39,912 research outputs found
Self-calibrating threshold detector
A self calibrating threshold detector comprises a single demodulating channel which includes a mixer having one input receiving the incoming signal and another input receiving a local replica code. During a short time interval, an incorrect local code is applied to the mixer to incorrectly demodulate the incoming signal and to provide a reference level that calibrates the noise propagating through the channel. A sample and hold circuit is coupled to the channel for storing a sample of the reference level. During a relatively long time interval, the correct replica code provides an output level which ranges between the reference level and a maximum level that represents incoming signal presence and synchronism with the replica code. A summer substracts the stored sample reference from the output level to provide a resultant difference signal indicative of the acquisition of the expected signal
Numerical simulations of dust transport into northern high latitudes during a Martian polar warming
The formation and evolution of the polar laminated terrain depends on rates of dust transport to the polar caps. A simplified dynamical model is shown similar to models used to simulate terrestrial stratospheric polar warmings could simulate certain observed features of the circulation during Martian global dust storms. Model simulations of dust transport showed that substantial quantities of dust, enough to produce optical depths of approx. 1, could reach the pole during these storms
Transport of Mars atmospheric water into high northern latitudes during a polar warming
Several numerical experiments were conducted with a simplified tracer transport model in order to attempt to examine the poleward transport of Mars atmospheric water during a polar warming like that which occurred during the winter solstice dust storm of 1977. The flow for the transport experiments was taken from numerical simulations with a nonlinear beta-plane dynamical model. Previous studies with this model have demonstrated that a polar warming having essential characteristics like those observed during the 1977 dust storm can be produced by a planetary wave mechanism analogous to that responsible for terrestrial sudden stratospheric warmings. Several numerical experiments intended to simulate water transport in the absence of any condensation were carried out. These experiments indicate that the flow during a polar warming can transport very substantial amounts of water to high northern latitudes, given that the water does not condense and fall out before reaching the polar region
Advanced Architectures for Astrophysical Supercomputing
Astronomers have come to rely on the increasing performance of computers to
reduce, analyze, simulate and visualize their data. In this environment, faster
computation can mean more science outcomes or the opening up of new parameter
spaces for investigation. If we are to avoid major issues when implementing
codes on advanced architectures, it is important that we have a solid
understanding of our algorithms. A recent addition to the high-performance
computing scene that highlights this point is the graphics processing unit
(GPU). The hardware originally designed for speeding-up graphics rendering in
video games is now achieving speed-ups of in general-purpose
computation -- performance that cannot be ignored. We are using a generalized
approach, based on the analysis of astronomy algorithms, to identify the
optimal problem-types and techniques for taking advantage of both current GPU
hardware and future developments in computing architectures.Comment: 4 pages, 1 figure, to appear in the proceedings of ADASS XIX, Oct 4-8
2009, Sapporo, Japan (ASP Conf. Series
On the measurement of frequency and of its sample variance with high-resolution counters
A frequency counter measures the input frequency averaged over a
suitable time , versus the reference clock. High resolution is achieved
by interpolating the clock signal. Further increased resolution is obtained by
averaging multiple frequency measurements highly overlapped. In the presence of
additive white noise or white phase noise, the square uncertainty improves from
to .
Surprisingly, when a file of contiguous data is fed into the formula of the
two-sample (Allan) variance
of
the fractional frequency fluctuation , the result is the \emph{modified}
Allan variance mod . But if a sufficient number of contiguous
measures are averaged in order to get a longer and the data are fed into
the same formula, the results is the (non-modified) Allan variance. Of course
interpretation mistakes are around the corner if the counter internal process
is not well understood.Comment: 14 pages, 5 figures, 1 table, 18 reference
High-m Kink/Tearing Modes in Cylindrical Geometry
The global ideal kink equation, for cylindrical geometry and zero beta, is
simplified in the high poloidal mode number limit and used to determine the
tearing stability parameter, . In the presence of a steep
monotonic current gradient, becomes a function of a parameter,
, characterising the ratio of the maximum current gradient to
magnetic shear, and , characterising the separation of the resonant
surface from the maximum of the current gradient. In equilibria containing a
current "spike", so that there is a non-monotonic current profile,
also depends on two parameters: , related to the ratio
of the curvature of the current density at its maximum to the magnetic shear,
and , which now represents the separation of the resonance from the point
of maximum current density. The relation of our results to earlier studies of
tearing modes and to recent gyro-kinetic calculations of current driven
instabilities, is discussed, together with potential implications for the
stability of the tokamak pedestal.Comment: To appear in Plasma Physics and Controlled Fusio
