Macro and micromechanics analysis of short fiber composites stiffness: The case of old newspaper fibers-polypropylene composites

Stiffness is one of the most relevant characteristics of composite materials. Natural wood fibers have demonstrated their ability to increase the Young's moduli of composite materials, and old newspapers are a potential source of reinforcing fibers for composite materials. There are some micromechanic models to predict the Young's modulus of composite materials, and one of the input data is the intrinsic modulus of their fibers. This intrinsic modulus is a value which is difficult or impossible to measure in the case of wood fibers, due to their measures. This paper evaluates the stiffening abilities of old newspaper fibers and the possibility to back calculate the value of the intrinsic Young's Modulus by means of micromechanic models. Different percentages of old newspaper fibers were compounded with polypropylene (PP). Micromechanics of the fibers were obtained using Hirsch model, Cox-Krenchel's model, Tsai-Pagano model and Halpin-Tsai equations. The most important results were the average intrinsic Young's modulus of the fibers, the mean orientation angle and the mean modulus efficiency factor.Serrano, A.; Espinach, FX.; Tresserras, J.; Rey Tormos, RMD.; Pellicer, N.; Mutje Pujol, P. (2014). Macro and micromechanics analysis of short fiber composites stiffness: The case of old newspaper fibers-polypropylene composites. Materials and Design. 55:319-324. doi:10.1016/j.matdes.2013.10.011S3193245

The Miniaturized Moessbauer Spectrometers MIMOS II on MER: Four Years of Operation - A Summary

The two Miniaturized Moessbauer Spectrometers (MIMOS II) on board the two Mars Exploration Rovers Spirit and Opportunity have now been collecting important scientific data for more than four years. The spectrometers provide information about Fe-bearing mineral phases and determine Fe oxidation states. The total amount of targets analized exceeds 600, the total integration time exceeds 260 days for both rovers. Since landing, more than five half-lives of the Co-57 MB sources have past (intensity at the time of landing approx. 150 mCi). Current integration times are about 50 hours in order to achieve reasonable statistics as opposed to 8 hours at the beginning of the mission. In total, 13 different mineral phases were detected: Olivine, pyroxene, hematite, magnetite and nanophase ferric oxide were detected at both landing sites. At Gusev, ilmenite, goethite, a ferric sulfate phase and a yet unassigned phase (in the rock Fuzzy Smith) were detected. At Meridiani, jarosite, metallic iron in meteoritic samples (kamacite), troilite, and an unassigned ferric phase were detected. Jarosite and goethite are of special interest, as these minerals are indicators for water activity. In this abstract, an overview of Moessbauer results will be given, with a focus on data obtained since the last martian winter. The MER mission has proven that Moessbauer spectroscopy is a valuable tool for the in situ exploration of extraterrestrial bodies and for the study of Febearing samples. The experience gained through the MER mission makes MIMOS II a obvious choice for future missions to Mars and other targets. Currently, MIMOS II is on the scientific payload of two approved future missions: Phobos Grunt (Russian Space Agency; 2009) and ExoMars (European Space Agency; 2013)

Natural fiber-reinforced thermoplastic starch composites obtained by melt processing

Thermoplastic starch (TPS) from industrial non-modified corn starch was obtained and reinforced with natural strands. The influence of the reinforcement on physical-chemical properties of the composites obtained by melt processing has been analyzed. For this purpose, composites reinforced with different amounts of either sisal or hemp strands have been prepared and evaluated in terms of crystallinity, water sorption, thermal and mechanical properties. The results showed that the incorporation of sisal or hemp strands caused an increase in the glass transition temperature (T-g) of the TPS as determined by DMTA. The reinforcement also increased the stiffness of the material, as reflected in both the storage modulus and the Young's modulus. Intrinsic mechanical properties of the reinforcing fibers showed a lower effect on the final mechanical properties of the materials than their homogeneity and distribution within the matrix. Additionally, the addition of a natural latex plasticizer to the composite decreased the water absorption kinetics without affecting significantly the thermal and mechanical properties of the material. (c) 2012 Elsevier Ltd. All rights reserved

