1,236 research outputs found
Changing the bonding force of impression tray to edentulous maxillary jaw simulator with impression valve system: In vitro study
Objective: The aim of this study was to evaluate the effect of an impression valve system (IVS) on the bonding force between an impression tray and an edentulous maxillary jaw.Materials and Methods: In this in vitro study, a polyether.coated maxillary jaw simulator (PM) was used to model an edentulous maxillary jaw. The IVS was placed into individual impression trays. An irreversible hydrocolloid impression was taken of the PM when the IVS was open and closed. The impression tray bonding force was measured using a digital dynamometer. Student's t.test was used to determine the significance of the difference between these two groups.Results: The impression tray was more easily separated from the PM when the IVS was open (108 ± 3.9 N). The separation was more difficult when the IVS was closed (153.7 ±14.2 N). The difference between these two findings (P = 0.000) was significant.Conclusion: The use of an IVS facilitates the removal of the impression tray from the mouth when taking impressions from an edentulous maxillary jaw.Key words: Bonding force, impression tray, maxillary ja
Loofah activated carbon with hierarchical structures for high-efficiency adsorption of multi-level antibiotic pollutants
For antibiotic contaminants, biochar adsorbents have been regarded as one of the most suitable materials due to their safety for human health and good adsorption performance. In this study, loofah activated carbon (LAC) was prepared by a simple high temperature carbonization process, while mixing LAC with agarose solution under stirring at 90 °C, after which LAC-loaded agarose aerogel (LAC-AA) adsorbents could be obtained by freeze-dried under a vacuum condition. The LAC is consisted of hierarchical laminae-trestle-laminae (L-T-L) microstructure with highly ordered, whose surfaces are fully covered by nanoscale protrusions. The unique hierarchical structures possessing high specific surface areas (~736.86 m2 g−1) and abundant active surface sites, which contribute significantly to the adsorption of antibiotics (to name a few, tetracycline (TC), ofloxacin (OFO) and norfloxacin (NFO)). The results indicate that the capacity of adsorption towards TC, NFO and OFO (1–40 ppm) by the LAC-loaded agarose aerogel (LAC-AA) adsorbents is 537.6, 434.8 and 581.4 mg g−1, respectively, which is significantly greater than that of currently-available adsorbents. In parallel, the atomic adsorption model’s simulation further confirms that the OFO is prone to be adsorbed on the LAC with the lowest adsorption energy that resulted in the largest adsorption capacity
Effect of different segmentation methods using optical satellite imagery to estimate fuzzy clustering parameters for Sentinel-1A SAR images
Optical and SAR data are efficient data sources for shoreline monitoring. The processing of SAR data such as feature extraction is not an easy task since the images have totally different structure than optical imagery. Determination of threshold value is a challenging task for SAR data. In this study, SENTINEL-2A optical data was used as ancillary data to predict fuzzy membership parameters for segmentation of SENTINEL-1A SAR data to extract shoreline. SENTINEL-2A and SENTINEL-1A satellite images used were taken in September 9, 2016 and September 13, 2016 respectively. Three different segmentation algorithms which are selected from object, learning and pixel-based methods. They have been exploited to obtain land and water classes which have been used as an input data for parameter estimation. Thus, the performance of different segmentation algorithm has been investigated and analysed. In the first step of the study, Mean-Shift, Random Forest and Whale Optimization algorithms have been employed to obtain water and land classes from the SENTINEL-2A image. Water and land classes derived from each algorithm – are used as input data, and then the required parameters for the fuzzy clustering of SENTINEL-1A SAR image, were calculated. Lake Constance, Germany has been chosen as the study area. In this study, additionally an interface plugin has been developed and integrated into the open source Quantum GIS software platform. The developed interface allows non-experts to process and extract the shorelines without using any parameters. But, this system requires pre-segmented data as input. Thus, the batch process calculates the required parameters
A Note on Projective Klingenberg Planes over Rings of Plural Numbers
This paper deals with a certain class of projective Klingenberg planes over the local ring F[eta]/lteta^{m}gt with F an arbitrary field, known as the plural algebra of order m. In particular addition and multiplication of points on a line is defined geometrically and interpreted algebraically, by using the coordinate ring
EFFECT OF DIFFERENT SEGMENTATION METHODS USING OPTICAL SATELLITE IMAGERY TO ESTIMATE FUZZY CLUSTERING PARAMETERS FOR SENTINEL-1A SAR IMAGES
Optical and SAR data are efficient data sources for shoreline monitoring. The processing of SAR data such as feature extraction is not an easy task since the images have totally different structure than optical imagery. Determination of threshold value is a challenging task for SAR data. In this study, SENTINEL-2A optical data was used as ancillary data to predict fuzzy membership parameters for segmentation of SENTINEL-1A SAR data to extract shoreline. SENTINEL-2A and SENTINEL-1A satellite images used were taken in September 9, 2016 and September 13, 2016 respectively. Three different segmentation algorithms which are selected from object, learning and pixel-based methods. They have been exploited to obtain land and water classes which have been used as an input data for parameter estimation. Thus, the performance of different segmentation algorithm has been investigated and analysed. In the first step of the study, Mean-Shift, Random Forest and Whale Optimization algorithms have been employed to obtain water and land classes from the SENTINEL-2A image. Water and land classes derived from each algorithm – are used as input data, and then the required parameters for the fuzzy clustering of SENTINEL-1A SAR image, were calculated. Lake Constance, Germany has been chosen as the study area. In this study, additionally an interface plugin has been developed and integrated into the open source Quantum GIS software platform. The developed interface allows non-experts to process and extract the shorelines without using any parameters. But, this system requires pre-segmented data as input. Thus, the batch process calculates the required parameters
