130 research outputs found
Model of the mechanical response of short flax fiber reinforced polymer matrix composites
AbstractNatural-fiber-reinforced short-fiber composites are finding more applications lately, therefore there is a need for estimation of the mechanical properties of such composites based on the properties of the constituents. The fibers themselves also possess complicated internal structure, resulting in anisotropy of their properties. Taking into account the internal structure of bast fiber, we evaluate the elastic properties of a composite unit cell, consisting of a fiber of average length and matrix according to the fiber volume fraction in the composite. The unit cell properties are used to estimate the stiffness of a misaligned short-fiber composite by means of orientation averaging. The results obtained are compared with the experimental stress-strain diagrams of short flax fiber/polypropylene matrix composite. Usually the mechanical response of short-fiber/polymer matrix composite is non-linear due to the inelastic matrix behavior. Accounting for the non-linear deformation of the matrix in the unit cell by modeling it as an elastic-plastic material, we also estimate its non-linear response under uniaxial loading
Biaxial fragmentation of thin silicon oxide coatings on poly(ethylene terephthalate)
Crack patterns of 53 nm and 103 nm thick silicon oxide coatings on poly(ethylene terephthalate) films are analyzed under equibiaxial stress loading, by means of a bulging cell mounted under an optical microscope with stepwise pressurization of film specimens. The biaxial stress and strain are modeled from classical elastic membrane equations, and an excellent agreement is obtained with a finite element method. In the large pressure range, the derivation of the biaxial strain from force equilibrium considerations are found to reproduce accurately the measured data up to 25% strain. The examination of the fragmentation process of the coating under increasing pressure levels reveals that the crack onset strain of the oxide coating is similar to that measured under uniaxial tension. The fragmentation of the coating under biaxial tension is also characterized by complex dynamic phenomena which image the peculiarities of the stress field, resulting in considerable broadening of the fragment size distribution. The evolution of the average fragment area as a function of biaxial stress in the early stages of the fragmentation process is analyzed using Weibull statistics to describe the coating strengt
Estimation of interfacial fracture toughness based on progressive edge delamination of a thin transparent coating on a polymer substrate
Evaluation of thin film adhesion to a compliant substrate by the analysis of progressive buckling in the fragmentation test
Influences of roll-to-roll process and polymer substrate anisotropies on the tensile failure of thin oxide films
The influence of internal stress anisotropy resulting from anisotropic loading in a roll-to-roll (R2R) process, and polymer substrate anisotropy on the crack onset strain (COS) of thin oxide coatings was analyzed. Experimental data obtained for R2R processed films were compared with data obtained using an isotropic sheet-to-sheet (S2S) process with the same anisotropic substrate. In the R2R case the COS was found to increase by 20% between the transverse direction and the machine direction. In the S2S case the COS was found to be independent of orientation, except at a 45° in-plane orientation with respect to the machine direction, where it was 15% higher. The internal stress in the machine direction could not be determined, presumably due to deposition-induced curvature changes of the polymer substrate, and was therefore fitted to the COS data. Fracture mechanics analysis and finite element modeling of the experimental data showed that the influence of substrate anisotropy was marginal, and that it was the process-induced internal strain in the coating which controlled the COS. © 2010 Elsevier B.V
Mechanics of fragmentation of crocodile skin and other thin films
Fragmentation of thin layers of materials is mediated by a network of cracks on its surface. It is commonly seen in dehydrated paintings or asphalt pavements and even in graphene or other two-dimensional materials, but is also observed in the characteristic polygonal pattern on a crocodile’s head. Here, we build a simple mechanical model of a thin film and investigate the generation and development of fragmentation patterns as the material is exposed to various modes of deformation. We find that the characteristic size of fragmentation, defined by the mean diameter of polygons, is strictly governed by mechanical properties of the film material. Our result demonstrates that skin fragmentation on the head of crocodiles is dominated by that it features a small ratio between the fracture energy and Young’s modulus, and the patterns agree well with experimental observations. Understanding this mechanics-driven process could be applied to improve the lifetime and reliability of thin film coatings by mimicking crocodile skin
Mechanical integrity of thin inorganic coatings on polymer substrates under quasi-static, thermal and fatigue loadings
Strength variability of single flax fibres
Due to the typical large variability in the measured mechanical properties of flax fibres, they are often employed only in low grade composite applications. The present study aims to investigate the reasons for the variability in tensile properties of flax fibres. It is found that an inaccuracy in the determination of the cross-sectional area of the fibres is one major reason for the variability in properties. By applying a typical circular fibre area assumption, a considerable error is introduced into the calculated mechanical properties. Experimental data, together with a simple analytical model, are presented to show that the error is increased when the aspect ratio of the fibre cross-sectional shape is increased. A variability in properties due to the flax fibres themselves is found to originate from the distribution of defects along the fibres. Two distinctive types of stress–strain behaviours (linear and nonlinear) of the fibres are found to be correlated with the amount of defects. The linear stress–strain curves tend to show a higher tensile strength, a higher Young’s modulus, and a lower strain to failure than the nonlinear curves. Finally, the fibres are found to fracture by a complex microscale failure mechanism. Large fracture zones are governed by both surface and internal defects; and these cause cracks to propagate in the transverse and longitudinal directions
- …