214 research outputs found
Model Pembelajaran Tutor Sebaya Pada Materi Sistem Peredaran Darah Manusia
This study aims to determine the differences in models of peer tutors on learning outcomes in the material of the Human Circulatory System. The method used in this study was experimental guasi with a sample of 100 people divided into two classes namely the control and experiment classes. The results of the study revealed that there were differences in learning outcomes between classes using the model of peer learning with conventional learning models this was evidenced by the value of Asymp. a large (2-tailed) value of 0,000 is generated from the T-test and the n-Gain average value uses peer tutors of 0.73 and a high category and those using the conventional learning model 0.34, the medium categor
Sharp change over from compound nuclear fission to shape dependent quasi fission
Fission fragment mass distribution has been measured from the decay of
Bk nucleus populating via two entrance channels with slight difference
in mass asymmetries but belonging on either side of the Businaro Gallone mass
asymmetry parameter. Both the target nuclei were deformed. Near the Coulomb
barrier, at similar excitation energies the width of the fission fragment mass
distribution was found to be drastically different for the N +
Th reaction compared to the B + U reaction. The entrance
channel mass asymmetry was found to affect the fusion process sharply.Comment: 4 pages,6 figure
COUNTER-UXS ENERGY AND OPERATIONAL ANALYSIS
At present, there exists a prioritization of identifying novel and innovative approaches to managing the small Unmanned Aircraft Systems (sUAS) threat. The near-future sUAS threat to U.S. forces and infrastructure indicates that current Counter-UAS (C-UAS) capabilities and tactics, techniques, and procedures (TTPs) need to evolve to pace the threat. An alternative approach utilizes a networked squadron of unmanned aerial vehicles (UAVs) designed for sUAS threat interdiction. This approach leverages high performance and Size, Weight, and Power (SWaP) conformance to create less expensive, but more capable, C-UAS devices to augment existing capabilities.
This capstone report documents efforts to develop C-UAS technologies to reduce energy consumption and collaterally disruptive signal footprint while maintaining operational effectiveness. This project utilized Model Based System Engineering (MBSE) techniques to explore and assess these technologies within a mission context. A Concept of Operations was developed to provide the C-UAS Operational Concept. Operational analysis led to development of operational scenarios to define the System of Systems (SoS) concept, operating conditions, and required system capabilities. Resource architecture was developed to define the functional behaviors and system performance characteristics for C-UAS technologies. Lastly, a modeling and simulation (M&S) tool was developed to evaluate mission scenarios for C-UAS.Outstanding ThesisCivilian, Department of the NavyCivilian, Department of the NavyCivilian, Department of the NavyCivilian, Department of the NavyCivilian, Department of the NavyApproved for public release. Distribution is unlimited
Acoustics of early universe. I. Flat versus open universe models
A simple perturbation description unique for all signs of curvature, and
based on the gauge-invariant formalisms is proposed to demonstrate that:
(1) The density perturbations propagate in the flat radiation-dominated
universe in exactly the same way as electromagnetic or gravitational waves
propagate in the epoch of the matter domination.
(2) In the open universe, sounds are dispersed by curvature. The space
curvature defines the minimal frequency below which the
propagation of perturbations is forbidden.
