Mechanics of Hydrogenated Amorphous Carbon Deposits from Electron-Beam-Induced Deposition of Paraffin Precursor

Many experiments on the mechanics of nanostructures require the creation of rigid clamps at specific locations. In this work, electron-beam-induced deposition(EBID) has been used to depositcarbonfilms that are similar to those that have recently been used for clamping nanostructures. The film deposition rate was accelerated by placing a paraffin source of hydrocarbon near the area where the EBIDdeposits were made. High-resolution transmission electron microscopy, electron-energy-loss spectroscopy, Raman spectroscopy, secondary-ion-mass spectrometry, and nanoindentation were used to characterize the chemical composition and the mechanics of the carbonaceous deposits. The typical EBIDdeposit was found to be hydrogenated amorphous carbon (a-C:H) having more sp2- than sp3-bonded carbon.Nanoindentation tests revealed a hardness of ∼4GPa and an elastic modulus of 30–60GPa, depending on the accelerating voltage. This reflects a relatively soft film, which is built out of precursor molecular ions impacting the growing surface layer with low energies. The use of such deposits as clamps for tensile tests of poly(acrylonitrile)-based carbon nanofibers loaded between opposing atomic force microscope cantilevers is presented as an example applicatio

Enhanced Electrospinning of Active Organic Fibers by Plasma Treatment on Conjugated Polymer Solutions

Realizing active, light-emitting fibers made of conjugated polymers by the electrospinning method is generally challenging. Electrospinning of plasma-treated conjugated polymer solutions is here developed for the production of light-emitting microfibers and nanofibers. Active fibers from conjugated polymer solutions rapidly processed by a cold atmospheric argon plasma are electrospun in an effective way, and they show a smoother surface and bead-less morphology, as well as preserved optical properties in terms of absorption, emission, and photoluminescence quantum yield. In addition, the polarization of emitted light and more notably photon waveguiding along the length of individual fibers are remarkably enhanced by electrospinning plasma-treated solutions. These properties come from a synergetic combination of favorable intermolecular coupling in the solutions, increased order of macromolecules on the nanoscale, and resulting fiber morphology. Such findings make the coupling of the electrospinning method and cold atmospheric plasma processing on conjugated polymer solutions a highly promising and possibly general route to generate light-emitting and conductive micro- and nanostructures for organic photonics and electronics

The role of parental achievement goals in predicting autonomy-supportive and controlling parenting

Although autonomy-supportive and controlling parenting are linked to numerous positive and negative child outcomes respectively, fewer studies have focused on their determinants. Drawing on achievement goal theory and self-determination theory, we propose that parental achievement goals (i.e., achievement goals that parents have for their children) can be mastery, performance-approach or performance-avoidance oriented and that types of goals predict mothers' tendency to adopt autonomy-supportive and controlling behaviors. A total of 67 mothers (aged 30-53 years) reported their goals for their adolescent (aged 13-16 years; 19.4 % girls), while their adolescent evaluated their mothers' behaviors. Hierarchical regression analyses showed that parental performance-approach goals predict more controlling parenting and prevent acknowledgement of feelings, one autonomy-supportive behavior. In addition, mothers who have mastery goals and who endorse performance-avoidance goals are less likely to use guilt-inducing criticisms. These findings were observed while controlling for the effect of maternal anxiety

Reinforcing medical authority: clinical ethics consultation and the resolution of conflicts in treatment decisions

Despite substantial efforts in the past 15 years to professionalise the field of clinical ethics consultation, sociologists have not re‐examined past hypotheses about the role of such services in medical decision‐making and their effect on physician authority. In relation to those hypotheses, we explore two questions: (i) What kinds of issues does ethics consultation resolve? and (ii) what is the nature of the resolution afforded by these consults? We examined ethics consultation records created between 2011 and mid‐2015 at a large tertiary care US hospital and found that in most cases, the problems addressed are not novel ethical dilemmas as classically conceived, but are instead disagreements between clinicians and patients or their surrogates about treatment. The resolution offered by a typical ethics consultation involves strategies to improve communication rather than the parsing of ethical obligations. In cases where disagreements persist, the proposed solution is most often based on technical clinical judgements, reinforcing the role of physician authority in patient care and the ethical decisions made about that care.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/154312/1/shil13003.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/154312/2/shil13003_am.pd

Multi-response analysis in the material characterisation of electrospun poly (lactic acid)/halloysite nanotube composite fibres based on Taguchi design of experiments: fibre diameter, non-intercalation and nucleation effects

