The sustainability of communicative packaging concepts in the food supply chain. A case study: part 1. Life cycle assessment

Purpose In recent years, a new perspective for food packaging has emerged as a result of several issues like quality, safety, competitive prices or providing of useful information to consumers. This new perspective is called communicative packaging. Communicative packaging may influence consumers/companies on purchasing decisions. Since the environmental evaluation of such systems has not yet been performed, this paper is focused on the environmental evaluation of a flexible best-before-date (FBBD) communicative device on a packaging consumer unit and its implications on reducing environmental impacts related to fresh products. This consumer unit consists of a nanoclay-based polylactic acid tray filled with pork chops. Methods The environmental assessment of the consumer unit was made through life cycle assessment (LCA) using a cradle-to-gate approach. Environmental impacts were assessed according to the Eco-Indicator 99 v 2.1 methodology in Individualist (I) perspective. Results and discussion Several results were obtained from the LCA. With regard to environmental impacts of the FBBD, most of them were due to the paper substrate used for the manufacture of this communicative packaging concept as well as to the transports for delivering the components of the FBBD communicative device. On the other hand, when environmental impacts of packaging system with and without FBBD were compared, a large environmental load was detected for the system that has the communicative device affixed as a result of the higher weight of the package. However, the environmental load caused by the use of the FBBD was minimal in comparison with the total environmental load of the whole packaging system. On the contrary, the consumer unit that has the communicative device affixed showed less environmental burden than the consumer unit that has not affixed the device. This was due to the environmental benefits that the communicative device provides by reducing the amount of out-of-date packaged products at retailer outlets. Conclusions The use of a FBBD contributes to minimize environmental burdens related to the production, packaging and delivery of pork chops since it facilitates a dynamic control of out-of-date products even though the consumer unit with FBBD weighs 1 g more than the consumer unit that does not use the communicative device. Recommendations The results presented in this paper are estimated results of a specific case study for a prototype of communicative packaging device. Consequently, these results must be considered as a first approach according to future developments on communicative packaging

Crucial role of sidewalls in velocity distributions in quasi-2D granular gases

Our experiments and three-dimensional molecular dynamics simulations of particles confined to a vertical monolayer by closely spaced frictional walls (sidewalls) yield velocity distributions with non-Gaussian tails and a peak near zero velocity. Simulations with frictionless sidewalls are not peaked. Thus interactions between particles and their container are an important determinant of the shape of the distribution and should be considered when evaluating experiments on a tightly constrained monolayer of particles.Comment: 4 pages, 4 figures, Added reference, model explanation charified, other minor change

Associations of Maternal Complaints to Levator Ani Muscle Trauma within 9 Months after Vaginal Birth: A Prospective Observational Cohort Study

Introduction: Pelvic floor trauma in the form of partial or complete avulsions of the levator ani muscle (LAM) affects 6-42% of women after vaginal birth and can cause tremendous long-term morbidity. Many studies assessed morphological pelvic floor trauma after childbirth but lacked to evaluate women's associated short-term complaints. A proper assessment of trauma and subjective complaints after birth could help to assess possible associations between them and their relevance to women's daily life. Therefore, we aimed to assess women's complaints within the first months after birth in association to their LAM trauma. Materials and methods: Between 3/2017 and 4/2019, we prospectively evaluated vaginal births of 212 primiparous women with singletons in vertex presentation ≥ 36 + 0 gestational weeks for levator ani muscle (LAM) trauma by translabial ultrasound, for pelvic organ prolapse by clinical examination, and for urogynecological complaints using questionnaires 1-4 days (P1), 6-10 weeks (P2), and 6-9 months (P3) after birth. The questionnaires were self-designed but oriented to and modified from validated questionnaires. Women's complaints were evaluated for P1-P3 according to their LAM trauma state. Results: At P1, 67% of women showed an intact LAM, whereas 14.6% presented a hematoma, 6.6% a partial avulsion (PAV), and 11.8% a complete avulsion (CAV). At P2, 75.9% showed an intact LAM, 9.9% a PAV, and 14.2% a CAV. At P3, 72.9% of women with a LAM trauma in P1 and/or P2 were assessed with 21.6% being intact and 39.2% having a PAV and CAV, respectively. Obstetrical and baseline characteristics differed slightly between the groups. When comparing the time before and during pregnancy with the time after childbirth, birth itself affected women's complaints in all LAM state groups, but the presence of a LAM trauma, especially a CAV, had more negative effects. Conclusions: Vaginal birth changes the anatomical structure of the maternal birth canal and genital tract, and it alters women's perceptions and body function. In our study, LAM trauma did not change these effects tremendously within the first months. Therefore, other maternal, fetal, and obstetrical factors need consideration for the explanation of maternal complaints, in addition to long-term effects of trauma and dysfunction of the LAM and other birth canal structures

