546 research outputs found
Analisis Perencanaan Tenaga Kerja Di Perusahaan Redrying Tembakau
Planning of labour is activity of determination of amount and labours types required by an organizations for aperiod of which will come. Therefore planning of labour is with refer to activity related to forecasting of requirement oflabour in a period of to come at one particular organization, cover new labour preparation and utilization which haveis available. Or equally determine the labour movement from position in this time towards position which wanted in aperiod of to come. In this research done by analysis and enumeration concerning planning of labour at company ofredrying tobacco which will make a change is internal that is doing installation of new machine by paying attention tosome policies and purpose of specified by companies. Method which applied is programming linear, while processingwhich implemented is determine and define decision variable then expressed in mathematical symbol, develop(buildaimed at mathematical model is programming linear formulation then calculate objective function for each purpose ofthat is minimizing redundancy and minimize expense where in this enumeration applied by computer software aid QMor windows version 2.2, software for quantitative method, management science or operational research. From resultcalculation and analysis seen that planning of labour with policy for minimizing redundancy and policy for minimizingexpense yield difference of result calculation enough signifikan
Pendekatan Linear Programming Untuk Persoalan Pemotongan Stok (Pola Pemotongan Satu Dimensi)
In this study, one-dimensional cutting pattern is discussed. This includes fulfilling demands for some items with different lengths by cutting some stocks of standard length available. In this problem, the patterns – the way the standard length is cut – is obtained in such an optimal ways that the trim loss becomes as minimum as possible. The decision variables are the amount of the standard lengths cut according to certain patterns. Then the problem is formulated into a linear programming model. Due to very large number of the variables and restriction to integers, the problem is the type of large scale linear integer programming. For simplicity, restriction to integer is dropped. Then the very large number of the variables is handled by considering only the favorable cutting patterns; list of all possibleways in which a standard stock may be cut is not needed. The favorable cutting pattern is then generated by using column generation technique by solving auxiliary problem in the form of a knapsack problem. The integer optimal solution is obtained by rounding it upwar
ANALISIS PERENCANAAN TENAGA KERJA DI PERUSAHAAN REDRYING TEMBAKAU
Planning of labour is activity of determination of amount and labours types required by an organizations for aperiod of which will come. Therefore planning of labour is with refer to activity related to forecasting of requirement oflabour in a period of to come at one particular organization, cover new labour preparation and utilization which haveis available. Or equally determine the labour movement from position in this time towards position which wanted in aperiod of to come. In this research done by analysis and enumeration concerning planning of labour at company ofredrying tobacco which will make a change is internal that is doing installation of new machine by paying attention tosome policies and purpose of specified by companies. Method which applied is programming linear, while processingwhich implemented is determine and define decision variable then expressed in mathematical symbol, develop(buildaimed at mathematical model is programming linear formulation then calculate objective function for each purpose ofthat is minimizing redundancy and minimize expense where in this enumeration applied by computer software aid QMor windows version 2.2, software for quantitative method, management science or operational research. From resultcalculation and analysis seen that planning of labour with policy for minimizing redundancy and policy for minimizingexpense yield difference of result calculation enough signifikan.Keyword:Planning of labour ( manpower planning), programming linea
MENINGKATKAN HASIL BELAJAR IPS DENGAN MENGGUNAKAN METODE DISKUSI PADA SISWA KELAS IV SDN INTI OLAYA KECAMATAN PARIGI
Tujuan penelitian ini adalah untuk meningkatkan hasil belajar siswa pada mata pelajaran IPS melalui penggunaan metode diskusi pada kelas IV SDN Olaya kecamatan Parigi. Subjek penelitian ini adalah seluruh murid kelas IV SDN Olaya kecamatan Parigi yang berjumlah 21 siswa yang terdiri dari 13 siswa laki-laki dan 8 siswi perempuan. Jenis penelitian ini adalah penelitian tindakan kelas yang dilaksanakan dalam 2 siklus yang terdiri dari atas tahap perencanaan, pelaksanaan tindakan, observasi, dan refleksi. Teknik pengumpulan data yang digunakan adalah observasi, penugasan pada kegiatan inti dan teks akhir untuk mengetahui hasil belajar siswa setelah dilakukan tindakan kelas dengan menerapkan metode diskusi. Hasil penelitian menunjukkan bahwa penerapan metode diskusi dalam pembelajaran IPS dapat meningkatkan hasil belajar siswa pada materi kegiatan ekonomi penduduk. Hal ini dapat dilihat dari hasil penelitian siklus I dengan skor tertinggi 80, skor terendah 36 dan skor rata-rata yang diperoleh 60,76, mengalami peningkatan yang signifikan pada siklus II dengan skor tertinggi 88, skor terendah 52 dan skor rata-rata yang diperoleh 74,09 yang terdiri dari 21 siswa. Kata-kata Kunci : Hasil Belajar; IPS; Metode Diskus