Soda-Treated Sisal/Polypropylene Composites

Treated sisal fibers were used as reinforcement of polypropylene (PP) composites, with maleic anhydride-grafted PP (MAPP) as coupling agent. The composites were made by melting processing of PP with the fiber in a heated roller followed by multiple extrusions in a single-screw extruder. Injection molded specimens were produced for the characterization of the material. In order to improve the adhesion between fiber and matrix and to eliminate odorous substances, sisal fibers were treated with boiling water and with NaOH solutions at 3 and 10 wt.%. The mechanical properties of the composites were assessed by tensile, bend and impact tests. Additionally, the morphology of the composites and the adhesion at he fiber-matrix interface were analyzed by SEM. The fiber treatment led to very light and odorless materials, with yields of 95, 74 and 62 wt.% for treatments with hot water, 3 and 10 wt.% soda solution respectively. Fiber treatment caused an appreciable change in fiber characteristics, yet the mechanical properties under tensile and flexural tests were not influenced by that treatment. Only the impact strength increased in the composites with alkali-treated sisal fibers.Capes-MECD-DGU[HBE2003-0008]MECD-DGUCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)UdGUd

In vitro effect of putty calcium silicate materials on human periodontal ligament stem cells

New bioactive materials have been developed for retrograde root filling. These materials come into contact with vital tissues and facilitate biomineralization and apical repair. The objective of this study was to evaluate the cytocompatibility and bioactivity of two bioactive cements, Bio-C Repair (Angelus, Londrina, Pr, Brazil) and TotalFill BC RRM putty (FGK, Dentaire SA, La-Chaux-de-fonds, Switzerland). The biological properties in human periodontal ligament stem cells (hPDLSCs) that were exposed to Bio-C Repair and TotalFill BC RRM putty were studied. Cell viability, migration, and cell adhesion were analyzed. Moreover, qPCR and mineralization assay were performed to evaluate the bioactivity potential of these cements. The results were statistically analyzed using ANOVA and the Tukey test (p < 0.05). It was observed that cell viability and cell migration in Bio-C Repair and TotalFill BC RRM putty were similar to the control without statistically significant differences, except at 72 h when TotalFill BC RRM putty was slightly lower (p < 0.05). Excellent cell adhesion and morphology were observed with both Bio-C Repair and TotalFill BC RRM putty. Both cements promoted the osteo- and cementogenic differentiation of hPDLSCs. These results suggest that Bio-C Repair and TotalFill BC RRM putty are biologically appropriate materials to be used as retrograde obturation material

First evidence of the Hepatitis E virus in environmental waters in Colombia

RESUMEN: Hepatitis E virus (HEV) is one of the main causes of acute viral hepatitis of enteric transmission. HEV has been detected in environmental samples in several countries from Europe and Asia, constituting a risk factor for waterborne infection. In Colombia, HEV has been identified in samples obtained from patients as well as from swine, but no environmental studies have been carried out. To determine if HEV is present in environmental waters, samples from the main source of drinking water plant and of wastewater system of eight municipalities and two villages of Antioquia state (North West Colombia), were collected between December 2012 and April 2014. The HEV genome was detected by RT-PCR in 23.3% (7/30) of the samples from the main source of drinking water plants and in 16.7% (5/30) from sewage. Viral concentrates obtained from three positive sewage samples were used to inoculate HepG2 cell cultures that were followed for one month; however, the viral genome was not detected in any cell culture. This study demonstrates the circulation of HEV in both source of drinking water plants and wastewater in Antioquia state, Colombia. The presence of HEV in environmental waters could be a risk for waterborne transmission in this population. The findings of the present study, together with the evidence of HEV circulation in human and swine in Colombia, should be consider by public health authorities for the development of surveillance programs and the inclusion of HEV infection diagnosis in the guidelines of viral hepatitis in the country. This is the first report of HEV in environmental samples in Colombia and the second one in Latin America