193 research outputs found
Characterization of Er in porous Si
The fabrication of porous Si-based Er-doped light emitting devices is a very promising developing field for all-silicon light emitters. However, while luminescence of Er-doped porous silicon devices has been demonstrated, very little attention has been devoted to the doping process itself. We have undertaken a detailed study of this process examining the porous silicon matrix from several points of view, during and after the doping. In particular, we have found that the Er doping process shows a threshold level which, as evidenced by the cross correlation of the various techniques used, does depend on the sample thickness and on the doping parameters
Crystallization of TiO2 nanotubes by in situ heating TEM
The thermally-induced crystallization of anodically grown TiO2 amorphous nanotubes has been studied so far under ambient pressure conditions by techniques such as differential scanning calorimetry and in situ X-ray diffraction, then looking at the overall response of several thousands of nanotubes in a carpet arrangement. Here we report a study of this phenomenon based on an in situ transmission electron microscopy approach that uses a twofold strategy. First, a group of some tens of TiO2 amorphous nanotubes was heated looking at their electron diffraction pattern change versus temperature, in order to determine both the initial temperature of crystallization and the corresponding crystalline phases. Second, the experiment was repeated on groups of few nanotubes, imaging their structural evolution in the direct space by spherical aberration-corrected high resolution transmission electron microscopy. These studies showed that, differently from what happens under ambient pressure conditions, under the microscope’s high vacuum (p < 10−5 Pa) the crystallization of TiO2 amorphous nanotubes starts from local small seeds of rutile and brookite, which then grow up with the increasing temperature. Besides, the crystallization started at different temperatures, namely 450 and 380 °C, when the in situ heating was performed irradiating the sample with electron beam energy of 120 or 300 keV, respectively. This difference is due to atomic knock-on effects induced by the electron beam with diverse energy
Controlling the Er content of porous silicon using the doping current intensity
The results of an investigation on the Er doping of porous silicon are presented. Electrochemical impedance spectroscopy, optical reflectivity, and spatially resolved energy dispersive spectroscopy (EDS) coupled to scanning electron microscopy measurements were used to investigate on the transient during the first stages of constant current Er doping. Depending on the applied current intensity, the voltage transient displays two very different behaviors, signature of two different chemical processes. The measurements show that, for equal transferred charge and identical porous silicon (PSi) layers, the applied current intensity also influences the final Er content. An interpretative model is proposed in order to describe the two distinct chemical processes. The results can be useful for a better control over the doping process
Correlating Fluorescence and High-Resolution Scanning Electron Microscopy (HRSEM) for the study of GABAA receptor clustering induced by inhibitory synaptic plasticity
Both excitatory and inhibitory synaptic contacts display activity dependent
dynamic changes in their efficacy that are globally termed synaptic
plasticity. Although the molecular mechanisms underlying glutamatergic
synaptic plasticity have been extensively investigated and described, those
responsible for inhibitory synaptic plasticity are only beginning to be
unveiled. In this framework, the ultrastructural changes of the inhibitory
synapses during plasticity have been poorly investigated. Here we combined
confocal fluorescence microscopy (CFM) with high resolution scanning electron
microscopy (HRSEM) to characterize the fine structural rearrangements of post-
synaptic GABAA Receptors (GABAARs) at the nanometric scale during the
induction of inhibitory long-term potentiation (iLTP). Additional electron
tomography (ET) experiments on immunolabelled hippocampal neurons allowed the
visualization of synaptic contacts and confirmed the reorganization of post-
synaptic GABAAR clusters in response to chemical iLTP inducing protocol.
