Managing the mining cycle using GeoVisionary

Managing the mining cycle from exploration through to evaluation, planning, construction, operation and finally mine closure can involve many datasets in different formats. To be able to visualise all of these different datasets in one environment is important to locate mineral/ore deposits, moderate risks, increase mining efficiency, monitor the impact on the surrounding environment and communicate these factors to stakeholders. Typically, GIS – Geographical Information Systems have been used to manage the life cycle of a mine, however the three dimensional (3D) complexity is lost in these two dimensional (2D) systems. Virtalis alongside the British Geological Survey, have developed the GeoVisionary software which provides the means to aid the management of many aspects of the life cycle of a mine using a combination 2D, 3D and 4D data in the same virtual environment

Tau Be or not Tau Be? - A Perspective on Service Compatibility and Substitutability

One of the main open research issues in Service Oriented Computing is to propose automated techniques to analyse service interfaces. A first problem, called compatibility, aims at determining whether a set of services (two in this paper) can be composed together and interact with each other as expected. Another related problem is to check the substitutability of one service with another. These problems are especially difficult when behavioural descriptions (i.e., message calls and their ordering) are taken into account in service interfaces. Interfaces should capture as faithfully as possible the service behaviour to make their automated analysis possible while not exhibiting implementation details. In this position paper, we choose Labelled Transition Systems to specify the behavioural part of service interfaces. In particular, we show that internal behaviours (tau transitions) are necessary in these transition systems in order to detect subtle errors that may occur when composing a set of services together. We also show that tau transitions should be handled differently in the compatibility and substitutability problem: the former problem requires to check if the compatibility is preserved every time a tau transition is traversed in one interface, whereas the latter requires a precise analysis of tau branchings in order to make the substitution preserve the properties (e.g., a compatibility notion) which were ensured before replacement.Comment: In Proceedings WCSI 2010, arXiv:1010.233

Microneedle assisted transdermal delivery of zolmitriptan: effect of microneedle geometry, in vitro permeation experiments, scaling analyses and numerical simulations

Objective: The present study was aimed to investigate the effect of salient microneedle (MN) geometry parameters like length, density, shape and type on transdermal permeation enhancement of Zolmitriptan (ZMT). Methods: Two types of MN devices viz. AdminPatch® arrays (ADM) (0.6, 0.9, 1.2 and 1.5mm lengths) and laboratory fabricated polymeric MNs (PM) of 0.6mm length were employed. In the case of PMs, arrays were applied thrice at different places within a 1.77cm2 skin area (PM-3) to maintain the MN density closer to 0.6mm ADM. Scaling analyses was done using dimensionless parameters like concentration of ZMT (Ct/Cs), thickness (h/L) and surface area of the skin (Sa/L2). Results: Micro-injection moulding technique was employed to fabricate PM. Histological studies revealed that the PM, owing to their geometry/design, formed wider and deeper microconduits when compared to ADM of similar length. Approximately 3.17 and 3.65 fold increase in ZMT flux values were observed with 1.5mm ADM and PM-3 applications when compared to the passive studies. Good correlations were observed between different dimensionless parameters with scaling analyses. Numerical simulations, using MATLAB and COMSOL software, based on experimental data and histological images provided information regarding the ZMT skin distribution after MN application. Discussion: Both from experimental studies and simulations, it was inferred that PM were more effective in enhancing the transdermal delivery of ZMT when compared to ADM. Conclusion: The study suggests that MN application enhances the ZMT transdermal permeation and the geometrical parameters of MNs play an important role in the degree of such enhancement

Effect of microneedle type on transdermal permeation of rizatriptan

The present study was aimed to investigate the effect of salient microneedle (MN) geometry parameters like length, density, shape and type on transdermal permeation of rizatriptan (RIZ). Studies were carried out using two types of MN devices viz. AdminPatch® arrays (ADM) (0.6, 0.9, 1.2 and 1.5 mm lengths) and laboratory-fabricated polymeric MNs (PMs) of 0.6 mm length. In the case of the PMs, arrays were applied three times at different places within a 1.77-cm2 skin area (PM-3) to maintain the MN density closer to 0.6 mm ADM. Histological studies revealed that PM, owing to their geometry/design, formed wider and deeper microconduits when compared to ADM of similar length. Approximately 4.9- and 4.2-fold increases in the RIZ steady-state flux values were observed with 1.5 mm ADM and PM-3 applications when compared to the passive studies. A good correlation between different dimensionless parameters like the amount of RIZ permeated (Ct/Cs), thickness (h/L) and surface area (Sa/L2) of the skin was observed with scaling analyses. Numerical simulations provided further information regarding the distribution of RIZ in MN-treated skin after application of different MNs. Overall, the study suggests that MN application enhances the RIZ transdermal permeation and the geometrical parameters of MNs play an important role in the degree enhancement

Enantioselective Synthesis of Antiepileptic Drug: (-)-Levetiracetam-Synthetic Applications of the Versatile New Chiral N-Sul�nimine

We report an asymmetric synthesis of (-)-Levetiracetam (1) in six steps starting from versatile new chiral N-sul�nimine (3). e key step, stereoselective 1,2-addition of ethylmagnesium bromide (EtMgBr) to chiral N-sul�nimine derived from (R)-glyceraldehyde acetonide and (S)-t-BSA, gave the corresponding sulfonamide (2) in high diastereoselectivity. Simultaneous deprotection and deacetylation followed by NaIO 4 cleavage and reduction gave -amino alcohol (6). Subsequent reactions yielded the targeted compound levetiracetam (1)