The Impact of Warmed Intravenous Contrast Material on the Bolus Geometry of Coronary CT Angiography Applications
Objective This study was designed to investigate the effect of administration of warmed contrast material (CM) on the bolus geometry and enhancement as depicted on coronary CT angiography. Materials and Methods A total of 64 patients (42 men, 22 women; mean age, 56 years) were randomly divided into two groups. Group 1 included 32 patients administered CM (Omnipaque [Iohexol] 350 mg I/ mL; Nycomed, Princeton, NJ) saline solutions kept in an incubator at a constant temperature (37℃). Group 2 included 32 patients administered the CM saline solutions kept at constant room temperature (24℃). Cardiac CT scans were performed with a dual source computed tomography (DSCT) scanner. For each group, region of interest curves were plotted inside the ascending aorta, main pulmonary artery and descending aorta on test bolus images. Using enhancement values, time/enhancement diagrams were produced for each vessel. On diagrams, basal Hounsfield unit (HU) values were subtracted from sequentially obtained values. A value of 100 HU was accepted as a cut-off value for the beginning of opacification. The time to peak, the time required to reach 100 HU opacification, maximum enhancement and duration of enhancement above 100 HU were noted. DSCT angiography studies were evaluated for coronary vessel enhancement. Results Maximum enhancement values in the ascending aorta, descending aorta and main pulmonary artery were significantly higher in group 1 subjects. In the ascending aorta, the median time required to reach 100 HU opacification during the test bolus analysis was significantly shorter for group 2 subjects than for group 1 subjects. In the ascending aorta, the descending aorta and main pulmonary artery, for group 1 subjects, the bolus geometry curve shifted to the left and upwards as compared with the bolus geometry curve for group 2 subjects. Conclusion The use of warmed CM yields higher enhancement values and a shorter time to reach maximum enhancement duration, resulting in a shift of the bolus geometry curve to the left that may provide optimized image quality.PubMedWoSScopu
IL-6 mediated JAK/STAT3 signaling pathway in cancer patients with cachexia
CONCLUSION: STAT3 may be considered as a therapeutic target for cachectic patients with gastric, lung and breast cancer. Furthermore, IL-6 mediates STAT3 activation in cachectic gastric and breast cancer patients (Tab. 5, Fig. 2, Ref. 62)
Capturing wheat phenotypes at the genome level
Recent technological advances in next-generation sequencing (NGS) technologies have dramatically reduced the cost of DNA sequencing, allowing species with large and complex genomes to be sequenced. Although bread wheat (Triticum aestivum L.) is one of the world’s most important food crops, efficient exploitation of molecular marker-assisted breeding approaches has lagged behind that achieved in other crop species, due to its large polyploid genome. However, an international public–private effort spanning 9 years reported over 65% draft genome of bread wheat in 2014, and finally, after more than a decade culminated in the release of a gold-standard, fully annotated reference wheat-genome assembly in 2018. Shortly thereafter, in 2020, the genome of assemblies of additional 15 global wheat accessions was released. As a result, wheat has now entered into the pan-genomic era, where basic resources can be efficiently exploited. Wheat genotyping with a few hundred markers has been replaced by genotyping arrays, capable of characterizing hundreds of wheat lines, using thousands of markers, providing fast, relatively inexpensive, and reliable data for exploitation in wheat breeding. These advances have opened up new opportunities for marker-assisted selection (MAS) and genomic selection (GS) in wheat. Herein, we review the advances and perspectives in wheat genetics and genomics, with a focus on key traits, including grain yield, yield-related traits, end-use quality, and resistance to biotic and abiotic stresses. We also focus on reported candidate genes cloned and linked to traits of interest. Furthermore, we report on the improvement in the aforementioned quantitative traits, through the use of (i) clustered regularly interspaced short-palindromic repeats/CRISPR-associated protein 9 (CRISPR/Cas9)-mediated gene-editing and (ii) positional cloning methods, and of genomic selection. Finally, we examine the utilization of genomics for the next-generation wheat breeding, providing a practical example of using in silico bioinformatics tools that are based on the wheat reference-genome sequence
Essential Medicines at the National Level : The Global Asthma Network's Essential Asthma Medicines Survey 2014
Patients with asthma need uninterrupted supplies of affordable, quality-assured essential medicines. However, access in many low- and middle-income countries (LMICs) is limited. The World Health Organization (WHO) Non-Communicable Disease (NCD) Global Action Plan 2013-2020 sets an 80% target for essential NCD medicines' availability. Poor access is partly due to medicines not being included on the national Essential Medicines Lists (EML) and/or National Reimbursement Lists (NRL) which guide the provision of free/subsidised medicines. We aimed to determine how many countries have essential asthma medicines on their EML and NRL, which essential asthma medicines, and whether surveys might monitor progress. A cross-sectional survey in 2013-2015 of Global Asthma Network principal investigators generated 111/120 (93%) responses41 high-income countries and territories (HICs); 70 LMICs. Patients in HICs with NRL are best served (91% HICs included ICS (inhaled corticosteroids) and salbutamol). Patients in the 24 (34%) LMICs with no NRL and the 14 (30%) LMICs with an NRL, however no ICS are likely to have very poor access to affordable, quality-assured ICS. Many LMICs do not have essential asthma medicines on their EML or NRL. Technical guidance and advocacy for policy change is required. Improving access to these medicines will improve the health system's capacity to address NCDs.Peer reviewe
- …