Higher In vitro Proliferation Rate of Rhizopus oryzae in Blood of Diabetic Individuals in Chronic Glycaemic Control Compared with Non-diabetic Individuals

We thank all members of the Laboratory of Clinical Microbiology in the Hospital General Dr. Manuel Gea González, Instituto Nacional de Rehabilitacion and Hospital General de México. Also, thanks to the Wellcome Trust Strategic Award, corresponding author’s scholarship sponsor. Financial Support This study did not have pharmaceutical or grant support, and resources were obtained from institutional budgets.Peer reviewedPublisher PD

Introduction of Building Information Modeling in industrial engineering education: students’ perception

Producción CientíficaThe building information modeling (BIM) methodology is becoming a mandatory requirement in the development of projects within the world context. Consequently, technical schools have been introducing BIM in their curricula. The present study aims to evaluate student perceptions concerning the advantages and difficulties of incorporating BIM into the formal teaching system as part of the degree in industrial engineering. Students’ understanding and satisfaction were analyzed while using BIM in the development of the practical component of a didactic industrial project. The evaluation was based on a Likert survey with five levels, and the results were interpreted using a factor analysis and ascending hierarchical classification. To identify possible relationships between student satisfaction with the BIM implementation and the factors obtained, a multiple regression analysis was performed. It was determined that students have a high perception of BIM utility and consider the use of the BIM tool that is intuitive and easy to learn, including during the autonomous learning process. The results show a direct correlation between the benefits of BIM implementation in industrial projects and the advantages of defining teamwork within collaborative projects. The incorporation of BIM as a mandatory subject in the industrial engineering curriculum appears to be successful, and the results are encouraging

Academic proposal for heritage intervention in a BIM environment for a 19th century flour factory

Producción CientíficaThe implementation of building information modeling (BIM) has become a reality worldwide, not only because of the advantages it offers, but also because of the obligatory nature of its use in construction and civil engineering projects in various countries around the world. An intervention project on an industrial heritage property requires a methodology that considers the condition of the building over time and its value for new use. The advantages of working with a precise 3D model that integrates engineering data in a collaborative work environment makes BIM and heritage BIM (HBIM) very useful tools in a project whose objective is the recovery of an industrial heritage real estate property. This work is part of the academic implementation of BIM in university technical education centers and aims to establish a methodology for shared and collaborative group work in a BIM environment through a Spanish industrial heritage case study of a flour factory dating to 1865. A rigorous historical study and the elaboration of a central BIM model loaded with real content on the industrial complex have allowed the immersion of the students into the BIM methodology, as well as the generation of a value proposition for the exploitation of the factory

A Multiple Stakeholder Multicriteria Decision Analysis in Diabetic Macular Edema Management: The MULTIDEX‑EMD Study

Background The clinical and economic management of retinal diseases has become more complex following the introduction of new intravitreal treatments. Multicriteria decision analysis (MCDA) offers the potential to overcome the challenges associated with traditional decision-making tools. Objectives A MCDA to determine the most relevant criteria to decision-making in the management of diabetic macular edema (DME) based on the perspectives of multiple stakeholders in Spain was developed. This MCDA was termed the MULTIDEX-EMD study. Methods Nineteen stakeholders (7 physicians, 4 pharmacists, 5 health authorities and health management experts, 1 psychologist, and 2 patient representatives) participated in this three-phase project. In phase A, an advisory board defined all of the criteria that could influence DME treatment decision-making. These criteria were then screened using a discrete choice experiment (DCE) (phase B). Next, a multinomial logit model was fitted by applying the backward elimination algorithm (relevant criteria: p value = 15 letters (p value < 0.001), effect duration per administration (p value = 0.008), retinal detachment (p value < 0.001), endophthalmitis (p value = 0.012), myocardial infarction (p value < 0.001), intravitreal hemorrhage (p value = 0.021), annual treatment cost per patient (p value = 0.001), health-related quality of life (HRQoL) (p value = 0.004), and disability level (p value = 0.021). Conclusions From a multi-stakeholder perspective, the selection of an appropriate treatment for DME patients should guarantee patient safety and maximize the visual acuity improvement and treatment effect duration. It should also contribute to system sustainability by being affordable, it should have a positive impact on HRQoL, and it should prevent disability

