67 research outputs found
Interferometric modeling of wave propagation in inhomogeneous elastic media using time reversal and reciprocity
Time-reversal and Interferometry with applications to forward modeling of wave propagation and a chapter on receiver functions
In exploration seismics and non-destructive evaluation, acoustic, elastic and
electro-magnetic waves sensitive to inhomogeneities in the medium under investigation are used to probe its interior. Waves multiply scattered by the inhomogeneities carry significant information but, due to their non-linear relation
with the inhomogeneities, are notoriously dificult to image or invert for subsurface structure. Recently, however, this paradigm may have been broken as it was
shown that high-order multiply scattered acoustic waves can be time-reversed and
focused onto their original source location through arbitrary, unknown, inhomogeneous media using a so-called time-reversal mirror: in a first step, the multiply
scattered waves are recorded on an array of transducers partially surrounding
the medium, in the second step the recorded wavefields are time-reversed and reemitted into the medium (i.e., the time-reversal mirror acts as a linear boundary
condition on the medium injecting the time-reversed, multiply scattered wave-
field). The multiply scattered waves retrace their paths through the medium and
focus on the original source location. In another development the full waveform
Green's function between two (passive) receivers has been observed to emerge
from crosscorrelation of multiply scattered coda waves. This process is called
interferometry. The principal aim of this thesis is to explore the relation between
time-reversal and interferometry and to apply the resulting insights to forward
modelling of wave propagation in the broader context of inversion. A secondary
aim is to see if the seismological receiver function method can be applied to a
reflection setting in ways that are both dynamically and kinematically correct.
These aims are achieved through: (1) Derivation of an integral representation
for the time-reversed wavefield in arbitrary points of an inhomogeneous medium
[first, for the acoustic case, based on the Kirchhoff-Helmholtz integral, then for
the elastic case based on the Betti-Rayleigh reciprocity theorem]. Evaluation of these integral representations for points other than the original source point will
be shown to give rise to the Green's function between the two points. Physically
intuitive explanations will be given as to why this is the case. (2) Application of
ordinary reciprocity to the integral representation for the time-reversed wavefield
to get an expression in terms of sources on the surrounding surface only. This
gives rise to an efficient and flexible forward modeling algorithm. By illuminating
the medium from the surrounding surface and storing full waveforms in as many
points in the interior as possible, full waveform Green's functions between arbitrary points in the volume can be computed by cross correlation and summation
only. (3) Derivation of an exact, interferometric von Neumann type boundary
condition for arbitrary interior perturbed scattering problems. The exact bound-
ary condition correctly accounts for all orders of multiple scattering, both inside
the scattering perturbation(s) and between the perturbations and the background
model and thus includes all so-called higher-order, long-range interactions. (4)
A comprehensive study of the receiver function method in a reflection setting,
both kinematically and dynamically. All presented results are verified and illustrated by numerical (finite-difference) modelling. Overall, the results in this thesis
demonstrate that, while the original instabilities associated with direct inversion
remain, multiply scattered waves can be used in an industrial context { both
in real-life experiments and in forward modelling { in ways that are stable. The
presented advances in forward modelling are argued to have a significant impact
on inversion as well, albeit indirectly
Waves in space-dependent and time-dependent materials: a systematic comparison
Waves in space-dependent and time-dependent materials obey similar wave
equations, with interchanged time- and space-coordinates. However, since the
causality conditions are the same in both types of material (i.e., without
interchangement of coordinates), the solutions are dissimilar.
We present a systematic treatment of wave propagation and scattering in 1D
space-dependent and time-dependent materials. After a review of reflection and
transmission coefficients, we discuss Green's functions and simple wave field
representations for both types of material. Next we discuss propagation
invariants, i.e., quantities that are independent of the space coordinate in a
space-dependent material (such as the net power-flux density) or of the time
coordinate in a time-dependent material (such as the net field-momentum
density). A discussion of reciprocity theorems leads to the well-known
source-receiver reciprocity relation for the Green's function of a
space-dependent material and a new source-receiver reciprocity relation for the
Green's function of a time-dependent material. A discussion of general wave
field representations leads to the well-known expression for Green's function
retrieval from the correlation of passive measurements in a space-dependent
material and a new expression for Green's function retrieval in a
time-dependent material.
After an introduction of a matrix-vector wave equation, we discuss propagator
matrices for both types of material. Since the initial condition for a
propagator matrix in a time-dependent material follows from the boundary
condition for a propagator matrix in a space-dependent material by
interchanging the time- and space-coordinates, the propagator matrices for both
types of material are interrelated in the same way. This also applies to
representations and reciprocity theorems involving propagator matrices.Comment: 41 pages, 5 figure
Finite-difference modelling of wavefield constituents
The finite-difference method is among the most popular methods for modelling seismic wave propagation. Although the method has enjoyed huge success for its ability to produce full wavefield seismograms in complex models, it has one major limitation which is of critical importance for many modelling applications; to naturally output up- and downgoing and P- and S-wave constituents of synthesized seismograms. In this paper, we show how such wavefield constituents can be isolated in finite-difference-computed synthetics in complex models with high numerical precision by means of a simple algorithm. The description focuses on up- and downgoing and P- and S-wave separation of data generated using an isotropic elastic finite-difference modelling method. However, the same principles can also be applied to acoustic, electromagnetic and other wave equation
Closed-aperture unbounded acoustics experimentation using multidimensional deconvolution
In physical acoustic laboratories, wave propagation experiments often suffer from unwanted reflections at the boundaries of the experimental setup. We propose using multidimensional deconvolution (MDD) to post-process recorded experimental data such that the scattering imprint related to the domain boundary is completely removed and only the Green's functions associated with a scattering object of interest are obtained. The application of the MDD method requires in/out wavefield separation of data recorded along a closed surface surrounding the object of interest, and we propose a decomposition method to separate such data for arbitrary curved surfaces. The MDD results consist of the Green's functions between any pair of points on the closed recording surface, fully sampling the scattered field. We apply the MDD algorithm to post-process laboratory data acquired in a two-dimensional acoustic waveguide to characterize the wavefield scattering related to a rigid steel block while removing the scattering imprint of the domain boundary. The experimental results are validated with synthetic simulations, corroborating that MDD is an effective and general method to obtain the experimentally desired Green's functions for arbitrary inhomogeneous scatterers
Identifying Multiply-Scattered Wavepaths in Strongly Scattering and DispersiveMedia
The ability to extract information from scattered waves is usually limited to singly scattered energy even if multiple scattering might occur in the medium. As a result, the information in arrival times of higher-order scattered events is underexplored. This information is extracted using fingerprinting theory. This theory has never previously been applied successfully to real measurements, particularly when the medium is dispersive. The theory is used to estimate the arrival times and scattering paths of multiply scattered waves in a thin sheet using an automated scheme in a dispersive medium by applying an additional dispersion compensation method. Estimated times and paths are compared with predictions based on a sequence of straight ray paths for each scattering event given the known scatterer locations. Additionally, numerical modelling is performed to verify the interpretations of the compensated data. Since the source also acts as a scatterer in these experiments, initially, the predictions and the numerical results did not conform to the experimental observations. By reformulating the theory and the processing scheme and adding a source scatterer in the modelling, it is shown that predictions of all observed scattering events are possible with both prediction methods, verifying that the methods are both effective and practically achievable. Applied Geophysics and Petrophysic
- …