54 research outputs found
Reprocessing with GANEX:Methodology for Ligand Radiation Tolerance Testing
Results demonstrating the methodology for testing the radiation tolerance of organic ligands are presented. A high activity sealed source was used to irradiate samples which were sequentially removed and analysed using a sensitive mass spectrometer. The degradation of a candidate ligand for a new reprocessing process “GANEX” was found to be around 50% after 567 kGy exposure to gamma from Cs-137.<br/
Chitin and carbon nanotube composites as biocompatible scaffolds for neuron growth
Preparation of biocompatible and electrically-conducting chitin nanotube composite scaffold for potential use in implantable electrode for stimulation and repair of neurons.</p
Compositional and structural analysis of Fukushima-derived particulates using high-resolution x-ray imaging and synchrotron characterisation techniques
Development of a facile fluorophosphonate-functionalised titanium surface for potential orthopaedic applications
Background: Aseptic loosening of total joint replacements (TJRs) continues to be the main cause of implant failures. The socioeconomic impact of surgical revisions is hugely significant; in the United Kingdom alone, it is estimated that £137 m is spent annually on revision arthroplasties. Enhancing the longevity of titanium implants will help reduce the incidence and overall cost of failed devices. Methods: In realising the development of a superior titanium technology, we exploited the natural affinity of titanium for phosphonic acids and developed a facile means of coating the metal with (3S)1-fluoro-3-hydroxy-4-(oleoyloxy)butyl-1-phosphonate (FHBP), a phosphatase-resistant analogue of lysophosphatidic acid (LPA). Importantly LPA and selected LPA analogues like FHBP synergistically cooperate with calcitriol to promote human osteoblast formation and maturation. Results: Herein, we provide evidence that simply immersing titanium in aqueous solutions of FHBP afforded a surface that was superior to unmodified metal at enhancing osteoblast maturation. Importantly, FHBP-functionalised titanium remained stable to 2 years of ambient storage, resisted ∼35 kGy of gamma irradiation and survived implantation into a bone substitute (Sawbone™) and irrigation. Conclusion: The facile step we have taken to modify titanium and the robustness of the final surface finish are appealing properties that are likely to attract the attention of implant manufacturers in the future. The translational potential of this article: We have generated a functionalised titanium (Ti) surface by simply immersing Ti in aqueous solutions of a bioactive lipid. As a facile procedure it will have greater appeal to implant manufacturers compared to onerous and costly developmental processes
Recommended from our members
Provenance of uranium particulate contained within Fukushima Daiichi Nuclear Power Plant Unit 1 ejecta material.
Here we report the results of multiple analytical techniques on sub-mm particulate material derived from Unit 1 of the Fukushima Daiichi Nuclear Power Plant to provide a better understanding of the events that occurred and the environmental legacy. Through combined x-ray fluorescence and absorption contrast micro-focused x-ray tomography, entrapped U particulate are observed to exist around the exterior circumference of the highly porous Si-based particle. Further synchrotron radiation analysis of a number of these entrapped particles shows them to exist as UO2-identical to reactor fuel, with confirmation of their nuclear origin shown via mass spectrometry analysis. While unlikely to represent an environmental or health hazard, such assertions would likely change should break-up of the Si-containing bulk particle occur. However, more important to the long-term decommissioning of the reactors at the FDNPP (and environmental clean-upon), is the knowledge that core integrity of reactor Unit 1 was compromised with nuclear material existing outside of the reactors primary containment
Corrosion of the alloys Magnox AL80, Magnox ZR55 and pure magnesium in air containing water vapour
Investigating the role of microbes in mineral weathering: Nanometre-scale characterisation of the cell-mineral interface using FIB and TEM
Focused ion beam (FIB) sample preparation in combination with subsequent transmission electron microscopy (TEM) analysis are powerful tools for nanometre-scale examination of the cell-mineral interface in bio-geological samples. In this study, we used FIB-TEM to investigate the interaction between a cyanobacterium (Hassallia byssoidea) and a common sheet silicate mineral (biotite) following a laboratory-based bioweathering, incubation experiment. We discuss the FIB preparation of cross-sections of the cell mineral interface for TEM investigation. We also establish an electron fluence threshold (at 200. keV) in biotite for the transition from scanning (S)TEM electron beam induced contamination build up on the surface of biotite thin sections to mass loss, or hole-drilling within the sections. Working below this threshold fluence nanometre-scale structural and elemental information has been obtained from biotite directly underneath cyanobacterial cells incubated on the biotite for 3 months. No physical alteration of the biotite was detected by TEM imaging and diffraction with little or no elemental alteration detected by STEM-energy dispersive X-ray (EDX) elemental line-scanning or by energy filtered TEM (EF-TEM) jump ratio elemental mapping. As such we present evidence that the cyanobacterial strain of H. byssoidea did not cause any measurable alteration of biotite, within the resolution limits of the analysis techniques used, after 3 months of incubation on its surface
The Chinese version of the Gold-MSI: Adaptation and validation of an inventory for the measurement of musical sophistication in a Taiwanese sample
This study presents the Chinese adaptation of the Goldsmiths Musical Sophistication Index (Gold-MSI), an instrument for measuring individual differences in musical ability and skilled musical behaviour. Its psychometric properties were examined with a Taiwanese sample. The Gold-MSI inventory was translated into Chinese following recommendations from the literature on cross-cultural test development. Subsequently, the psychometric properties of the Chinese Gold-MSI self-report inventory, including the Melody Memory Task and the Beat Alignment Perception Task, were evaluated using an online survey with 1,065 participants. Results of confirmatory factor analysis suggest that the original factor structure of the Gold-MSI inventory showed an acceptable fit with the data from the Chinese-speaking sample. In addition, the Chinese Gold-MSI inventory shows good reliability. The Melody Memory Task and the Beat Alignment Perception Task also have sufficient test-retest reliability. Finally, correlations between the Chinese Gold-MSI inventory and the Musical-Rhythmic Intelligence subscale of the Eight Multiple Intelligences Questionnaire as well as the two additional music tests provide evidence for convergent and divergent validity. Overall, the data suggest that the Chinese Gold-MSI has good psychometric properties. Percentile norms for the Gold-MSI inventory and the music tests from the present sample are reported for use in future studies. The present study thus makes a valuable contribution to cross-cultural research in music psychology by enabling the comparison between Chinese and Western studies of individual differences in musical ability
- …