305 research outputs found

    Strength of Granular Materials in Transient and Steady State Rapid Shear

    Get PDF
    This paper discusses relationships between the frictional strength of a flowing granular material and quantities including porosity and grain-scale energy dissipation. The goal of the paper is to foster an understanding of frictional strength that will facilitate the development of constitutive laws incorporating important physical processes. This is accomplished in several steps. First, a friction relationship is derived for a steady state simple shear flow using an energy balance approach. The relationship shows that friction is explicitly related to porosity, grain connectivity, and grain-scale dissipation rates. Next, the friction relationship is extended to describe transient changes in frictional behavior. The relationship shows that, in addition to the processes important for steady flows, the rate of dilatation and changes in internal energy play a role in the frictional strength of a granular material away from steady state. Finally, numerical simulations are performed to illustrate the accuracy of the friction relationships and illuminate important scaling behavior. The discussion of numerical simulations focuses on the rate-dependence of frictional strength and the partition of macroscopic energy dissipation into its grain-scale components. New interpretations of existing constitutive laws and ideas for new constitutive laws are discussed

    Comparison of the salivary and dentinal microbiome of children with severe-early childhood caries to the salivary microbiome of caries-free children

    Get PDF
    peer-reviewedBackground The main objectives of this study were to describe and compare the microbiota of 1) deep dentinal lesions of deciduous teeth of children affected with severe early childhood caries (S-ECC) and 2) the unstimulated saliva of these children and 3) the unstimulated saliva of caries-free children, and to compare microbiota compositional differences and diversity of taxa in these sampled sites. Methods Children with S-ECC and without S-ECC were recruited. The saliva of all children with and without S-ECC was sampled along with the deep dentinal microbiota from children affected by S-ECC. The salivary microbiota of children affected by S-ECC (n = 68) was compared to that of caries-free children (n = 70), by Illumina MiSeq sequencing of 16S rRNA amplicons. Finally, the caries microbiota of deep dentinal lesions of those children with S-ECC was investigated. Results Using two beta diversity metrics (Bray Curtis dissimilarity and UniFrac distance), the caries microbiota was found to be distinct from that of either of the saliva groups (caries-free & caries-active) when bacterial abundance was taken into account. However, when the comparison was made by measuring only presence and absence of bacterial taxa, all three microbiota types separated. While the alpha diversity of the caries microbiota was lowest, the diversity difference between the caries samples and saliva samples was statistically significant (p < 0.001). The major phyla of the caries active dentinal microbiota were Firmicutes (median abundance value 33.5%) and Bacteroidetes (23.2%), with Neisseria (10.3%) being the most abundant genus, followed by Prevotella (10%). The caries-active salivary microbiota was dominated by Proteobacteria (median abundance value 38.2%) and Bacteroidetes (27.8%) with the most abundant genus being Neisseria (16.3%), followed by Porphyromonas (9.5%). Caries microbiota samples were characterized by high relative abundance of Streptococcus mutans, Prevotella spp., Bifidobacterium and Scardovia spp. Conclusions Distinct differences between the caries microbiota and saliva microbiota were identified, with separation of both salivary groups (caries-active and caries-free) whereby rare taxa were highlighted. While the caries microbiota was less diverse than the salivary microbiota, the presence of these rare taxa could be the difference between health and disease in these children

    Development of a self-report measure of capability wellbeing for adults: the ICECAP-A

    Get PDF
    Purpose The benefits of health and social care are not confined to patient health alone and therefore broader measures of wellbeing may be useful for economic evaluation.\ud This paper reports the development of a simple measure of capability wellbeing for adults (ICECAP-A).\ud Methods In-depth, informant-led, interviews to identify the attributes of capability wellbeing were conducted with 36 adults in the UK. Eighteen semi-structured, repeat interviews were carried out to develop a capability-based descriptive system for the measure. Informants were purposively selected to ensure variation in socio-economic status, age, sex, ethnicity and health. Data analysis was carried out inductively and iteratively alongside interviews, and findings were used to shape the questions in later interviews.\ud Results Five over-arching attributes of capability wellbeing were identified for the measure: ‘‘stability’’,‘‘attachment’’, ‘‘achievement’’, ‘‘autonomy’’ and ‘‘enjoyment’’. One item, with four response categories, was developed for each attribute for the ICECAP-A descriptive system.\ud Conclusions The ICECAP-A capability measure represents a departure from traditional health economics outcome measures, by treating health status as an influence over broader attributes of capability wellbeing. Further work is required to value and validate the attributes and test the sensitivity of the ICECAP-A to healthcare interventions

    Perfect weddings abroad

    Get PDF
    Approximately 16% of UK couples are currently married abroad. However, academic or practitioner focused research that explores the complex nature of a couple’s buying preferences or the development of innovative marketing strategies by businesses operating within the weddings abroad niche sector, is almost non-existent. This exploratory paper examines the role and relevance of marketing within the weddings abroad sector. The complex nature of customer needs in this high emotional and involvement experience, are identified and explored. A case study of Perfect Weddings Abroad Ltd highlights distinctive features and characteristics. Social networking and the use of home-workers, with a focus on reassurance and handholding are important tools used to develop relationships with customers. These tools and techniques help increase the tangibility of a weddings abroad package. Clusters of complementary services that are synergistic and provide sources of competitive advantage are identified and an agenda for future research is developed

