A stress free model for residual stress assessment using thermoelastic stress analysis

Thermoelastic Stress Analysis (TSA) has been proposed as a method of obtaining residual stresses. The results of a preliminary study demonstrated that when Al-2024 plate containing holes that were plastically deformed by cold expansion process to 2% and 4% strain the thermoelastic response in the material around the hole was different to that obtained from a plate that had not experienced any plastic cold expansion (i.e. a reference specimen). This observation provides an opportunity for obtaining residual stresses based on TSA data. In many applications a reference specimen (i.e. residual stress free specimen) may not be available for comparison, so a synthetic, digital bitmap has been proposed as an alternative. An elastic finite element model is created using commercially available software Abaqus/Standard and the resultant stress field is extracted. The simulated stress field from the model is mapped onto a grid that matches the TSA pixel data from a physical reference specimen. This stress field is then converted to a ?T/T field that can be compared to the full-field TSA data. When the reference experimental data is subtracted from the, bitmap dataset the resultant ?T/T field is approximately zero. Further work proposes replacing the experimental reference data with that from specimens that have undergone cold expansion with the aim of revealing the regions affected by residual stress through a departure from zero in the resultant stress field. The paper demonstrates the first steps necessary for deriving the residual stresses from a general specimen using TSA

Exploring factors that impact the decision to use assistive telecare: perspectives of family care-givers of older people in the United Kingdom

In the United Kingdom (UK), an ageing population met with the reduction of social care funding has led to reduced support for older people marked with an increased demand on family care-givers. Assistive telecare (AT) devices are viewed as an innovative and effective way to support older people. However, there is limited research which has explored adoption of AT from the perspectives of family care-givers. In-depth, semi-structured interviews were conducted with 14 family care-givers of patients who used the Assistive Telehealth and Telecare service in Cambridgeshire, UK. Family care-givers were either the spouse (N = 8) or child of the patient (N = 6). The patients' age ranged from 75 to 98, and either received a telecare standalone device or connected service. Framework analysis was used to analyse the transcripts. This study revealed that family care-givers play a crucial role in supporting the patient's decision to adopt and engage with AT devices. Knowledge and awareness, perceived responsibility, usefulness and usability, alongside functionality of the equipment, were influential factors in the decision-making process. AT devices were viewed positively, considered easy to use, useful and functional, with reassurance of the patient's safety being a core reason for adoption. Efforts to increase adoption and engagement should adapt recruitment strategies and service pathways to support both the patient and their care-giver

Exploring the factors that influence the decision to adopt and engage with an integrated assistive telehealth and telecare service in Cambridgeshire, UK: a nested qualitative study of patient 'users' and 'non-users'.

BACKGROUND: There is a political drive in the UK to use assistive technologies such as telehealth and telecare as an innovative and efficient approach to healthcare delivery. However, the success of implementation of such services remains dependent on the ability to engage the wider population to adopt these services. It has been widely acknowledged that low acceptance of technology, forms a key barrier to adoption although findings been mixed. Further, it remains unclear what, if any barriers exist between patients and how these compare to those who have declined or withdrawn from using these technologies. This research aims to address this gap focusing on the UK based Cambridgeshire Community Services Assistive Telehealth and Telecare service, an integrated model of telehealth and telecare. METHODS: Qualitative semi-structured interviews were conducted between 1st February 2014 and 1st December 2014, to explore the views and experiences of 'users' and 'non-users' using this service. 'Users' were defined as patients who used the service (N = 28) with 'non-users' defined as either referred patients who had declined the service before allocation (N = 3) or had withdrawn after using the ATT service (N = 9). Data were analysed using the Framework Method. RESULTS: This study revealed that there are a range of barriers and facilitators that impact on the decision to adopt and continue to engage with this type of service. Having a positive attitude and a perceived need that could be met by the ATT equipment were influential factors in the decision to adopt and engage in using the service. Engagement of the service centred on 'usability', 'usefulness of equipment', and 'threat to identity and independence'. CONCLUSIONS: The paper described the influential role of referrers in decision-making and the need to engage with such agencies on a strategic level. The findings also revealed that reassurance from the onset was paramount to continued engagement, particularly in older patients who appeared to have more negative feelings towards technology. In addition, there is a clear need for continued product development and innovation to not only increase usability and functionality of equipment but also to motivate other sections of the population who could benefit from such services. Uncovering these factors has important policy implications in how services can improve access and patient support through the application of assistive technology which could in turn reduce unnecessary cost and burden on overstretched health services.National Institute for Health ResearchThis is the final version of the article. It first appeared from BioMed Central via http://dx.doi.org/10.1186/s12913-016-1379-