Influence of Salinity on the Consistency and Swelling Characteristics of Bentonite

Bentonite clay liners are used as a barrier material for water, chemicals and gas in civil engineering structures such as engineered landfills and in structural water proofing. Bentonic clays absorb water and expand greater than any other ordinary plastic clay. The expansiveness of the clay is characterised by the absorbed cation in the clay and the geochemical environment. This paper critically investigates factors that contribute to the swelling characteristics of bentonite clay and its products. It takes particular view on different types of bentonite used in clay liners and their interaction with saline ground water conditions. The swelling pressure of sodium bentonite in deionised water is demonstrated to be very high. However when it is in a saline environment the magnitude of swelling pressure can be less than halved. A parallel observation is noted under conditions of free swell. These are explained as being a consequence of reduction in the double layer thickness which is further reflected in the reduction of cationexchange capacity when the bentonite is in a saline environment. Variations in cation exchange capacity, consistency limit and free swell of the bentonite products in different saline environment are observed and its significance discussed

The impact of resource dependence of the mechanisms of life on the spatial population dynamics of an in silico microbial community

Biodiversity has a critical impact on ecosystem functionality and stability, and thus the current biodiversity crisis has motivated many studies of the mechanisms that sustain biodiversity, a notable example being non-transitive or cyclic competition. We therefore extend existing microscopic models of communities with cyclic competition by incorporating resource dependence in demographic processes, characteristics of natural systems often oversimplified or overlooked by modellers. The spatially explicit nature of our individual-based model of three interacting species results in the formation of stable spatial structures, which have significant effects on community functioning, in agreement with experimental observations of pattern formation in microbial communities. Published by AIP Publishing

Composite repetition-aware data structures

In highly repetitive strings, like collections of genomes from the same species, distinct measures of repetition all grow sublinearly in the length of the text, and indexes targeted to such strings typically depend only on one of these measures. We describe two data structures whose size depends on multiple measures of repetition at once, and that provide competitive tradeoffs between the time for counting and reporting all the exact occurrences of a pattern, and the space taken by the structure. The key component of our constructions is the run-length encoded BWT (RLBWT), which takes space proportional to the number of BWT runs: rather than augmenting RLBWT with suffix array samples, we combine it with data structures from LZ77 indexes, which take space proportional to the number of LZ77 factors, and with the compact directed acyclic word graph (CDAWG), which takes space proportional to the number of extensions of maximal repeats. The combination of CDAWG and RLBWT enables also a new representation of the suffix tree, whose size depends again on the number of extensions of maximal repeats, and that is powerful enough to support matching statistics and constant-space traversal.Comment: (the name of the third co-author was inadvertently omitted from previous version

Pressure Modulator Radiometer (PMR) tests

The pressure modulator technique was evaluated for monitoring pollutant gases in the Earth's atmosphere of altitude levels corresponding to the mid and lower troposphere. Using an experimental set up and a 110 cm sample cell, pressure modulator output signals resulting from a range of gas concentrations in the sample cell were examined. Then a 20 cm sample cell was modified so that trace gas properties in the atmosphere could be simulated in the laboratory. These gas properties were measured using an infrared sensor