27 research outputs found
The structure of volcanic cristobalite in relation to its toxicity; relevance for the variable crystalline silica hazard
BACKGROUND: Respirable crystalline silica (RCS) continues to pose a risk to human health worldwide. Its variable toxicity depends on inherent characteristics and external factors which influence surface chemistry. Significant population exposure to RCS occurs during volcanic eruptions, where ashfall may cover hundreds of square km and exposure may last years. Occupational exposure also occurs through mining of volcanic deposits. The primary source of RCS from volcanoes is through collapse and fragmentation of lava domes within which cristobalite is mass produced. After 30 years of research, it is still not clear if volcanic ash is a chronic respiratory health hazard. Toxicological assays have shown that cristobalite-rich ash is less toxic than expected. We investigate the reasons for this by determining the physicochemical/structural characteristics which may modify the pathogenicity of volcanic RCS. Four theories are considered: 1) the reactivity of particle surfaces is reduced due to co-substitutions of Al and Na for Si in the cristobalite structure; 2) particles consist of aggregates of cristobalite and other phases, restricting the surface area of cristobalite available for reactions in the lung; 3) the cristobalite surface is occluded by an annealed rim; 4) dissolution of other volcanic particles affects the surfaces of RCS in the lung. METHODS: The composition of volcanic cristobalite crystals was quantified by electron microprobe and differences in composition assessed by Welch's two sample t-test. Sections of dome-rock and ash particles were imaged by scanning and transmission electron microscopy, and elemental compositions of rims determined by energy dispersive X-ray spectroscopy. RESULTS: Volcanic cristobalite contains up to 4 wt. % combined Al(2)O(3) and Na(2)O. Most cristobalite-bearing ash particles contain adhered materials such as feldspar and glass. No annealed rims were observed. CONCLUSIONS: The composition of volcanic cristobalite particles gives insight into previously-unconsidered inherent characteristics of silica mineralogy which may affect toxicity. The structural features identified may also influence the hazard of other environmentally and occupationally produced silica dusts. Current exposure regulations do not take into account the characteristics that might render the silica surface less harmful. Further research would facilitate refinement of the existing simple, mass-based silica standard by taking into account composition, allowing higher standards to be set in industries where the silica surface is modified.Natural Environment Research Council (NERC)Moyes Foundation - studentshi
The α–β phase transition in volcanic cristobalite
Cristobalite is a common mineral in volcanic ash produced from dome-forming eruptions. Assessment of the respiratory hazard posed by volcanic ash requires understanding the nature of the cristobalite it contains. Volcanic cristobalite contains coupled substitutions of Al3+ and Na+ for Si4+; similar co-substitutions in synthetic cristobalite are known to modify the crystal structure, affecting the stability of the [alpha] and [beta] forms and the observed transition between them. Here, for the first time, the dynamics and energy changes associated with the [alpha]-[beta] phase transition in volcanic cristobalite are investigated using X-ray powder diffraction with simultaneous in situ heating and differential scanning calorimetry. At ambient temperature, volcanic cristobalite exists in the [alpha] form and has a larger cell volume than synthetic [alpha]-cristobalite; as a result, its diffraction pattern sits between ICDD [alpha]- and [beta]-cristobalite library patterns, which could cause ambiguity in phase identification. On heating from ambient temperature, volcanic cristobalite exhibits a lower degree of thermal expansion than synthetic cristobalite, and it also has a lower [alpha]-[beta] transition temperature (~473 K) compared with synthetic cristobalite (upwards of 543 K); these observations are discussed in relation to the presence of Al3+ and Na+ defects. The transition shows a stable and reproducible hysteresis loop with [alpha] and [beta] phases coexisting through the transition, suggesting that discrete crystals in the sample have different transition temperatures
Estimates of volcanic mercury emissions from Redoubt Volcano, Augustine Volcano, and Mount Spurr eruption ash
Ash is a potential sink of volcanically sourced atmospheric mercury (Hg), and the concentration of particle-bound Hg may provide constraints on Hg emissions during eruptions. We analyze Hg concentrations in 227 bulk ash samples from the Mount Spurr (1992), Redoubt Volcano (2009), and Augustine Volcano (2006) volcanic eruptions to investigate large-scale spatial, temporal, and volcanic-source trends. We find no significant difference in Hg concentrations in bulk ash by distance or discrete eruptive events at each volcano, suggesting that in-plume reactions converting gaseous Hg0 to adsorbed Hg2+ are happening on shorter timescales than considered in this study (minutes) and any additional in-plume controls are not discernable within intra-volcanic sample variability. However, we do find a significant difference in Hg concentration of ash among volcanic sources, which indicates that volcanoes may emit comparatively high or low quantities of Hg. We combine our Hg findings with total mass estimates of ashfall deposits to calculate minimum, first-order Hg emissions of 8.23 t Hg for Mount Spurr (1992), 1.25 t Hg for Redoubt Volcano (2009), and 0.16 t Hg for Augustine Volcano (2006). In particular, we find that Mount Spurr is a high Hg emitting volcano, and that its 1992 particulate Hg emissions likely contributed substantially to the global eruptive volcanic Hg budget for that year. Based on our findings, previous approaches that use long-term Hg/SO2 mass ratios to estimate eruptive total Hg under-account for Hg emitted in explosive events, and global volcanogenic Total Hg estimates need revisiting
Assessment of leachable elements in volcanic ashfall : a review and evaluation of a standardized protocol for ash hazard characterization.