Poly (lactic acid) (PLA)/halloysite nanotube (HNT) composite fibres were prepared by using a simple and versatile electrospinning technique. The systematic approach via Taguchi design of experiments (DoE) was implemented to investigate factorial effects of applied voltage, feed rate of solution, collector distance and HNT concentration on the fibre diameter, HNT non-intercalation and nucleation effects. The HNT intercalation level, composite fibre morphology, their associated fibre diameter and thermal properties were evaluated by means of X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), imaging analysis and differential scanning calorimetry (DSC), respectively. HNT non-intercalation phenomenon appears to be manifested as reflected by the minimal shift of XRD peaks for all electrospun PLA/HNT composite fibres. The smaller-fibre-diameter characteristic was found to be sequentially associated with the feed rate of solution, collector distance and applied voltage. The glass transition temperature (T g) and melting temperature (T m) are not highly affected by varying the material and electrospinning parameters. However, as the indicator of the nucleation effect, the crystallisation temperature (T c) of PLA/HNT composite fibres is predominantly impacted by HNT concentration and applied voltage. It is evident that HNT’s nucleating agent role is confirmed when embedded with HNTs to accelerate the cold crystallisation of composite fibres. Taguchi DoE method has been found to be an effective approach to statistically optimise critical parameters used in electrospinning in order to effectively tailor the resulting physical features and thermal properties of PLA/HNT composite fibres

Organizing Engineering Work - A Comparative-Analysis

This article analyzes the organization of engineering work in six industrial capitalist countries. It identifies four major models for the organization of engineering work; the engineering profession did not succeed in achieving professional “closure” in any of the six countries under review. A review of the historical evolution of the organization of engineering work in each of the six countries reveals that engineering has been shaped by a complex interaction among the profession itself, employers, the state, labor, and preindustrial forces. However, none of the national variations on the four models for organizing engineering labor is stable or without internal contradiction because of the ambiguous “intermediate” position of engineers

Mechanical Properties of Glassy Polyethylene Nanofibers via Molecular Dynamics Simulations

The extent to which the intrinsic mechanical properties of polymer fibers depend on physical size has been a matter of dispute that is relevant to most nanofiber applications. Here, we report the elastic and plastic properties determined from molecular dynamics simulations of amorphous, glassy polymer nanofibers with diameter ranging from 3.7 to 17.7 nm. We find that, for a given temperature, the Young’s elastic modulus E decreases with fiber radius and can be as much as 52% lower than that of the corresponding bulk material. Poisson’s ratio ν of the polymer comprising these nanofibers was found to decrease from a value of 0.3 to 0.1 with decreasing fiber radius. Our findings also indicate that a small but finite stress exists on the simulated nanofibers prior to elongation, attributable to surface tension. When strained uniaxially up to a tensile strain of ε = 0.2 over the range of strain rates and temperatures considered, the nanofibers exhibit a yield stress σy between 40 and 72 MPa, which is not strongly dependent on fiber radius; this yield stress is approximately half that of the same polyethylene simulated in the amorphous bulk.DuPont MIT AllianceDuPont (Firm) (Young Professor Award

multicenter cohort study

Publisher Copyright: © 2023 The Authors. Ultrasound in Obstetrics & Gynecology published by John Wiley & Sons Ltd on behalf of International Society of Ultrasound in Obstetrics and Gynecology.Objective: Monochorionic (MC) triplet pregnancies are extremely rare and information on these pregnancies and their complications is limited. We aimed to investigate the risk of early and late pregnancy complications, perinatal outcome and the timing and methods of fetal intervention in these pregnancies. Methods: This was a multicenter retrospective cohort study of MC triamniotic (TA) triplet pregnancies managed in 21 participating centers around the world from 2007 onwards. Data on maternal age, mode of conception, diagnosis of major fetal structural anomalies or aneuploidy, gestational age (GA) at diagnosis of anomalies, twin-to-twin transfusion syndrome (TTTS), twin anemia–polycythemia sequence (TAPS), twin reversed arterial perfusion (TRAP) sequence and or selective fetal growth restriction (sFGR) were retrieved from patient records. Data on antenatal interventions were collected, including data on selective fetal reduction (three to two or three to one), laser surgery and any other active fetal intervention (including amniodrainage). Data on perinatal outcome were collected, including numbers of live birth, intrauterine demise, neonatal death, perinatal death and termination of fetus or pregnancy (TOP). Neonatal data such as GA at birth, birth weight, admission to neonatal intensive care unit and neonatal morbidity were also collected. Perinatal outcomes were assessed according to whether the pregnancy was managed expectantly or underwent fetal intervention. Results: Of an initial cohort of 174 MCTA triplet pregnancies, 11 underwent early TOP, three had an early miscarriage, six were lost to follow-up and one was ongoing at the time of writing. Thus, the study cohort included 153 pregnancies, of which the majority (92.8%) were managed expectantly. The incidence of pregnancy affected by one or more fetal structural abnormality was 13.7% (21/153) and that of TRAP sequence was 5.2% (8/153). The most common antenatal complication related to chorionicity was TTTS, which affected just over one quarter (27.6%; 42/152, after removing a pregnancy with TOP < 24 weeks for fetal anomalies) of the pregnancies, followed by sFGR (16.4%; 25/152), while TAPS (spontaneous or post TTTS with or without laser treatment) occurred in only 4.6% (7/152) of pregnancies. No monochorionicity-related antenatal complication was recorded in 49.3% (75/152) of pregnancies. Survival was apparently associated largely with the development of these complications: there was at least one survivor beyond the neonatal period in 85.1% (57/67) of pregnancies without antenatal complications, in 100% (25/25) of those complicated by sFGR and in 47.6% (20/42) of those complicated by TTTS. The overall rate of preterm birth prior to 28 weeks was 14.5% (18/124) and that prior to 32 weeks' gestation was 49.2% (61/124). Conclusion: Monochorionicity-related complications, which can impact adversely perinatal outcome, occur in almost half of MCTA triplet pregnancies, creating a challenge with regard to counseling, surveillance and management.publishersversionpublishe

