11,339 research outputs found
Phase-coexisting patterns, horizontal segregation and controlled convection in vertically vibrated binary granular mixtures
We report new patterns, consisting of coexistence of sub-harmonic/harmonic
and asynchronous states [for example, a granular gas co-existing with (i)
bouncing bed, (ii) undulatory subharmonic waves and (iii) Leidenfrost-like
state], in experiments on vertically vibrated binary granular mixtures in a
Heleshaw-type cell. Most experiments have been carried out with equimolar
binary mixtures of glass and steel balls of same diameter by varying the total
layer-height () for a range of shaking acceleration (). All patterns
as well as the related phase-diagram in the ()-plane have been
reproduced via molecular dynamics simulations of the same system. The
segregation of heavier and lighter particles along the horizontal direction is
shown to be the progenitor of such phase-coexisting patterns as confirmed in
both experiment and simulation. At strong shaking we uncover a {\it partial}
convection state in which a pair of convection rolls is found to coexist with a
Leidenfrost-like state. The crucial role of the relative number density of two
species on controlling the buoyancy-driven granular convection is demonstrated.
A possible model for spontaneous horizontal segregation is suggested based on
anisotropic diffusion
Clear Experimental Signature of Charge-Orbital density wave in NdCaMnO
Single Crystals of NdCaMnO have been prepared by the
travelling floating-zone method, and possible evidence of a charge -orbital
density wave in this material presented earlier [PRB68,092405 (2003)] using
High Resolution Electron Microscopy [HRTEM] and Electron Diffraction [ED]. In
the current note we present direct evidence of charge-orbital ordering in this
material using heat capacity measurements. Our heat capacity measurements
indicate a clear transition consistent with prior observation. We find two main
transitions, one at temperature K, and other at
K. In addition, we may also conclude that there is a strong electron-phonon
coupling in this material.Comment: 7 pages, 8 figure
The impact of support for imports on food security in Indonesia
This study on the impact of import support on food security was conducted in eight developing countries -including Indonesia- that were facing food insecurity and were recipients of subsidized exports and food aid. In Indonesia, the analysis of import flows in comparison with overall production and consumption data led to the selection of the three import substitute commodities, soybean, sugar and milk, that were the focus of this study. The objective of the study was to provide an analysis of the national impact of export support measures on food security, by taking into account their impact on the producers and consumers of the three commodities.IMPORTS, EXPORTS, FOOD, ECURITY, SOYBEANS, SUGAR, MILK, FOOD AID, Agricultural and Food Policy, Crop Production/Industries, Food Security and Poverty, International Relations/Trade, Production Economics,
On entropy, specific heat, susceptibility and Rushbrooke inequality in percolation
We investigate percolation, a probabilistic model for continuous phase
transition (CPT), on square and weighted planar stochastic lattices. In its
thermal counterpart, entropy is minimally low where order parameter (OP) is
maximally high and vice versa. Besides, specific heat, OP and susceptibility
exhibit power-law when approaching the critical point and the corresponding
critical exponents respectably obey the Rushbrooke
inequality (RI) . Their analogues in percolation,
however, remain elusive. We define entropy, specific heat and redefine
susceptibility for percolation and show that they behave exactly in the same
way as their thermal counterpart. We also show that RI holds for both the
lattices albeit they belong to different universality classes.Comment: 5 pages, 3 captioned figures, to appear as a Rapid Communication in
Physical Review E, 201
Comparison of Compressive Strength and Flexural Capacity between Engineered Cementitious Composites (Bendable Concrete) and Conventional Concrete used in Bangladesh
The Engineered Cementitious Composites (ECC) is made of the same ingredients as in regular concrete. The coarse aggregate is replaced with tiny Polyvinyl Alcohol fibres. This structure offers maximum flexibility and it is expected to cost less. It looks exactly like normal concrete, but under excessive strain, the ECC concrete allows, the specially coated network of fibre in the cement to slide within the cement, thus avoiding the inflexibility that causes brittleness and breakage. As this is a special type of concrete there are no defined codes for it, thus for these reasons, the parameters needed are to be obtained using trial and error method. During the composite preparation, sieve analysis was carried out. Composites were reinforced with Polyvinyl Alcohol (PVA) at the following ratios: 0 % (control), 0.5 %, 1 % and 1.5 %. The cylindrical specimens were subjected to compression and the slab specimens were subjected to flexural test using a Universal Testing Machine, while acquiring data with GOM Correlation Software. Test results reveal that fibre ratio 1% is most acceptable for attaining best compressive strength along with high flexural value. Even though 1% fibre content concrete in the flexural strength test showed 33% less strength of what 1.5% fibre content concrete gained, in the long run, for having the highest compressive strength value (almost 62% more than of 0% fibre content concrete and 15% more than of 1.5% fibre content concrete), 1% fibre content concrete is most suited for constructions
