives for future spacecraft exploration of Jupiter's moon Europa include confirmation of the existence of subsurface ocean beneath the surface ice shell and constraints on the physical properties of the ocean. Here we conduct a comprehensive simulation of a multiple-flyby mission. We demonstrate that radio tracking data can provide an estimate of the gravitational tidal Love number k2 with sufficient precision to confirm the presence of a liquid layer. We further show that a capable long-range laser altimeter can improve determination of the spacecraft position, improve the k2 determination (2 (3-4% error), which is directly related to the amplitude of the surface tidal deformation. These measurements, in addition to the global shape accurately constrained by the long altimetric profiles, can yield further constraints on the interior structure of Europa. Key Points A multiple-flyby mission to Europa can recover key geophysical parameters Laser altimetry can uniquely and accurately recover the global shape of Europa Laser altimetry enables the recovery of h2 to constrain the ice shell thicknes

Gravity Recovery and Interior Laboratory (GRAIL) Mission: Status at the Initiation of the Science Mapping Phase

The Gravity Recovery And Interior Laboratory (GRAIL) mission, a component of NASA's Discovery Program, launched successfully from Cape Canaveral Air Force Station on September 10, 2011. The dual spacecraft traversed independent, low-energy trajectories to the Moon via the EL-1 Lagrange point and inserted into elliptical, 11.5-hour polar orbits around the Moon on December 31, 2011, and January 1, 2012. The spacecraft are currently executing a series of maneuvers to circularize their orbits at 55-km mean altitude. Once the mapping orbit is achieved, the spacecraft will undergo additional maneuvers to align them into mapping configuration. The mission is on track to initiate the Science Phase on March 8, 2012

Dawn arrives at Ceres: Exploration of a small, volatile-rich world

On 6 March 2015, Dawn arrived at Ceres to find a dark, desiccated surface punctuated by small, bright areas. Parts of Ceres’ surface are heavily cratered, but the largest expected craters are absent. Ceres appears gravitationally relaxed at only the longest wavelengths, implying a mechanically strong lithosphere with a weaker deep interior. Ceres’ dry exterior displays hydroxylated silicates, including ammoniated clays of endogenous origin. The possibility of abundant volatiles at depth is supported by geomorphologic features such as flat crater floors with pits, lobate flows of materials, and a singular mountain that appears to be an extrusive cryovolcanic dome. On one occasion, Ceres temporarily interacted with the solar wind, producing a bow shock accelerating electrons to energies of tens of kilovolts