The Trowbridge Gang, 1842
counterfeiting is the unlawful production of any article in imitation of another, especially the imitation of money. Many states encountered problems with counterfeiters during the 1830s and 1840s. Arkansas was not without her ganges of counterfeiters who worked in the cities of Little Rock, Van Buren and Lewisburg. These gangs copied not only paper money but coins, corporation notes and bank notes
Facteurs d’ambiance, rendement et humanisation du travail
Malgré la mécanisation et la modernisation des moyens de production, il reste encore beaucoup à faire pour humaniser le travail.Everywhere in society efficiency has become the prevailing factor. Performance seems to be the result of a technical progress offering to everyone consumption goods formerly reserved to a minority. However those goods are too often obtained to the detriment of the moral and physical health of the workers. We are just beginning to understand that maximum performance is rarely the same as optimum performance.To soften the work and to make it more attracting materially, psychologically and moraly is basic duty and an economic necessity. The machine is indifferent to its environment. However man is strongly influenced by the psychological and material conditions prevailing in his milieu. He becomes a poor hand when insufficiently paid, badly administered, tired and not in good health.The physical environment in which man performs his tasks have a true influence on accidents, on the general climate of the firm, on the quality and on the quantity of his work. Contrary to the popular belief mecanization and modernization of the means of production have not entirely eliminated the problem of physical fatigue. On the one hand, this mecanization has often been made without even considering man's capabilities, comfort and fatigue. Many machines are not adapted to the worker especially regarding seats, signals and controls. On the other hand much work implying heavy weights still exists in industry.TEMPERATUREThe human body is particularly sensible to environmental temperature. According to physiologists the temperature should be held between 55° and 68° in ordinary industrial works while office temperature should be kept between 66° and 72°. For works performed under high temperatures longer breaks and rehydratation of the body must be favorized.NOISEThe influence of noise on the health of workers has become one of the main points in professionnal pathology. Besides hurting the ear excessively, intense noise disturbs the entire mecanism of the body. In addition to this, it has a bad influence on communications and therefore is a major cause of accidents, errors and absenteism.LIGHTINGGreat progress has been made in this field. The degree of light to be used depends upon the task to be performed. In order to be adequate it has to fulfill a few conditions:1.—sufficient intensity (1000 lux maximum for ordinary work);2.—the passing of light to shadow must not be too brutal; 3.—avoid excessive brilliancy and dazzling;4.—light must be well distributed and the installations well cleaned in order to avoid dusting.AIR COMPOSITIONThe air must be changed and purified in order to eliminate carbonic gaz. The hygrometric level must stand around 50% of normal saturation of water vapour. A few kinds of works require a filter and a vacuum-cleaning
Problèmes posés dans l’entreprise par l’éclairage des locaux
L'auteur établit l'importance de l'éclairage dans la production, définit la lumière du jour comme l'idéal à atteindre et admet la nécessité de recourir aux installations artificielles pour lesquelles elle établit un certain nombre de facteurs à prendre en considération.A bad lighting system leads to supplementary tiresome eye efforts and is often in addition the cause for nervous tension. It is therefore logical to say that a better lighting system will lead to a better perception and therefore to an increase in production. However lights are not the only factor influencing eye perception such as the nature of the job, the speed and accuracy required for production and the lenght of the operation. These will vary from firm to firm and even within the different departments within a plant. It is to be remembered also that eye accuracy diminishes as a person gets older.What kind of lighting system should be used? Day light is the ideal to seek, but since it is not always possible one has to consider a few factors in using artificial systems : the intensity, the job area, the diffusion, the contrasts, the shadows, the dazzling, the reflecting areas and the maintenance of the systems.The expenses brought about by an investment in adequate lighting will easily have much much larger yields. In the U.S., an investment equal to 5% of the total wage bill yields a 35% increase improduction. Lighting is therefore a very important but often forgotten factor influencing output
Les horaires flexibles