Altogether, these approaches revealed that, following the induction of
inhibitory synaptic potentiation, GABAAR clusters increase in size and number
at the post-synaptic membrane with no other major structural changes of the
pre- and post-synaptic elements
Nanochains Formation of Superparamagnetic Nanoparticles
We present simulations on the aggregation of nanometer sized polydispersed superparamagnetic particles under the application of an external magnetic field. We make use of a Monte Carlo method, using a cluster-moving approach, as previously used in literature for ferrofluids. van der Waals attraction and magnetic anisotropy are taken into account in the simulations. Chains elongated in the field direction are formed. The results are in good agreement with recent experimental results on nanochains made of iron oxide nanoparticles into polymer matrix, obtained with the application of a magnetic field during film deposition. The magnetization anisotropy of the nanocomposite film under dc magnetic field can be predicted within this simple model
Estimation of Nanoporous Au Young's Modulus from Serial Block Face-SEM 3D-Characterisation
Nanoporous Au has been subjected to serial block face-scanning electron microscopy (SBF-SEM) 3D-characterisation. Corresponding sections have been digitalized and used to evaluate the associated mechanical properties. Our investigation demonstrates that the sample is homogeneous and isotropic. The effective Young's modulus estimated by an analytical multiscale approach agrees remarkably well with the values stated in the literature
Thermally Promoted Cation Exchange at the Solid State in the Transmission Electron Microscope: How It Actually Works
: Cation exchange offers a strong postsynthetic tool for nanoparticles that are unachievable via direct synthesis, but its velocity makes observing the onset of the reaction in the liquid state almost impossible. After successfully proving that cation exchange reactions can be triggered, performed, and followed live at the solid state by an in situ transmission electron microscopy approach, we studied the deep mechanisms ruling the onset of cation exchange reactions, i.e., the adsorption, penetration, and diffusion of cations in the host matrices of two crystal phases of CdSe. Exploiting an in situ scanning transmission electron microscopy approach with a latest generation heating holder, we were able to trigger, freeze, and image the initial stages of cation exchange with much higher detail. Also, we found a connection between the crystal structure of CdSe, the starting temperature, and the route of the cation exchange reaction. All the experimental results were further reviewed by molecular dynamics simulations of the whole cation exchange reaction divided in subsequent steps. The simulations highlighted how the cation exchange mechanism and the activation energies change with the host crystal structures. Furthermore, the simulative results strongly corroborated the activation temperatures and the cation exchange rates obtained experimentally, providing a deeper understanding of its phenomenology and mechanism at the atomic scale
Extremely large extinction efficiency and field enhancement in terahertz resonant dipole nanoantennas
The distinctive ability of nanometallic structures to manipulate light at the nanoscale has recently promoted their use for a spectacular set of applications in a wide range of areas of research including artificial optical materials, nano-imaging, biosensing, and nonlinear optics. Here we transfer this concept to the terahertz spectral region, demonstrating a metal nanostructure in shape of a dipole nanoantenna, which can efficiently resonate at terahertz frequencies, showing an effective cross section >100 times larger than its geometrical area, and a field enhancement factor of ~280, confined on a lateral section of ~λ/1,000. These results lead to immediate applications in terahertz artificial materials exhibiting giant dichroism, suggest the use of dipole nanoantennas in nanostructure-based terahertz metamaterials, and pave the way for nanoantenna-enhanced terahertz few-molecule spectroscopy and localized terahertz nonlinear optics
Tactile multisensing on flexible aluminum nitride
The integration of a polycrystalline material such as aluminum nitride (AlN) on a flexible substrate allows the realization of elastic tactile sensors showing both piezoelectricity and significant capacitive variation under normal stress. The application of a normal stress on AlN generates deformation of the flexible substrate on which AlN is grown, which results in strain gradient of the polycrystalline layer. The strain gradient is responsible for an additional polarization described in the literature as the flexoelectric effect, leading to an enhancement of the transduction properties of the material. The flexible AlN is synthesized by sputtering deposition on kapton HN (poly 4,4′- oxydiphenyl pyromellitimide) in a highly oriented crystal structure. High orientation is demonstrated by X-ray diffraction spectra (FWHM = 0.55° of AlN (0002)) and HRTEM. The piezoelectric coefficient d 33 and stress sensitive capacitance are 4.7 ± 0.5 pm V -1 and 4 × 10 -3 pF kPa -1, respectively. The parallel plate capacitors realized for tactile sensing present a typical dome shape, very elastic under applied stress and sensitive in the pressure range of interest for robotic applications (10 kPa to 1 MPa). The flexibility of the device finalized for tactile applications is assessed by measuring the sensor capacitance before and after shaping the sensing foil on curved surfaces for 1 hour. Bending does not affect sensors operation, which exhibits an electrical Q factor as high as 210, regardless of the bending, and a maximum capacitance shift of 0.02%
Acidic pH-responsive nanogels as smart cargo systems for the simultaneous loading and release of short oligonucleotides and magnetic nanoparticles.
Smart materials able to sense environmental stimuli can be exploited as intelligent carrier systems. Acidic pH-responsive polymers, for instance, exhibit a variation in the ionization state upon lowering the pH, which leads to their swelling. The different permeability of these polymers as a function of the pH could be exploited for the incorporation and subsequent release of previously trapped payload molecules/nanoparticles. We provide here a proof of concept of a novel use of pH-responsive polymer nanostructures based on 2-vinylpyridine and divinylbenzene, having an overall size below 200 nm, as cargo system for magnetic nanoparticles, for oligonucleotide sequences, as well as for their simultaneous loading and controlled release mediated by the pH
- …