199 research outputs found
Wavelength calibration of the JWST-MIRI medium resolution spectrometer
We present the wavelength and spectral resolution characterisation of the
Integral Field Unit (IFU) Medium Resolution Spectrometer for the Mid-InfraRed
Instrument (MIRI), to fly onboard the James Webb Space Telescope in 2014. We
use data collected using the Verification Model of the instrument and develop
an empirical method to calibrate properties such as wavelength range and
resolving power in a portion of the spectrometer's full spectral range (5-28
microns). We test our results against optical models to verify the system
requirements and combine them with a study of the fringing pattern in the
instrument's detector to provide a more accurate calibration. We show that
MIRI's IFU spectrometer will be able to produce spectra with a resolving power
above R=2800 in the wavelength range 6.46-7.70 microns, and that the unresolved
spectral lines are well fitted by a Gaussian profile.Comment: 12 pages, submitted to SPIE Proceedings vol. 7731, Space Telescopes
and Instrumentation 2010: Optical, Infrared, and Millimeter Wav
Polymer electrolytes based on modified natural rubber
Modified natural rubber polymer hosts having low transition glass temperatures have been investigated for use in polymer electrolytes. Two types of modified natural rubber, namely 25% epoxidised natural rubber (ENR-25) and 50% epoxidised natural rubber (ENR-50) were employed in conjunction with poly(ethylene oxide), PEO. Results are reported for ionic conductivity and thermal properties for both unplasticized and plasticized polymer electrolyte systems with lithium triflate. The samples were in the form of free standing films with the thickness 0.2–0.5 mm and mixtures of ethylene carbonate (EC) and propylene carbonate (PC) were used as plasticizers. Unplasticized modified natural rubber-based systems exhibit ionic conductivities in the range 10−6 to 10−5 S cm−1 at ambient temperatures. Incorporating 100% of EC/PC by weight fraction of polymer (ENR/PEO) to the systems yielded mechanically stable films and ionic conductivities in the range of 10−4 S cm−1 at ambient temperature
The Mid-Infrared Instrument for the James Webb Space Telescope, V: Predicted Performance of the MIRI Coronagraphs
The imaging channel on the Mid-Infrared Instrument (MIRI) is equipped with
four coronagraphs that provide high contrast imaging capabilities for studying
faint point sources and extended emission that would otherwise be overwhelmed
by a bright point-source in its vicinity. Such bright sources might include
stars that are orbited by exoplanets and circumstellar material, mass-loss
envelopes around post-main-sequence stars, the near-nuclear environments in
active galaxies, and the host galaxies of distant quasars. This paper describes
the coronagraphic observing modes of MIRI, as well as performance estimates
based on measurements of the MIRI flight model during cryo-vacuum testing. A
brief outline of coronagraphic operations is also provided. Finally, simulated
MIRI coronagraphic observations of a few astronomical targets are presented for
illustration
The Origin of the Silicate Emission Features in the Seyfert 2 Galaxy, NGC 2110
The unified model of active galactic nuclei (AGN) predicts silicate emission
features at 10 and 18 microns in type 1 AGN, and such features have now been
observed in objects ranging from distant QSOs to nearby LINERs. More
surprising, however, is the detection of silicate emission in a few type 2 AGN.