L'auteur présente les horaires flexibles, leurs avantages pour l'employeur et pour l'employé, leurs modalités d'application et les réactions de différentes parties à cette forme d'aménagement du temps de travail.For the last five years rigid working schedules have increasingly been under attack and many new experiences have been tried in many European countries, particularly in Germany and Switzeriand. The essence of these experiences has been to adapt working schedules to each worker through a flexible hour system. The basic principle of such a system is the free and individual choice of entry and exit time within certain limits. The flexible working hours system generally distinguishes three separate components to a working day : a core time when all employees must be at their job and two flexible time periods, at the beginning and at the end of the working day. Such a system has advantages for both the employer and the employee. As for the employer, such a system facilitates time Computing, encourages a decrease of short term absenteism and turnover, a reduction of internal traffic, a decrease of accidents on the way to work, a reduction of overtime, greater hiring advantages, and a longer service to the consumer. Moreover management workers may work in a more peaceful atmosphere, the social climate is ameliorated and internal conflicts are reduced. As for the employees, a reduction of transportation time has been noted, family and personal needs are given a better chance to be satisfied, and a change of attitude towards work was underlined.There is no best way to design and install such a system. There are many variations to it and adaptation is surely favorized under such a system. Experience, however, teaches some ground rules. First such a system much be progressively introduced. Experimentation is greatly encouraged. Second, it takes time for the system to give good results. Third, trial and error is often the best method. Fourth, rules must be established to avoid misunderstandings. Fifth, pragmatism is the golden rule. Sixth, a clear distinction must be made between exceeding hours and overtime. Seventh, a lot of information is necessary before and during the introduction of the system. Flexible working hours practically require a form of control. This control, however, should itself be as flexible and as discreet as possible. Self control is to be aimed at. Such a control can be made by a time card, posted or not, by a punch clock, by special individual meter or by computer. To the same extent that flexible working hour system is well accepted by employees, to the same extent does it find obstruction at the middle management level. That the system is applied to middle management is perceived as a move to put them on the same level as blue collar workers. But the basic reluctance of white collars comes from the revised notion of authority required by a flexible hour system. If one group needs particular attention when flexible hours are introduced, it is middle management. Eventhough early reluctance of unions has been greatly dissipated, they still feel that such a system decreases the possibility of human contacts and that the greater responsibility left to the workers is subtle moral constraint. Up to now, flexible hours have been very successful. This is not to say that they are a panacea nor that they will settle all personnel problems
Le travail Ă temps partiel
L'auteur définit et examine la notion de travail à temps partiel et en présente les différentes implications.Part-time employment has become a considerable phenomenon in the labour market in developed countries: 11 million in the USA, 9 million in the EEC and 1.3 million in Canada. And it is constantly growing.Three definitions apply to the sort of works: half-time employment; part-time employment which may be more or less than half-time; occasional or temporary employment which is full-time but of short duration.The groups mainly affected in developed countries are women, the handicap-ped, students and young people generally, as well as the aged. The first group, how-ever, is by far the largest comprising from 70% to 90% depending on the country concerned. The areas mainly affected are those of the public and para-public sectors, but the private sector can also be included although to a much lesser extent.The rational behind part-time employment can be described as economic, social and egalitarian. In the first case, it permits a better use of available abilities. In the second, it permits a better integration of man in society and favours fuller development of personality. Finally, it permits better use of women's abilities, and makes it possible for the society to benefit from their participation.There are several advantages in this type of employment: as concerns the employer, the employee, and particularly women. To take full advantage of it, nevertheless, a series of problems must be resolved: in the law, technical and organizational aspects, and in psychological attitudes.The French experience can be useful in this regard, for both its strong and weak points. A complete solution, however may be found in the following: a clarification of the nature of part-time employment as a social objective; a clarification of its best spheres of application; the avoidance of the establishment of a System of second class labour.Liaisons sociales: supplément au no 7850 du 91/78, 18-9-78 et au no 7814 du 19-7-78. HALLAIRE, Jean,Le travail à temps partiel, Bureau international du travail et dossier de presse 8-8-80. FAVARD, E.,« Pas de miracle avec le mi-temps », L'Expansion, décembre 1978
Evolution
The American Democracy Project hosts a Times Talk event on Thursday, September 12th at 12-1pm in the South Study Area of Forsyth Library. Catherine Sartin, Instructor of Biological Sciences, presents on the topic of Human Evolution. Free pizza and salad provided to the first 20 attendees
- …