Trabecular bone score in active or former smokers with and without COPD

Background Smoking is a recognized risk factor for osteoporosis. Trabecular bone score (TBS) is a novel texture parameter to evaluate bone microarchitecture. TBS and their main determinants are unknown in active and former smokers. Objective To assess TBS in a population of active or former smokers with and without Chronic Obstructive Pulmonary Disease (COPD) and to determine its predictive factors. Methods Active and former smokers from a pulmonary clinic were invited to participate. Clinical features were recorded and bone turnover markers (BTMs) measured. Lung function, low dose chest Computed Tomography scans (LDCT), dual energy absorptiometry (DXA) scans were performed and TBS measured. Logistic regression analysis explored the relationship between measured parameters and TBS. Results One hundred and forty five patients were included in the analysis, 97 (67.8%) with COPD. TBS was lower in COPD patients (median 1.323; IQR: 0.13 vs 1.48; IQR: 0.16, p = 0.003). Regression analysis showed that a higher body mass index (BMI), younger age, less number of exacerbations and a higher forced expiratory volume-one second (FEV1%) was associated with better TBS (β = 0.005, 95% CI:0.000–0.011, p = 0.032; β = -0.003, 95% CI:-0.007(-)-0.000, p = 0.008; β = -0.019, 95% CI:-0.034(-)-0.004, p = 0.015; β = 0.001, 95% CI:0.000–0.002, p = 0.012 respectively). The same factors with similar results were found in COPD patients. Conclusions A significant proportion of active and former smokers with and without COPD have an affected TBS. BMI, age, number of exacerbations and the degree of airway obstruction predicts TBS values in smokers with and without COPD. This important information should be considered when evaluating smokers at risk of osteoporosis

Early lung cancer detection using spiral computed tomography and positron emission tomography

RATIONALE: Lung cancer screening using computed tomography (CT) is effective in detecting lung cancer in early stages. Concerns regarding false-positive rates and unnecessary invasive procedures have been raised. OBJECTIVE: To study the efficiency of a lung cancer protocol using spiral CT and F-18-fluorodeoxyglucose positron emission tomography (FDG-PET). METHODS: High-risk individuals underwent screening with annual spiral CTs. Follow-up CTs were done for noncalcified nodules of 5 mm or greater, and FDG-PET was done for nodules 10 mm or larger or smaller (> 7 mm), growing nodules. RESULTS: A total of 911 individuals completed a baseline CT study and 424 had at least one annual follow-up study. Of the former, 14% had noncalcified nodules of 5 mm or larger, and 3.6% had nodules of 10 mm or larger. Eleven non-small cell lung cancers (NSCLC) and one small cell lung cancer (SCLC) were diagnosed in the baseline study (prevalence rate, 1.32%), and two NSCLCs in the annual study (incidence rate, 0.47%). All NSCLCs (92% of prevalence cancers) were diagnosed in stage I (12 stage IA, 1 stage IB). FDG-PET was helpful for the correct diagnosis in 19 of 25 indeterminate nodules. The sensitivity, specificity, positive predictive value, and negative predictive value of FDG-PET for the diagnosis of malignancy were 69, 91, 90, and 71%, respectively. However, the sensitivity and negative predictive value of the screening algorithm, which included a 3-month follow-up CT for nodules with a negative FDG-PET, was 100%. CONCLUSION: A protocol for early lung cancer detection using spiral CT and FDG-PET is useful and may minimize unnecessary invasive procedures for benign lesions

A multiple stakeholder multicriteria decision analysis in diabetic macular edema management: the MULTIDEX‑EMD study

Background The clinical and economic management of retinal diseases has become more complex following the introduction of new intravitreal treatments. Multicriteria decision analysis (MCDA) ofers the potential to overcome the challenges associated with traditional decision-making tools. Objectives A MCDA to determine the most relevant criteria to decision-making in the management of diabetic macular edema (DME) based on the perspectives of multiple stakeholders in Spain was developed. This MCDA was termed the MULTIDEX-EMD study. Methods Nineteen stakeholders (7 physicians, 4 pharmacists, 5 health authorities and health management experts, 1 psychologist, and 2 patient representatives) participated in this three-phase project. In phase A, an advisory board defned all of the criteria that could infuence DME treatment decision-making. These criteria were then screened using a discrete choice experiment (DCE) (phase B). Next, a multinomial logit model was ftted by applying the backward elimination algorithm (relevant criteria: p value<0.05). Finally, the results were discussed in a deliberative process (phase C). Results Thirty-one criteria were initially defned (phase A) and grouped into 5 categories: efcacy/efectiveness, safety, organizational and economic impact, patient-reported outcomes, and other therapeutic features. The DCE results (phase B) showed that 10 criteria were relevant to the decision-making process for a 50- to 65-year-old DME patient: mean change in best corrected visual acuity (p value<0.001), percentage of patients with an improvement of ≥15 letters (p value<0.001), efect duration per administration (p value=0.008), retinal detachment (p value<0.001), endophthalmitis (p value=0.012), myocardial infarction (p value<0.001), intravitreal hemorrhage (p value=0.021), annual treatment cost per patient (p value=0.001), health-related quality of life (HRQoL) (p value=0.004), and disability level (p value=0.021). Conclusions From a multi-stakeholder perspective, the selection of an appropriate treatment for DME patients should guarantee patient safety and maximize the visual acuity improvement and treatment efect duration. It should also contribute to system sustainability by being afordable, it should have a positive impact on HRQoL, and it should prevent disability

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals &lt;1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data