Improving primary care Access in Context and Theory (I-ACT trial): a theory-informed randomised cluster feasibility trial using a realist perspective

Background Primary care access can be challenging for older, rural, socio-economically disadvantaged populations. Here we report the I-ACT cluster feasibility trial which aims to assess the feasibility of trial design and context-sensitive intervention to improve primary care access for this group and so expand existing theory. Methods Four general practices were recruited; three randomised to intervention and one to usual care. Intervention practices received £1500, a support manual and four meetings to develop local, innovative solutions to improve the booking system and transport. Patients aged over 64 years old and without household car access were recruited to complete questionnaires when booking an appointment or attending the surgery. Outcome measures at 6 months included: self-reported ease of booking an appointment and transport; health care use; patient activation; capability; and quality of life. A process evaluation involved observations and interviews with staff and participants. Results Thirty-four patients were recruited (26 female, eight male, mean age 81.6 years for the intervention group and 79.4 for usual care) of 1143 invited (3% response rate). Most were ineligible because of car access. Twenty-nine participants belonged to intervention practices and five to usual care. Practice-level data was available for all participants, but participant self-reported data was unavailable for three. Fifty-six appointment questionnaires were received based on 150 appointments (37.3%). Practices successfully designed and implemented the following context-sensitive interventions: Practice A: a stacked telephone system and promoting community transport; Practice B: signposting to community transport, appointment flexibility, mobility scooter charging point and promoting the role of receptionists; and Practice C: local taxi firm partnership and training receptionists. Practices found the process acceptable because it gave freedom, time and resource to be innovative or provided an opportunity to implement existing ideas. Data collection methods were acceptable to participants, but some found it difficult remembering to complete booking and appointment questionnaires. Expanded theory highlighted important mechanisms, such as reassurance, confidence, trust and flexibility. Conclusions Recruiting older participants without access to a car proved challenging. Retention of participants and practices was good but only about a third of appointment questionnaires were returned. This study design may facilitate a shift from one-size-fits-all interventions to more context-sensitive interventions

PAin SoluTions In the Emergency Setting (PASTIES)—patientcontrolled analgesia versus routine care in emergency department patients with pain from traumatic injuries: Randomised trial

Objective To determine whether patient controlled analgesia (PCA) is better than routine care in patients presenting to emergency departments with moderate to severe pain from traumatic injuries.Design Pragmatic, multicentre, parallel group, randomised controlled trial.Setting Five English hospitals.Participants 200 adults (71% (n=142) male), aged 18 to 75 years, who presented to the emergency department requiring intravenous opioid analgesia for the treatment of moderate to severe pain from traumatic injuries and were expected to be admitted to hospital for at least 12 hours.Interventions PCA (n=99) or nurse titrated analgesia (treatment as usual; n=101).Main outcome measures The primary outcome was total pain experienced over the 12 hour study period, derived by standardised area under the curve (scaled from 0 to 100) of each participant’s hourly pain scores, captured using a visual analogue scale. Pre-specified secondary outcomes included total morphine use, percentage of study period in moderate/severe pain, percentage of study period asleep, length of hospital stay, and satisfaction with pain management.Results 200 participants were included in the primary analyses. Mean total pain experienced was 47.2 (SD 21.9) for the treatment as usual group and 44.0 (24.0) for the PCA group. Adjusted analyses indicated slightly (but not statistically significantly) lower total pain experienced in the PCA group than in the routine care group (mean difference 2.7, 95% confidence interval −2.4 to 7.8). Participants allocated to PCA used more morphine in total than did participants in the treatment as usual group (mean 44.3 (23.2) v 27.2 (18.2) mg; mean difference 17.0, 11.3 to 22.7). PCA participants spent, on average, less time in moderate/severe pain (36.2% (31.0) v 44.1% (31.6)), but the difference was not statistically significant. A higher proportion of PCA participants reported being perfectly or very satisfied compared with the treatment as usual group (86% (78/91) v 76% (74/98)), but this was also not statistically significant.Conclusions PCA provided no statistically significant reduction in pain compared with routine care for emergency department patients with traumatic injuries.Trial registration European Clinical Trials Database EudraCT2011-000194-31; Current Controlled Trials ISRCTN25343280