    The Locations of Gamma-Ray Bursts Measured by COMPTEL

    Get PDF
    The COMPTEL instrument on the Compton Gamma Ray Observatory is used to measure the locations of gamma-ray bursts through direct imaging of MeV photons. In a comprehensive search, we have detected and localized 29 bursts observed between 1991 April 19 and 1995 May 31. The average location accuracy of these events is 1.25\arcdeg (1σ\sigma), including a systematic error of \sim0.5\arcdeg, which is verified through comparison with Interplanetary Network (IPN) timing annuli. The combination of COMPTEL and IPN measurements results in locations for 26 of the bursts with an average ``error box'' area of only \sim0.3 deg2^2 (1σ\sigma). We find that the angular distribution of COMPTEL burst locations is consistent with large-scale isotropy and that there is no statistically significant evidence of small-angle auto-correlations. We conclude that there is no compelling evidence for burst repetition since no more than two of the events (or \sim7% of the 29 bursts) could possibly have come from the same source. We also find that there is no significant correlation between the burst locations and either Abell clusters of galaxies or radio-quiet quasars. Agreement between individual COMPTEL locations and IPN annuli places a lower limit of \sim100~AU (95% confidence) on the distance to the stronger bursts.Comment: Accepted for publication in the Astrophysical Journal, 1998 Jan. 1, Vol. 492. 33 pages, 9 figures, 5 table

    Communication style and exercise compliance in physiotherapy (CONNECT). A cluster randomized controlled trial to test a theory-based intervention to increase chronic low back pain patients’ adherence to physiotherapists’ recommendations: study rationale, design, and methods

    Get PDF
    Physical activity and exercise therapy are among the accepted clinical rehabilitation guidelines and are recommended self-management strategies for chronic low back pain. However, many back pain sufferers do not adhere to their physiotherapist’s recommendations. Poor patient adherence may decrease the effectiveness of advice and home-based rehabilitation exercises. According to self-determination theory, support from health care practitioners can promote patients’ autonomous motivation and greater long-term behavioral persistence (e.g., adherence to physiotherapists’ recommendations). The aim of this trial is to assess the effect of an intervention designed to increase physiotherapists’ autonomy-supportive communication on low back pain patients’ adherence to physical activity and exercise therapy recommendations. \ud \ud This study will be a single-blinded cluster randomized controlled trial. Outpatient physiotherapy centers (N =12) in Dublin, Ireland (population = 1.25 million) will be randomly assigned using a computer-generated algorithm to either the experimental or control arm. Physiotherapists in the experimental arm (two hospitals and four primary care clinics) will attend eight hours of communication skills training. Training will include handouts, workbooks, video examples, role-play, and discussion designed to teach physiotherapists how to communicate in a manner that promotes autonomous patient motivation. Physiotherapists in the waitlist control arm (two hospitals and four primary care clinics) will not receive this training. Participants (N = 292) with chronic low back pain will complete assessments at baseline, as well as 1 week, 4 weeks, 12 weeks, and 24 weeks after their first physiotherapy appointment. Primary outcomes will include adherence to physiotherapy recommendations, as well as low back pain, function, and well-being. Participants will be blinded to treatment allocation, as they will not be told if their physiotherapist has received the communication skills training. Outcome assessors will also be blinded. \ud \ud We will use linear mixed modeling to test between arm differences both in the mean levels and the rates of change of the outcome variables. We will employ structural equation modeling to examine the process of change, including hypothesized mediation effects. \ud \ud This trial will be the first to test the effect of a self-determination theory-based communication skills training program for physiotherapists on their low back pain patients’ adherence to rehabilitation recommendations. Current Controlled Trials ISRCTN63723433\u

    Failures in sand in reduced gravity environments

    Get PDF
    The strength of granular materials, specifically sand is important for understanding physical phenomena on other celestial bodies. However, relatively few experiments have been conducted to determine the dependence of strength properties on gravity. In this work, we experimentally investigated relative values of strength (the peak friction angle, the residual friction angle, the angle of repose, and the peak dilatancy angle) in Earth, Martian, Lunar, and near-zero gravity. The various angles were captured in a classical passive Earth pressure experiment conducted on board a reduced gravity flight and analyzed using digital image correlation. The data showed essentially no dependence of the peak friction angle on gravity, a decrease in the residual friction angle between Martian and Lunar gravity, no dependence of the angle of repose on gravity, and an increase in the dilation angle between Martian and Lunar gravity. Additionally, multiple flow surfaces were seen in near-zero gravity. These results highlight the importance of understanding strength and deformation mechanisms of granular materials at different levels of gravity
    corecore