Perinatal outcome of monochorionic triamniotic triplet pregnancy: multicenter cohort study

Objective Monochorionic (MC) triplet pregnancies are extremely rare and information on these pregnancies and their complications is limited. We aimed to investigate the risk of early and late pregnancy complications, perinatal outcome and the timing and methods of fetal intervention in these pregnancies.Methods This was a multicenter retrospective cohort study of MC triamniotic (TA) triplet pregnancies managed in 21 participating centers around the world from 2007 onwards. Data on maternal age, mode of conception, diagnosis of major fetal structural anomalies or aneuploidy, gestational age (GA) at diagnosis of anomalies, twin-to-twin transfusion syndrome (TTTS), twin anemia-polycythemia sequence (TAPS), twin reversed arterial perfusion (TRAP) sequence and or selective fetal growth restriction (sFGR) were retrieved from patient records. Data on antenatal interventions were collected, including data on selective fetal reduction (three to two or three to one), laser surgery and any other active fetal intervention (including amniodrainage). Data on perinatal outcome were collected, including numbers of live birth, intrauterine demise, neonatal death, perinatal death and termination of fetus or pregnancy (TOP). Neonatal data such as GA at birth, birth weight, admission to neonatal intensive care unit and neonatal morbidity were also collected. Perinatal outcomes were assessed according to whether the pregnancy was managed expectantly or underwent fetal intervention.Results Of an initial cohort of 174 MCTA triplet pregnancies, 11 underwent early TOP, three had an early miscarriage, six were lost to follow-up and one was ongoing at the time of writing. Thus, the study cohort included 153 pregnancies, of which the majority (92.8%) were managed expectantly. The incidence of pregnancy affected by one or more fetal structural abnormality was 13.7% (21/153) and that of TRAP sequence was 5.2% (8/153). The most common antenatal complication related to chorionicity was TTTS, which affected just over one quarter (27.6%; 42/152, after removing a pregnancy with TOP < 24 weeks for fetal anomalies) of the pregnancies, followed by sFGR (16.4%; 25/152), while TAPS (spontaneous or post TTTS with or without laser treatment) occurred in only 4.6% (7/152) of pregnancies. No monochorionicity-related antenatal complication was recorded in 49.3% (75/152) of pregnancies. Survival was apparently associated largely with the development of these complications: there was at least one survivor beyond the neonatal period in 85.1% (57/67) of pregnancies without antenatal complications, in 100% (25/25) of those complicated by sFGR and in 47.6% (20/42) of those complicated by TTTS. The overall rate of preterm birth prior to 28 weeks was 14.5% (18/124) and that prior to 32 weeks' gestation was 49.2% (61/124).Conclusion Monochorionicity-related complications, which can impact adversely perinatal outcome, occur in almost half of MCTA triplet pregnancies, creating a challenge with regard to counseling, surveillance and management. (c) 2023 The Authors. Ultrasound in Obstetrics & Gynecology published by John Wiley & Sons Ltd on behalf of International Society of Ultrasound in Obstetrics and Gynecology

Prisoners of the Capitalist Machine: Captivity and the Corporate Engineer

This chapter will focus on how engineering practice is conditioned by an economic system which promotes production for profit and economic growth as an end in itself. As such it will focus on the notion of the captivity of engineering which emanates from features of the economic system. By drawing on Critical Realism and a Marxist literature, and by focusing on the issues of safety and sustainability (in particular the issue of climate change), it will examine the extent to which disasters and workplace accidents result from the economic imperative for profitable production and how efforts by engineers to address climate change are undermined by an on-going commitment to growth. It will conclude by arguing that the structural constraints on engineering practice require new approaches to teaching engineers about ethics and social responsibility. It will argue that Critical Realism offers a framework for the teaching of engineering ethics which would pay proper attention to the structural context of engineers work without eliminating the possibility of engineers working for radical change