By combining Gemini and Spitzer mid-infrared imaging and spectroscopy of NGC
2110, the closest known Seyfert 2 galaxy with silicate emission features, we
can constrain the location of the silicate emitting region to within 32 pc of
the nucleus. This is the strongest constraint yet on the size of the silicate
emitting region in a Seyfert galaxy of any type. While this result is
consistent with a narrow line region origin for the emission, comparison with
clumpy torus models demonstrates that emission from an edge-on torus can also
explain the silicate emission features and 2-20 micron spectral energy
distribution of this object. In many of the best-fitting models the torus has
only a small number of clouds along the line of sight, and does not extend far
above the equatorial plane. Extended silicate-emitting regions may well be
present in AGN, but this work establishes that emission from the torus itself
is also a viable option for the origin of silicate emission features in active
galaxies of both type 1 and type 2.Comment: ApJL, accepte
E-ELT/METIS
The Mid-infrared E-ELT Imager and Spectrograph (METIS) will be one of the first three scientific instruments on the European Extremely Large Telescope (E-ELT). It will be the only instrument to cover the thermal/mid-infrared wavelength range from 3-19 μm. METIS offers a number of scientifically important observing modes, including diffraction-limited imaging, low resolution slit spectroscopy, coronagraphy, and high resolution (R ˜ 100,000) integral field spectroscopy at very high sensitivity. This paper gives a brief summary of METIS and focuses on its unique discovery space in the area of protoplanetary disks, where METIS is quite complementary to ALMA and JWST
The Mid-Infrared Instrument for the James Webb Space Telescope, III: MIRIM, The MIRI Imager
In this article, we describe the MIRI Imager module (MIRIM), which provides
broad-band imaging in the 5 - 27 microns wavelength range for the James Webb
Space Telescope. The imager has a 0"11 pixel scale and a total unobstructed
view of 74"x113". The remainder of its nominal 113"x113" field is occupied by
the coronagraphs and the low resolution spectrometer. We present the instrument
optical and mechanical design. We show that the test data, as measured during
the test campaigns undertaken at CEA-Saclay, at the Rutherford Appleton
Laboratory, and at the NASA Goddard Space Flight Center, indicate that the
instrument complies with its design requirements and goals. We also discuss the
operational requirements (multiple dithers and exposures) needed for optimal
scientific utilization of the MIRIM.Comment: 29 pages, 9 figure
The MIRI Medium Resolution Spectrometer calibration pipeline
The Mid-Infrared Instrument (MIRI) Medium Resolution Spectrometer (MRS) is
the only mid-IR Integral Field Spectrometer on board James Webb Space
Telescope. The complexity of the MRS requires a very specialized pipeline, with
some specific steps not present in other pipelines of JWST instruments, such as
fringe corrections and wavelength offsets, with different algorithms for point
source or extended source data. The MRS pipeline has also two different
variants: the baseline pipeline, optimized for most foreseen science cases, and
the optimal pipeline, where extra steps will be needed for specific science
cases. This paper provides a comprehensive description of the MRS Calibration
Pipeline from uncalibrated slope images to final scientific products, with
brief descriptions of its algorithms, input and output data, and the accessory
data and calibration data products necessary to run the pipeline.Comment: 10 pages, 8 figure
JWST MIRI/MRS in-flight absolute flux calibration and tailored fringe correction for unresolved sources
Context. The Medium Resolution Spectrometer (MRS) is one of the four observing modes of JWST/MIRI. Using JWST in-flight data of unresolved (point) sources, we can derive the MRS absolute spectral response function (ASRF) starting from raw data. Spectral fringing, caused by coherent reflections inside the detector arrays, plays a critical role in the derivation and interpretation of the MRS ASRF. The fringe corrections implemented in the current pipeline are not optimal for non-extended sources, and a high density of molecular features particularly inhibits an accurate correction. Aims. In this paper, we present an alternative way to calibrate the MIRI/MRS data. Firstly, we derive a fringe correction that accounts for the dependence of the fringe properties on the MIRI/MRS pupil illumination and detector pixel sampling of the point spread function. Secondly, we derive the MRS ASRF using an absolute flux calibrator observed across the full 5- 28 \ub5m wavelength range of the MRS. Thirdly, we apply the new ASRF to the spectrum of a G dwarf and compare it with the output of the JWST/MIRI default data reduction pipeline. Finally, we examine the impact of the different fringe corrections on the detectability of molecular features in the G dwarf and K giant. Methods. The absolute flux calibrator HD 163466 (A-star) was used to derive tailored point source fringe flats at each of the default dither locations of the MRS. The fringe-corrected point source integrated spectrum of HD 163466 was used to derive the MRS ASRF using a theoretical model for the stellar continuum. A cross-correlation was run to quantify the uncertainty on the detection of CO, SiO, and OH in the K giant and CO in the G dwarf for different fringe corrections. Results. The point-source-tailored fringe correction and ASRF are found to perform at the same level as the current corrections, beating down the fringe contrast to the sub-percent level in the G dwarf in the longer wavelengths, whilst mitigating the alteration of real molecular features. The same tailored solutions can be applied to other MRS unresolved targets. Target acquisition is required to ensure the pointing is accurate enough to apply this method. A pointing repeatability issue in the MRS limits the effectiveness of the tailored fringe flats is at short wavelengths. Finally, resulting spectra require no scaling to make the sub-bands match, and a dichroic spectral leak at 12.2 \ub5m is removed
- …