Quenching of light hadrons at RHIC in a collisional energy loss scenario
We evaluate the nuclear suppression factor, for light hadrons
by taking into account the collisional energy loss. We show that in the
measured domain of RHIC the elastic process is the dominant mechanism for
the partonic energy loss.Comment: 4 pages with 3 figures, Quark Matter 2008 Proceeding
Supervised machine learning based multi-task artificial intelligence classification of retinopathies
Artificial intelligence (AI) classification holds promise as a novel and
affordable screening tool for clinical management of ocular diseases. Rural and
underserved areas, which suffer from lack of access to experienced
ophthalmologists may particularly benefit from this technology. Quantitative
optical coherence tomography angiography (OCTA) imaging provides excellent
capability to identify subtle vascular distortions, which are useful for
classifying retinovascular diseases. However, application of AI for
differentiation and classification of multiple eye diseases is not yet
established. In this study, we demonstrate supervised machine learning based
multi-task OCTA classification. We sought 1) to differentiate normal from
diseased ocular conditions, 2) to differentiate different ocular disease
conditions from each other, and 3) to stage the severity of each ocular
condition. Quantitative OCTA features, including blood vessel tortuosity (BVT),
blood vascular caliber (BVC), vessel perimeter index (VPI), blood vessel
density (BVD), foveal avascular zone (FAZ) area (FAZ-A), and FAZ contour
irregularity (FAZ-CI) were fully automatically extracted from the OCTA images.
A stepwise backward elimination approach was employed to identify sensitive
OCTA features and optimal-feature-combinations for the multi-task
classification. For proof-of-concept demonstration, diabetic retinopathy (DR)
and sickle cell retinopathy (SCR) were used to validate the supervised machine
leaning classifier. The presented AI classification methodology is applicable
and can be readily extended to other ocular diseases, holding promise to enable
a mass-screening platform for clinical deployment and telemedicine.Comment: Supplemental material attached at the en
Weak Kaon Production off the Nucleon
The weak kaon production off the nucleon induced by neutrinos is studied at
the low and intermediate energies of interest for some ongoing and future
neutrino oscillation experiments. This process is also potentially important
for the analysis of proton decay experiments. We develop a microscopical model
based on the SU(3) chiral Lagrangians. The basic parameters of the model are
fpi, the pion decay constant, Cabibbo's angle, the proton and neutron magnetic
moments and the axial vector coupling constants for the baryons octet, D and F,
that are obtained from the analysis of the semileptonic decays of neutron and
hyperons. The studied mechanisms are the main source of kaon production for
neutrino energies up to 1.2 to 1.5 GeV for the various channels and the cross
sections are large enough to be amenable to be measured by experiments such as
Minerva and T2K
Electrodeposition of CdS thin-films from cadmium acetate and ammonium thiosulphate precursors
Cadmium sulphide (CdS) thin-films have been electrodeposited using two electrode system to be used as the hole back diffusion barrier (hbdb) layer for graded bandgap solar cells with p-type windows. Cadmium acetate dihydrate [Cd(CH3COO)2·2H2O] and ammonium thiosulphate [(NH4)2S2O3] have been used as the cadmium (Cd) and sulphur (S) precursors respectively. In this work, CdS layers have been grown on glass/FTO (fluorine doped tin oxide) substrates at cathodic potentials ranging from 1300 to 1460 mV in order to find the best growth voltage. N-type conductivity is observed for all the layers and band-gap ranged between ~ 2.36 and ~ 2.40 eV for as-deposited layers and ~ 2.31 and ~ 2.36 eV for air-annealed layers. X-ray diffraction (XRD) analysis revealed cubic/hexagonal mixed crystallinity for the as-grown layers which indicates a tendency of transiting towards hexagonal structure upon annealing. Compositional and morphological characteristics of the layers have been investigated with energy dispersive X-ray (EDX) and scanning electron microscopy (SEM) respectively
- …