Bone geometry in older adults with subclinical hypothyroidism upon levothyroxine therapy: A nested study within a randomized placebo controlled trial

The effect of levothyroxine (LT4) therapy for subclinical hypothyroidism (SHypo) on appendicular bone geometry and volumetric density has so far not been studied. In a nested study within the randomized, placebo-controlled Thyroid Hormone Replacement for Subclinical Hypothyroidism (TRUST) trial, we assessed the effect of LT4 therapy on bone geometry as measured by peripheral quantitative computed tomography (pQCT). In the TRUST trial, community-dwelling adults aged ≥65 years with SHypo were randomized to LT4 with dose titration vs. placebo with mock titration. We analyzed data from participants enrolled at the TRUST site in Bern, Switzerland who had bone pQCT measured at baseline and at 1 to 2 years follow-up. The primary outcomes were the annual percentage changes of radius and tibia epi- and diaphysis bone geometry (total and cortical cross-sectional area (CSA) and cortical thickness), and of volumetric bone mineral density (bone mineral content (BMC) and total, trabecular and cortical volumetric bone mineral density (vBMD)). We performed linear regression of the annual percentage changes adjusted for sex, LT4 dose at randomization and muscle cross-sectional area. The 98 included participants had a mean age of 73.9 (±SD 5.4) years, 45.9% were women, and 12% had osteoporosis. They were randomized to placebo (n = 48) or LT4 (n = 50). Annual changes in BMC and vBMD were similar between placebo and LT4-treated groups, without significant difference in bone geometry or volumetric bone mineral density changes, neither at the diaphysis, nor at the epiphysis. For example, in the placebo group, epiphyseal BMC (radius) decreased by a mean 0.2% per year, with a similar decrease of 0.5% per year in the LT4 group (between-group difference in %ΔBMC 0.3, 95% CI –0.70 to 1.21, p = 0.91). Compared to placebo, LT4 therapy for an average 14 months had no significant effect on bone mass, bone geometry and volumetric density in older adults with subclinical hypothyroidism. Trial registration: The trial was registered on ClinicalTrials.gov numbers NCT01660126 (TRUST Thyroid trial) and NCT02491008 (Skeletal outcomes)

Pore-scale modeling of fluid flow through gas diffusion and catalyst layers for high temperature proton exchange membrane (HT-PEM) fuel cells

This work represents a step towards reliable algorithms for reconstructing the micromorphology of electrode materials of high temperature proton exchange membrane fuel cells and for performing pore-scale simulations of fluid flow (including rarefaction effects). In particular, we developed a deterministic model for a woven gas diffusion layer (GDL) and a stochastic model for the catalyst layer (CL) based on clusterization of carbon particles. We verified that both of the models developed accurately recover the experimental values of the permeability, without any special ad hoc tuning. Moreover, we investigated the effect of catalyst particle distributions inside the CL on the degree of clusterization and on the microscopic fluid flow, which is relevant for the modeling of degradation (e.g. loss of phosphoric acid). The three-dimensional pore-scale simulations of the fluid flow for the direct numerical calculation of the permeability were performed by the lattice Boltzmann method (LBM

Indução da atividade fagocitária e produção de óxido nítrico numa população natural de Trypanosoma cruzi I e II do Estado do Paraná, Brasil

Twelve strains of Trypanosoma cruzi isolated from wild reservoirs, triatomines, and chronic chagasic patients in the state of Paraná, southern Brazil, and classified as T. cruzi I and II, were used to test the correlation between genetic and biological diversity. The Phagocytic Index (PI) and nitric-oxide (NO) production in vitro were used as biological parameters. The PI of the T. cruzi I and II strains did not differ significantly, nor did the PI of the T. cruzi strains isolated from humans, triatomines, or wild reservoirs. There was a statistical difference in the inhibition of NO production between T. cruzi I and II and between parasites isolated from humans and the strains isolated from triatomines and wild reservoirs, but there was no correlation between genetics and biology when the strains were analyzed independently of the lineages or hosts from which the strains were isolated. There were significant correlations for Randomly Amplified Polymorphic Deoxyribonucleic acid (RAPD) and biological parameters for T. cruzi I and II, and for humans or wild reservoirs when the lineages or hosts were considered individually.Doze cepas de Trypanosoma cruzi isoladas de reservatórios silvestres, triatomíneos e de pacientes chagásicos crônicos do Estado do Paraná, Brasil, classificadas como Tc I e II foram usadas para avaliar a correlação entre genética e diversidade biológica. Índice fagocítico (IF) e produção de óxido nítrico (ON) in vitro foram os parâmetros biológicos utilizados. O IF de cepas T. cruzi I e II não diferiram significativamente assim como o IF de cepas isoladas de humanos, triatomíneos ou de reservatórios silvestres. Há diferença estatística na inibição da produção de ON entre T. cruzi I e II e entre parasitos isolados de humanos e de cepas isoladas de triatomíneos e reservatórios silvestres, mas não foi observada correlação entre genética e biologia quando as cepas foram analisadas independentemente da linhagem ou hospedeiros das quais elas foram isoladas. Observou-se correlação significativa para amplificação aleatória do DNA polimórfico e parâmetros biológicos de Tc I ou II e para os seres humanos ou reservatório silvestre quando linhagens ou hospedeiros são consideradas separadamente