Question design in nurse-led and GP-led telephone triage for same-day appointment requests: a comparative investigation
Objective: To compare doctors’ and nurses’ communication with patients in primary care telephone triage consultations. Design: Qualitative comparative study of content and form of questions in 51 telephone triage encounters between practitioners (general practitioners (GPs)=29; nurses=22) and patients requesting a same-day appointment in primary care. Audio-recordings of nurse-led calls were synchronised with video recordings of nurse's use of computer decision support software (CDSS) during triage. Setting: 2 GP practices in Devon and Warwickshire, UK. Participants: 4 GPs and 29 patients; and 4 nurses and 22 patients requesting a same-day face-to-face appointment with a GP. Main outcome measure: Form and content of practitioner-initiated questions and patient responses during clinical assessment. Results: A total of 484 question–response sequences were coded (160 GP; 324 N). Despite average call lengths being similar (GP=4 min, 37 s, (SD=1 min, 26 s); N=4 min, 39 s, (SD=2 min, 22 s)), GPs and nurses differed in the average number (GP=5.51, (SD=4.66); N=14.72, (SD=6.42)), content and form of questions asked. A higher frequency of questioning in nurse-led triage was found to be due to nurses’ use of CDSS to guide telephone triage. 89% of nurse questions were oriented to asking patients about their reported symptoms or to wider-information gathering, compared to 54% of GP questions. 43% of GP questions involved eliciting patient concerns or expectations, and obtaining details of medical history, compared to 11% of nurse questions. Nurses using CDSS frequently delivered questions designed as declarative statements requesting confirmation and which typically preferred a ‘no problem’ response. In contrast, GPs asked a higher proportion of interrogative questions designed to request information. Conclusions: Nurses and GPs emphasise different aspects of the clinical assessment process during telephone triage. These different styles of triage have implications for the type of information available following nurse-led or doctor-led triage, and for how patients experience triage
Localized exciton-polariton modes in dye-doped nanospheres: a quantum approach
We model a dye-doped polymeric nanosphere as an ensemble of quantum emitters
and use it to investigate the localized exciton-polaritons supported by such a
nanosphere. By determining the time evolution of the density matrix of the
collective system, we explore how an incident laser field may cause transient
optical field enhancement close to the surface of such nanoparticles. Our
results provide further evidence that excitonic materials can be used to good
effect in nanophotonics.Comment: 16 pages, 4 figure
Heat Capacity Mapping Radiometer (HCMR) data processing algorithm, calibration, and flight performance evaluation
The rationale and procedures used in the radiometric calibration and correction of Heat Capacity Mapping Mission (HCMM) data are presented. Instrument-level testing and calibration of the Heat Capacity Mapping Radiometer (HCMR) were performed by the sensor contractor ITT Aerospace/Optical Division. The principal results are included. From the instrumental characteristics and calibration data obtained during ITT acceptance tests, an algorithm for post-launch processing was developed. Integrated spacecraft-level sensor calibration was performed at Goddard Space Flight Center (GSFC) approximately two months before launch. This calibration provided an opportunity to validate the data calibration algorithm. Instrumental parameters and results of the validation are presented and the performances of the instrument and the data system after launch are examined with respect to the radiometric results. Anomalies and their consequences are discussed. Flight data indicates a loss in sensor sensitivity with time. The loss was shown to be recoverable by an outgassing procedure performed approximately 65 days after the infrared channel was turned on. It is planned to repeat this procedure periodically
Effects of Extreme Obliquity Variations on the Habitability of Exoplanets
We explore the impact of obliquity variations on planetary habitability in
hypothetical systems with high mutual inclination. We show that large
amplitude, high frequency obliquity oscillations on Earth-like exoplanets can
suppress the ice-albedo feedback, increasing the outer edge of the habitable
zone. We restrict our exploration to hypothetical systems consisting of a
solar-mass star, an Earth-mass planet at 1 AU, and 1 or 2 larger planets. We
verify that these systems are stable for years with N-body simulations,
and calculate the obliquity variations induced by the orbital evolution of the
Earth-mass planet and a torque from the host star. We run a simplified energy
balance model on the terrestrial planet to assess surface temperature and ice
coverage on the planet's surface, and we calculate differences in the outer
edge of the habitable zone for planets with rapid obliquity variations. For
each hypothetical system, we calculate the outer edge of habitability for two
conditions: 1) the full evolution of the planetary spin and orbit, and 2) the
eccentricity and obliquity fixed at their average values. We recover previous
results that higher values of fixed obliquity and eccentricity expand the
habitable zone, but also find that obliquity oscillations further expand
habitable orbits in all cases. Terrestrial planets near the outer edge of the
habitable zone may be more likely to support life in systems that induce rapid
obliquity oscillations as opposed to fixed-spin planets. Such planets may be
the easiest to directly characterize with space-borne telescopes.Comment: 46 pages, 12 Figures, 5 Table
- …