Volcanic ash presents a widespread and common hazard during and after eruptions. Complex interactions between solid ash surfaces and volcanic gases lead to the formation of soluble salts that may be mobilized in aqueous environments. A variety of stakeholders may be concerned about the effects of ash on human and animal health, drinking water supplies, crops, soils and surface runoff. As part of the immediate emergency response, rapid dissemination of information regarding potentially hazardous concentrations of soluble species is critical. However, substantial variability in the methods used to characterize leachable elements makes it challenging to compare datasets and eruption impacts. To address these challenges, the International Volcanic Health Hazard Network (www.ivhhn.org) organized a two-day workshop to define appropriate methods for hazard assessment. The outcome of this workshop was a ‘consensus protocol’ for analysis of volcanic ash samples for rapid assessment of hazards from leachable elements, which was subsequently ratified by leading volcanological organizations. The purpose of this protocol is to recommend clear, standard and reliable methods applicable to a range of purposes during eruption response, such as assessing impacts on drinking-water supplies and ingestion hazards to livestock, and also applicable to research purposes. Where possible, it is intended that the methods make use of commonly available equipment and require little training. To evaluate method transferability, an interlaboratory comparison exercise was organized among six laboratories worldwide. Each laboratory received a split of pristine ash, and independently analyzed it according to the protocol for a wide range of elements. Collated results indicate good repeatability and reproducibility for most elements, thus indicating that the development of this protocol is a useful step towards providing standardized and reliable methods for ash hazard characterization. In this article, we review recent ash leachate studies, report the outcomes of the comparison exercise and present a revised and updated protocol based on the experiences and recommendations of the exercise participants. The adoption of standardized methods will improve and facilitate the comparability of results among studies and enable the ongoing development of a global database of leachate information relevant for informing volcanic health hazards assessment
A reappraisal of explosive–effusive silicic eruption dynamics: syn-eruptive assembly of lava from the products of cryptic fragmentation
Silicic volcanic eruptions range in style from gently effusive to highly explosive, and may switch style unpredictably during a single eruption. Direct observations of subaerial rhyolitic eruptions (Chaiten 2008, Cordón Caulle 2011–2012, Chile) challenged long-standing paradigms of explosive and effusive eruptive styles and led to the formulation of new models of hybrid activity. However, the processes that govern such hybrid explosive–effusive activity remain poorly understood. Here, we bring together observations of the well-studied 2011–2012 Cordón Caulle eruption with new textural and petrologic data on erupted products, and video and still imagery of the eruption. We infer that all of the activity – explosive, effusive, and hybrid – was fed by explosive fragmentation at depth, and that effusive behaviour arose from sticking and sintering, in the shallow vent region, of the clastic products of deeper, cryptic fragmentation. We use a scaling approach to determine that there is sufficient time available, during emplacement, for diffusive pyroclast degassing and sintering to produce a degassed plug that occludes the shallow conduit, feeding clastogenic, apparently effusive, lava-like deposits. Based on evidence from Cordón Caulle, and from other similar eruptions, we further argue that hybrid explosive–effusive activity is driven by episodic gas-fracking of the occluding lava plug, fed by the underlying pressurized ash- and pyroclast-laden region. The presence of a pressurized pocket of ash-laden gas within the conduit provides a mechanism for generation of harmonic tremor, and for syn-eruptive laccolith intrusion, both of which were features of the Cordón Caulle eruption. We conclude that the cryptic fragmentation models is more consistent with available evidence than the prevailing model for effusion of silicic lava that assume coherent non-fragmental rise of magma from depth to the surface without wholesale explosive fragmentation
Assessment of the potential respiratory hazard of volcanic ash from future Icelandic eruptions: a study of archived basaltic to rhyolitic ash samples