Gaussian acoustic fields are considered and the curvature imprint in the
perturbations spectrum is discussed.Comment: The new version extended by 2 sections. Changes in notation. Some
important comments adde
Evolution of density perturbations in a realistic universe
Prompted by the recent more precise determination of the basic cosmological
parameters and growing evidence that the matter-energy content of the universe
is now dominated by dark energy and dark matter we present the general solution
of the equation that describes the evolution of density perturbations in the
linear approximation. It turns out that as in the standard CDM model the
density perturbations grow very slowly during the radiation dominated epoch and
their amplitude increases by a factor of about 4000 in the matter and later
dark energy dominated epoch of expansion of the universe.Comment: 19 pages, 4 figure
Concepts and characteristics of the 'COST Reference Microplasma Jet'
Biomedical applications of non-equilibrium atmospheric pressure plasmas have attracted intense interest in the past few years. Many plasma sources of diverse design have been proposed for these applications, but the relationship between source characteristics and application performance is not well-understood, and indeed many sources are poorly characterized. This circumstance is an impediment to progress in application development. A reference source with well-understood and highly reproducible characteristics may be an important tool in this context. Researchers around the world should be able to compare the characteristics of their own sources and also their results with this device. In this paper, we describe such a reference source, developed from the simple and robust micro-scaled atmospheric pressure plasma jet (μ-APPJ) concept. This development occurred under the auspices of COST Action MP1101 'Biomedical Applications of Atmospheric Pressure Plasmas'. Gas contamination and power measurement are shown to be major causes of irreproducible results in earlier source designs. These problems are resolved in the reference source by refinement of the mechanical and electrical design and by specifying an operating protocol. These measures are shown to be absolutely necessary for reproducible operation. They include the integration of current and voltage probes into the jet. The usual combination of matching unit and power supply is replaced by an integrated LC power coupling circuit and a 5 W single frequency generator. The design specification and operating protocol for the reference source are being made freely available
Toward a Generative Modeling Analysis of CLAS Exclusive 2 Photoproduction
AI-supported algorithms, particularly generative models, have been successfully used in a variety of different contexts. This work employs a generative modeling approach to unfold detector effects specifically tailored for exclusive reactions that involve multiparticle final states. Our study demonstrates the preservation of correlations between kinematic variables in a multidimensional phase space. We perform a full closure test on two-pion photoproduction pseudodata generated with a realistic model in the kinematics of the Jefferson Lab CLAS g11 experiment. The overlap of different reaction mechanisms leading to the same final state associated with the CLAS detector’s nontrivial effects represents an ideal test case for AI-supported analysis. Uncertainty quantification performed via bootstrap provides an estimate of the systematic uncertainty associated with the procedure. The test demonstrates that GANs can reproduce highly correlated multidifferential cross sections even in the presence of detector-induced distortions in the training datasets, and provides a solid basis for applying the framework to real experimental data
Reproducibility of `COST Reference Microplasma Jets'
Atmospheric pressure plasmas have been ground-breaking for plasma science and technologies, due to their significant application potential in many fields, including medicinal, biological, and environmental applications. This is predominantly due to their efficient production and delivery of chemically reactive species under ambient conditions. One of the challenges in progressing the field is comparing plasma sources and results across the community and the literature. To address this a reference plasma source was established during the `Biomedical Applications of Atmospheric Pressure Plasmas' EU COST Action MP1101. It is crucial that reference sources are reproducible. Here, we present the reproducibility and variance across multiple sources through examining various characteristics, including: absolute atomic oxygen densities, absolute ozone densities, electrical characteristics, optical emission spectroscopy, temperature measurements, and bactericidal activity. The measurements demonstrate that the tested COST jets are mainly reproducible within the intrinsic uncertainty of each measurement technique
Controlled production of atomic oxygen and nitrogen in a pulsed radio-frequency atmospheric-pressure plasma
International audienceRadio-frequency driven atmospheric pressure plasmas are efficient sources for the production of reactive species at ambient pressure and close to room temperature. Pulsing the radio-frequency power input provides additional control over species production and gas temperature. Here, we demonstrate the controlled production of highly reactive atomic oxygen and nitrogen in a pulsed radio-frequency ( ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn001.gif] 13.56 MHz) atmospheric-pressure plasma, operated with a small ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn002.gif] 0.1 % air-like admixture ( ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn003.gif] \rm N_2 / ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn004.gif] \rm O_2 at ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn005.gif] 4:1 ) through variations in the duty cycle. Absolute densities of atomic oxygen and nitrogen are determined through vacuum-ultraviolet absorption spectroscopy using the DESIRS beamline at the SOLEIL synchrotron coupled with a high resolution Fourier-transform spectrometer. The neutral-gas temperature is measured using nitrogen molecular optical emission spectroscopy. For a fixed applied-voltage amplitude (234?V), varying the pulse duty cycle from 10% to 100% at a fixed 10?kHz pulse frequency enables us to regulate the densities of atomic oxygen and nitrogen over the ranges of ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn006.gif] (0.18±0.03) ? ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn007.gif] (3.7±0.1)× 10^20 ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn008.gif] \rm m^-3 and ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn009.gif] (0.2±0.06) ? ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn010.gif] (4.4±0.8) × 10^19 ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn011.gif] \rm m^-3 , respectively. The corresponding 11?K increase in the neutral-gas temperature with increased duty cycle, up to a maximum of ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn012.gif] (314±4) K, is relatively small. This additional degree of control, achieved through regulation of the pulse duty cycle and time-averaged power, could be of particular interest for prospective biomedical applications
- …