Sulfur K-Edge XAS Studies of the Effect of DNA Binding on the [Fe_4S_4] Site in EndoIII and MutY

S K-edge X-ray absorption spectroscopy (XAS) was used to study the [Fe_4S_4] clusters in the DNA repair glycosylases EndoIII and MutY to evaluate the effects of DNA binding and solvation on Fe–S bond covalencies (i.e., the amount of S 3p character mixed into the Fe 3d valence orbitals). Increased covalencies in both iron–thiolate and iron–sulfide bonds would stabilize the oxidized state of the [Fe_4S_4] clusters. The results are compared to those on previously studied [Fe_4S_4] model complexes, ferredoxin (Fd), and to new data on high-potential iron–sulfur protein (HiPIP). A limited decrease in covalency is observed upon removal of solvent water from EndoIII and MutY, opposite to the significant increase observed for Fd, where the [Fe_4S_4] cluster is solvent exposed. Importantly, in EndoIII and MutY, a large increase in covalency is observed upon DNA binding, which is due to the effect of its negative charge on the iron–sulfur bonds. In EndoIII, this change in covalency can be quantified and makes a significant contribution to the observed decrease in reduction potential found experimentally in DNA repair proteins, enabling their HiPIP-like redox behavior

Interacting Galaxies in the A901/902 Supercluster with STAGES

We present a study of galaxy mergers and the influence of environment in the Abell 901/902 supercluster at z~0.165. We use HST ACS F606W data from the STAGES survey, COMBO-17, Spitzer 24um, and XMM-Newton X-ray data. Our analysis utilizes both a visual classification system, and quantitative CAS parameters to identify systems which show evidence of a recent or ongoing merger of mass ratio >1/10. Our results are: (1) After visual classification and minimizing the contamination from false projection pairs, we find that the merger fraction f_merge is 0.023+/-0.007. The estimated fractions of likely major mergers, likely minor mergers, and ambiguous cases are 0.01+/-0.004, 0.006+/-0.003, and 0.007+/-0.003, respectively. (2) The mergers lie outside the cluster core of radius R < 0.25 Mpc: the lack of mergers in the core is likely due to the large galaxy velocity dispersion in the core. Mergers populate the region (0.25 Mpc < R <= 2 Mpc) between the core and outskirt. In this region, the estimated frequency of mergers is similar to those seen at typical group overdensities. This suggests ongoing growth of the clusters via accretion of group and field galaxies. (3) We compare our observed merger fraction with those reported in other clusters and groups out to z~0.4. Existing data points on the merger fraction for L<= L* galaxies in clusters allow for a range of evolutionary scenarios. (4) The fraction of mergers, which lie on the blue cloud is 80%+/-18% versus 34%+/-7% for non-interacting galaxies, implying that interacting galaxies are preferentially blue. (5) The average SFR, based on UV or UV+IR data, is enhanced by a factor of ~1.5 to 2 in mergers compared to non-interacting galaxies. However, mergers in the clusters contribute only a small fraction (between 10% and 15%) of the total SFR density.(Abridged)Comment: Accepted for publication in ApJ. 34 pages, 16 figures. Version with full resolution figures available at: http://www.as.utexas.edu/~alh/apj/int/ ; updated abridged abstrac

Development of a novel continuous filtration unit for pharmaceutical process development and manufacturing

The lack of a commercial laboratory, pilot and small manufacturing scale dead end continuous filtration and drying unit it is a significant gap in the development of continuous pharmaceutical manufacturing processes for new active pharmaceutical ingredients (APIs). To move small-scale pharmaceutical isolation forward from traditional batch Nutsche filtration to continuous processing a continuous filter dryer prototype unit (CFD20) was developed in collaboration with Alconbury Weston Ltd. The performance of the prototype was evaluated by comparison with manual best practice exemplified using a modified Biotage VacMaster unit to gather data and process understanding for API filtration and washing. The ultimate objective was to link the chemical and physical attributes of an API slurry with equipment and processing parameters to improve API isolation processes. Filtration performance was characterized by assessing filtrate flow rate by application of Darcy's law, the impact on product crystal size distribution and product purity were investigated using classical analytical methods. The overall performance of the 2 units was similar, showing that the prototype CFD20 can match best manual lab practice for filtration and washing while allowing continuous processing and real-time data logging. This result is encouraging and the data gathered provides further insight to inform the development of CFD20