Extraction of Sm(III)and Nd(III) with N,N,N’,N’-tetrabutyl-3-oxy-diglycolamidefrom hydrochloric acid

The extraction behavior of Sm(III) and Nd(III) with N,N,N’,N’-tetrabutyl-3-oxa-diglycolamide (TBDGA) in 70% kerosene-30% n-octanol from hydrochloride acid wasstudied. The effect of hydrochloric acid concentration, extractant concentration,and temperature on the distribution of rare earth elementswas investigated. The extraction mechanism was established and the stoichiometry of the main extracted species was confirm to be SmCl3•2TBDGA and NdCl3•2TBDGA for Sm(III) and Nd(III), respectively. The extraction distribution ratio decreases with an increase in temperature, which demonstrates that the extraction reaction is exothermic. The IR spectra of the loaded organic phase and free extractant were recorded and discussed

The Vacuum System of HIRFL

AbstractThe vacuum system of Heavy Ion Research Facility in Lanzhou (HIRFL) is a large and complex system. HIRFL consists of two ECR ion sources, a sector focus cyclotron (SFC), a separate sector cyclotron (SSC) and a multi-purpose cooling storage ring system which has a main ring (CSRm) and an experiment ring (CSRe). Several beam lines connect these accelerators together and transfer various heavy ion beams to more than 10 experiment terminals. According to the requirements of the ion acceleration and ion lifetime, the working pressure in each accelerator is different. SFC is nearly 50 years old. After upgrade, the working pressure in SFC is improved from 10-6mbar to 10-8mbar. The pressure in SSC which was built in the 1980s reaches the same level. The cooling storage ring system with a length of 500m came into operation in 2007. The average pressures in CSRm and CSRe are 5×10-12mbar and 8×10-12mbar respectively. Different designs were adopt for vacuum system of a dozen beam lines to meet specific requirement of each experiment terminal. Along with the extensive development of the heavy ion researches and applications, new accelerators of HIRFL are under construction. The vacuum system of the new machines will be designed and constructed followed the overall schedule

Measurements of the observed cross sections for exclusive light hadron production in e^+e^- annihilation at \sqrt{s}= 3.773 and 3.650 GeV

By analyzing the data sets of 17.3 pb$^{-1}$ taken at $\sqrt{s}=3.773$ GeV and 6.5 pb$^{-1}$ taken at $\sqrt{s}=3.650$ GeV with the BESII detector at the BEPC collider, we have measured the observed cross sections for 12 exclusive light hadron final states produced in $e^+e^-$ annihilation at the two energy points. We have also set the upper limits on the observed cross sections and the branching fractions for $\psi(3770)$ decay to these final states at 90% C.L.Comment: 8 pages, 5 figur

Measurements of psi(2S) decays to octet baryon-antibaryon pairs

With a sample of 14 million psi(2S) events collected by the BESII detector at the Beijing Electron Positron Collider (BEPC), the decay channels psi(2S)->p p-bar, Lambda Lambda-bar, Sigma0 Sigma0-bar, Xi Xi-bar are measured, and their branching ratios are determined to be (3.36+-0.09+-0.24)*10E-4, (3.39+-0.20+-0.32)*10E-4, (2.35+-0.36+-0.32)*10E-4, (3.03+-0.40+-0.32)*10E-4, respectively. In the decay psi(2S)->p p-bar, the angular distribution parameter alpha is determined to be 0.82+-0.17+-0.04.Comment: 8 pages, 8 figure

Partial Wave Analysis of J/ψ→γ(K+K−π+π−)J/\psi \to \gamma (K^+K^-\pi^+\pi^-)

BES data on $J/\psi \to \gamma (K^+K^-\pi^+\pi^-)$ are presented. The $K^*\bar K^*$ contribution peaks strongly near threshold. It is fitted with a broad $0^{-+}$ resonance with mass $M = 1800 \pm 100$ MeV, width $\Gamma = 500 \pm 200$ MeV. A broad $2^{++}$ resonance peaking at 2020 MeV is also required with width $\sim 500$ MeV. There is further evidence for a $2^{-+}$ component peaking at 2.55 GeV. The non-$K^*\bar K^*$ contribution is close to phase space; it peaks at 2.6 GeV and is very different from $K^{*}\bar{K^{*}}$.Comment: 15 pages, 6 figures, 1 table, Submitted to PL

Bd0−Bˉd0B^0_d-{\bar B}^0_d mixing in the left-right supersymmetric model

We analyze $B^0_d-{\bar B}^0_d$ mixing in a fully left-right supersymmetric model. We give explicit expressions for all the chargino, gluino, gluino-neutralino and neutralino amplitudes involved in the process. We calculate the mass difference $\Delta m_d$ and CP asymmetry $a_{J/\psi K_s}$ in both the constrained case (where the only flavor violation comes from the Cabibbo-Kobayashi-Maskawa matrix) and the unconstrained case (including soft supersymmetry breaking terms). The constrained case does not contain any new information beyond the supergravity-inspired MSSM. In the unconstrained case, the main contribution to $B^0_d-{\bar B}^0_d$ and the CP asymmetry is due to either gluino diagrams, if the dominating flavor mixing arises in the down squark sector, or chargino diagrams, if the dominant flavor mixing comes from the up squark sector. We include numerical results and compare this analysis with the ones performed in other models.Comment: 26 pages, 10 figure

Integrated motor drives: state of the art and future trends

With increased need for high power density, high efficiency and high temperature capabilities in Aerospace and Automotive applications, Integrated Motor Drives (IMD) offers a potential solution. However, close physical integration of the converter and the machine may also lead to an increase in components temperature. This requires careful mechanical, structural and thermal analysis; and design of the IMD system. This paper reviews existing IMD technologies and their thermal effects on the IMD system. The effects of the power electronics (PE) position on the IMD system and its respective thermal management concepts are also investigated. The challenges faced in designing and manufacturing of an IMD along with the mechanical and structural impacts of close physical integration is also discussed and potential solutions are provided. Potential converter topologies for an IMD like the Matrix converter, 2-level Bridge, 3-level NPC and Multiphase full bridge converters are also reviewed. Wide band gap devices like SiC and GaN and their packaging in power modules for IMDs are also discussed. Power modules components and packaging technologies are also presented

Anomalous Line-Shape of Cross Sections for e+e−→Hadronse^+e^- \to {\rm Hadrons} in the Center-of-Mass Energy Region between 3.650 and 3.872 GeV

We observe an obvious anomalous line-shape of the $e^+e^- \to {\rm hadrons}$ total cross sections in the energy region between 3.700 and 3.872 GeV from the data samples taken with the BES-II detector at the BEPC Collider. Re-analysis of the data shows that it is inconsistent with the explanation for only one simple $\psi(3770)$ resonance with a statistical significance of $7\sigma$. The anomalous line-shape may be explained by two possible enhancements of the inclusive hadron production near the center-of-mass energies of 3.764 GeV and 3.779 GeV, indicating that either there is likely a new structure in addition to the $\psi(3770)$ resonance around 3.773 GeV, or there are some physics effects reflecting the $D\bar D$ production dynamics