Volcanic Ash Activates the NLRP3 Inflammasome in Murine and Human Macrophages
Volcanic ash is a heterogeneous mineral dust that is typically composed of a mixture of amorphous (glass) and crystalline (mineral) fragments. It commonly contains an abundance of the crystalline silica (SiO2) polymorph cristobalite. Inhalation of crystalline silica can induce inflammation by stimulating the NLRP3 inflammasome, a cytosolic receptor complex that plays a critical role in driving inflammatory immune responses. Ingested material results in the assembly of NLRP3, ASC, and caspase-1 with subsequent secretion of the interleukin-1 family cytokine IL-1β. Previous toxicology work suggests that cristobalite-bearing volcanic ash is minimally reactive, calling into question the reactivity of volcanically derived crystalline silica, in general. In this study, we target the NLRP3 inflammasome as a crystalline silica responsive element to clarify volcanic cristobalite reactivity. We expose immortalized bone marrow-derived macrophages of genetically engineered mice and primary human peripheral blood mononuclear cells (PBMCs) to ash from the Soufrière Hills volcano as well as representative, pure-phase samples of its primary componentry (volcanic glass, feldspar, cristobalite) and measure NLRP3 inflammasome activation. We demonstrate that respirable Soufrière Hills volcanic ash induces the activation of caspase-1 with subsequent release of mature IL-1β in a NLRP3 inflammasome-dependent manner. Macrophages deficient in NLRP3 inflammasome components are incapable of secreting IL-1β in response to volcanic ash ingestion. Cellular uptake induces lysosomal destabilization involving cysteine proteases. Furthermore, the response involves activation of mitochondrial stress pathways leading to the generation of reactive oxygen species. Considering ash componentry, cristobalite is the most reactive pure-phase with other components inducing only low-level IL-1β secretion. Inflammasome activation mediated by inhaled ash and its potential relevance in chronic pulmonary disease was further evidenced in PBMC using the NLRP3 small-molecule inhibitor CP-456,773 (CRID3, MCC950). Our data indicate the functional activation of the NLRP3 inflammasome by volcanic ash in murine and human macrophages in vitro. Cristobalite is identified as the apparent driver, thereby contesting previous assertions that chemical and structural imperfections may be sufficient to abrogate the reactivity of volcanically derived cristobalite. This is a novel mechanism for the stimulation of a pro-inflammatory response by volcanic particulate and provides new insight regarding chronic exposure to environmentally occurring particles
USGS and social media user dialogue and sentiment during the 2018 eruption of Kīlauea Volcano, Hawai‘i
Responsive and empathic communication by scientists is critical for building trust and engagement with communities, which, in turn, promotes receptiveness toward authoritative hazard information during times of crisis. The 2018 eruption of Hawai‘i's Kīlauea Volcano was the first volcanic crisis event in which communication via the U.S. Geological Survey (USGS) social media group, “USGS Volcanoes,” played a major role in providing eruption information to publics. Providing a concrete assessment of the social media effort during the eruption is necessary for optimizing future social media hazard crisis communication. We present qualitative and quantitative analyses of USGS Volcanoes' Facebook posts and over 22,000 follow-on comments spanning the 2018 eruption. Our analyses reveal that, for the 16 posts with the highest user engagement, USGS Volcanoes and informed non-USGS users directly answered 73% of questions and directly corrected or called out inaccuracies in over 54% of comments containing misinformation. User sentiments were 66% positive on average per comment thread regarding eruption information, and user feedback toward USGS Volcanoes, USGS scientists, or the Hawaiian Volcano Observatory was 86% positive on average. Quantitative sentiment analysis reveals a 61% correlation between users' overall expressed sentiments and frequency of the word “thank,” providing further evidence that social media engagement by USGS Volcanoes and informed users positively impacted collective user sentiment. Themes emerging from our qualitative thematic analysis illustrate how communication strategies employed by USGS Volcanoes successfully engaged and benefitted users, providing insights for communicating with publics on social media during crisis situations